[PATCH 1/3] usb: pci-quirks: group AMD specific quirk code together

[PATCH 1/3] usb: pci-quirks: group AMD specific quirk code together

[Niklas Schnelle]

A follow on patch will introduce CONFIG_USB_PCI_AMD governing the AMD
quirk and adding its compile time dependency on HAS_IOPORT. In order to
minimize the number of #ifdefs in C files and make that patch easier
to read first group the code together. This is pure code movement
no functional change is intended.

Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
---
 drivers/usb/host/pci-quirks.c | 119 +++++++++++++++++-----------------
 drivers/usb/host/pci-quirks.h |  14 ++--
 2 files changed, 68 insertions(+), 65 deletions(-)

diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index 2665832f9add..5e06fad82a22 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -60,6 +60,22 @@
 #define EHCI_USBLEGCTLSTS	4		/* legacy control/status */
 #define EHCI_USBLEGCTLSTS_SOOE	(1 << 13)	/* SMI on ownership change */
 
+/* ASMEDIA quirk use */
+#define ASMT_DATA_WRITE0_REG	0xF8
+#define ASMT_DATA_WRITE1_REG	0xFC
+#define ASMT_CONTROL_REG	0xE0
+#define ASMT_CONTROL_WRITE_BIT	0x02
+#define ASMT_WRITEREG_CMD	0x10423
+#define ASMT_FLOWCTL_ADDR	0xFA30
+#define ASMT_FLOWCTL_DATA	0xBA
+#define ASMT_PSEUDO_DATA	0
+
+/* Intel quirk use */
+#define USB_INTEL_XUSB2PR      0xD0
+#define USB_INTEL_USB2PRM      0xD4
+#define USB_INTEL_USB3_PSSEN   0xD8
+#define USB_INTEL_USB3PRM      0xDC
+
 /* AMD quirk use */
 #define	AB_REG_BAR_LOW		0xe0
 #define	AB_REG_BAR_HIGH		0xe1
@@ -93,21 +109,6 @@
 #define	NB_PIF0_PWRDOWN_0	0x01100012
 #define	NB_PIF0_PWRDOWN_1	0x01100013
 
-#define USB_INTEL_XUSB2PR      0xD0
-#define USB_INTEL_USB2PRM      0xD4
-#define USB_INTEL_USB3_PSSEN   0xD8
-#define USB_INTEL_USB3PRM      0xDC
-
-/* ASMEDIA quirk use */
-#define ASMT_DATA_WRITE0_REG	0xF8
-#define ASMT_DATA_WRITE1_REG	0xFC
-#define ASMT_CONTROL_REG	0xE0
-#define ASMT_CONTROL_WRITE_BIT	0x02
-#define ASMT_WRITEREG_CMD	0x10423
-#define ASMT_FLOWCTL_ADDR	0xFA30
-#define ASMT_FLOWCTL_DATA	0xBA
-#define ASMT_PSEUDO_DATA	0
-
 /*
  * amd_chipset_gen values represent AMD different chipset generations
  */
@@ -458,50 +459,6 @@ void usb_amd_quirk_pll_disable(void)
 }
 EXPORT_SYMBOL_GPL(usb_amd_quirk_pll_disable);
 
-static int usb_asmedia_wait_write(struct pci_dev *pdev)
-{
-	unsigned long retry_count;
-	unsigned char value;
-
-	for (retry_count = 1000; retry_count > 0; --retry_count) {
-
-		pci_read_config_byte(pdev, ASMT_CONTROL_REG, &value);
-
-		if (value == 0xff) {
-			dev_err(&pdev->dev, "%s: check_ready ERROR", __func__);
-			return -EIO;
-		}
-
-		if ((value & ASMT_CONTROL_WRITE_BIT) == 0)
-			return 0;
-
-		udelay(50);
-	}
-
-	dev_warn(&pdev->dev, "%s: check_write_ready timeout", __func__);
-	return -ETIMEDOUT;
-}
-
-void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev)
-{
-	if (usb_asmedia_wait_write(pdev) != 0)
-		return;
-
-	/* send command and address to device */
-	pci_write_config_dword(pdev, ASMT_DATA_WRITE0_REG, ASMT_WRITEREG_CMD);
-	pci_write_config_dword(pdev, ASMT_DATA_WRITE1_REG, ASMT_FLOWCTL_ADDR);
-	pci_write_config_byte(pdev, ASMT_CONTROL_REG, ASMT_CONTROL_WRITE_BIT);
-
-	if (usb_asmedia_wait_write(pdev) != 0)
-		return;
-
-	/* send data to device */
-	pci_write_config_dword(pdev, ASMT_DATA_WRITE0_REG, ASMT_FLOWCTL_DATA);
-	pci_write_config_dword(pdev, ASMT_DATA_WRITE1_REG, ASMT_PSEUDO_DATA);
-	pci_write_config_byte(pdev, ASMT_CONTROL_REG, ASMT_CONTROL_WRITE_BIT);
-}
-EXPORT_SYMBOL_GPL(usb_asmedia_modifyflowcontrol);
-
 void usb_amd_quirk_pll_enable(void)
 {
 	usb_amd_quirk_pll(0);
@@ -631,6 +588,50 @@ bool usb_amd_pt_check_port(struct device *device, int port)
 }
 EXPORT_SYMBOL_GPL(usb_amd_pt_check_port);
 
+static int usb_asmedia_wait_write(struct pci_dev *pdev)
+{
+	unsigned long retry_count;
+	unsigned char value;
+
+	for (retry_count = 1000; retry_count > 0; --retry_count) {
+
+		pci_read_config_byte(pdev, ASMT_CONTROL_REG, &value);
+
+		if (value == 0xff) {
+			dev_err(&pdev->dev, "%s: check_ready ERROR", __func__);
+			return -EIO;
+		}
+
+		if ((value & ASMT_CONTROL_WRITE_BIT) == 0)
+			return 0;
+
+		udelay(50);
+	}
+
+	dev_warn(&pdev->dev, "%s: check_write_ready timeout", __func__);
+	return -ETIMEDOUT;
+}
+
+void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev)
+{
+	if (usb_asmedia_wait_write(pdev) != 0)
+		return;
+
+	/* send command and address to device */
+	pci_write_config_dword(pdev, ASMT_DATA_WRITE0_REG, ASMT_WRITEREG_CMD);
+	pci_write_config_dword(pdev, ASMT_DATA_WRITE1_REG, ASMT_FLOWCTL_ADDR);
+	pci_write_config_byte(pdev, ASMT_CONTROL_REG, ASMT_CONTROL_WRITE_BIT);
+
+	if (usb_asmedia_wait_write(pdev) != 0)
+		return;
+
+	/* send data to device */
+	pci_write_config_dword(pdev, ASMT_DATA_WRITE0_REG, ASMT_FLOWCTL_DATA);
+	pci_write_config_dword(pdev, ASMT_DATA_WRITE1_REG, ASMT_PSEUDO_DATA);
+	pci_write_config_byte(pdev, ASMT_CONTROL_REG, ASMT_CONTROL_WRITE_BIT);
+}
+EXPORT_SYMBOL_GPL(usb_asmedia_modifyflowcontrol);
+
 /*
  * Make sure the controller is completely inactive, unable to
  * generate interrupts or do DMA.
diff --git a/drivers/usb/host/pci-quirks.h b/drivers/usb/host/pci-quirks.h
index e729de21fad7..cde2263a9d2e 100644
--- a/drivers/usb/host/pci-quirks.h
+++ b/drivers/usb/host/pci-quirks.h
@@ -3,8 +3,6 @@
 #define __LINUX_USB_PCI_QUIRKS_H
 
 #ifdef CONFIG_USB_PCI
-void uhci_reset_hc(struct pci_dev *pdev, unsigned long base);
-int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base);
 int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *pdev);
 bool usb_amd_hang_symptom_quirk(void);
 bool usb_amd_prefetch_quirk(void);
@@ -12,23 +10,27 @@ void usb_amd_dev_put(void);
 bool usb_amd_quirk_pll_check(void);
 void usb_amd_quirk_pll_disable(void);
 void usb_amd_quirk_pll_enable(void);
+void sb800_prefetch(struct device *dev, int on);
+bool usb_amd_pt_check_port(struct device *device, int port);
+
+void uhci_reset_hc(struct pci_dev *pdev, unsigned long base);
+int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base);
 void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev);
 void usb_enable_intel_xhci_ports(struct pci_dev *xhci_pdev);
 void usb_disable_xhci_ports(struct pci_dev *xhci_pdev);
-void sb800_prefetch(struct device *dev, int on);
-bool usb_amd_pt_check_port(struct device *device, int port);
 #else
 struct pci_dev;
 static inline void usb_amd_quirk_pll_disable(void) {}
 static inline void usb_amd_quirk_pll_enable(void) {}
-static inline void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev) {}
 static inline void usb_amd_dev_put(void) {}
-static inline void usb_disable_xhci_ports(struct pci_dev *xhci_pdev) {}
 static inline void sb800_prefetch(struct device *dev, int on) {}
 static inline bool usb_amd_pt_check_port(struct device *device, int port)
 {
 	return false;
 }
+
+static inline void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev) {}
+static inline void usb_disable_xhci_ports(struct pci_dev *xhci_pdev) {}
 #endif  /* CONFIG_USB_PCI */
 
 #endif  /*  __LINUX_USB_PCI_QUIRKS_H  */
-- 
2.39.2

[PATCH 2/3] usb: pci-quirks: handle HAS_IOPORT dependency for AMD quirk

[Niklas Schnelle]

In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
not being declared. In the pci-quirks case the I/O port acceses are
used in the quirks for several AMD south bridges, Add a config option
for the AMD quirks to depend on HAS_IOPORT and #ifdef the quirk code.

Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
---
 drivers/usb/Kconfig           | 10 ++++++++++
 drivers/usb/core/hcd-pci.c    |  3 +--
 drivers/usb/host/pci-quirks.c |  2 ++
 drivers/usb/host/pci-quirks.h | 34 ++++++++++++++++++++++++----------
 include/linux/usb/hcd.h       | 17 +++++++++++++++++
 5 files changed, 54 insertions(+), 12 deletions(-)

diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index 7f33bcc315f2..abf8c6cdea9e 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -91,6 +91,16 @@ config USB_PCI
 	  If you have such a device you may say N here and PCI related code
 	  will not be built in the USB driver.
 
+config USB_PCI_AMD
+	bool "AMD PCI USB host support"
+	depends on USB_PCI && HAS_IOPORT
+	default X86 || MACH_LOONGSON64 || PPC_PASEMI
+	help
+	  Enable workarounds for USB implementation quirks in SB600/SB700/SB800
+	  and later south bridge implementations. These are common on x86 PCs
+	  with AMD CPUs but rarely used elsewhere, with the exception of a few
+	  powerpc and mips desktop machines.
+
 if USB
 
 source "drivers/usb/core/Kconfig"
diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
index 990280688b25..ee3156f49533 100644
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -206,8 +206,7 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct hc_driver *driver)
 		goto free_irq_vectors;
 	}
 
-	hcd->amd_resume_bug = (usb_hcd_amd_remote_wakeup_quirk(dev) &&
-			driver->flags & (HCD_USB11 | HCD_USB3)) ? 1 : 0;
+	hcd->amd_resume_bug = usb_hcd_amd_resume_bug(dev, driver);
 
 	if (driver->flags & HCD_MEMORY) {
 		/* EHCI, OHCI */
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index 5e06fad82a22..10813096d00c 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -76,6 +76,7 @@
 #define USB_INTEL_USB3_PSSEN   0xD8
 #define USB_INTEL_USB3PRM      0xDC
 
+#ifdef CONFIG_USB_PCI_AMD
 /* AMD quirk use */
 #define	AB_REG_BAR_LOW		0xe0
 #define	AB_REG_BAR_HIGH		0xe1
@@ -587,6 +588,7 @@ bool usb_amd_pt_check_port(struct device *device, int port)
 	return !(value & BIT(port_shift));
 }
 EXPORT_SYMBOL_GPL(usb_amd_pt_check_port);
+#endif /* CONFIG_USB_PCI_AMD */
 
 static int usb_asmedia_wait_write(struct pci_dev *pdev)
 {
diff --git a/drivers/usb/host/pci-quirks.h b/drivers/usb/host/pci-quirks.h
index cde2263a9d2e..a5230b0b9e91 100644
--- a/drivers/usb/host/pci-quirks.h
+++ b/drivers/usb/host/pci-quirks.h
@@ -2,7 +2,7 @@
 #ifndef __LINUX_USB_PCI_QUIRKS_H
 #define __LINUX_USB_PCI_QUIRKS_H
 
-#ifdef CONFIG_USB_PCI
+#ifdef CONFIG_USB_PCI_AMD
 int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *pdev);
 bool usb_amd_hang_symptom_quirk(void);
 bool usb_amd_prefetch_quirk(void);
@@ -12,7 +12,30 @@ void usb_amd_quirk_pll_disable(void);
 void usb_amd_quirk_pll_enable(void);
 void sb800_prefetch(struct device *dev, int on);
 bool usb_amd_pt_check_port(struct device *device, int port);
+#else
+static inline bool usb_amd_hang_symptom_quirk(void)
+{
+	return false;
+};
+static inline bool usb_amd_prefetch_quirk(void)
+{
+	return false;
+}
+static inline void usb_amd_quirk_pll_disable(void) {}
+static inline void usb_amd_quirk_pll_enable(void) {}
+static inline void usb_amd_dev_put(void) {}
+static inline bool usb_amd_quirk_pll_check(void)
+{
+	return false;
+}
+static inline void sb800_prefetch(struct device *dev, int on) {}
+static inline bool usb_amd_pt_check_port(struct device *device, int port)
+{
+	return false;
+}
+#endif /* CONFIG_USB_PCI_AMD */
 
+#ifdef CONFIG_USB_PCI
 void uhci_reset_hc(struct pci_dev *pdev, unsigned long base);
 int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base);
 void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev);
@@ -20,15 +43,6 @@ void usb_enable_intel_xhci_ports(struct pci_dev *xhci_pdev);
 void usb_disable_xhci_ports(struct pci_dev *xhci_pdev);
 #else
 struct pci_dev;
-static inline void usb_amd_quirk_pll_disable(void) {}
-static inline void usb_amd_quirk_pll_enable(void) {}
-static inline void usb_amd_dev_put(void) {}
-static inline void sb800_prefetch(struct device *dev, int on) {}
-static inline bool usb_amd_pt_check_port(struct device *device, int port)
-{
-	return false;
-}
-
 static inline void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev) {}
 static inline void usb_disable_xhci_ports(struct pci_dev *xhci_pdev) {}
 #endif  /* CONFIG_USB_PCI */
diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h
index 61d4f0b793dc..00724b4f6e12 100644
--- a/include/linux/usb/hcd.h
+++ b/include/linux/usb/hcd.h
@@ -484,8 +484,25 @@ extern int usb_hcd_pci_probe(struct pci_dev *dev,
 extern void usb_hcd_pci_remove(struct pci_dev *dev);
 extern void usb_hcd_pci_shutdown(struct pci_dev *dev);
 
+#ifdef CONFIG_USB_PCI_AMD
 extern int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *dev);
 
+static inline bool usb_hcd_amd_resume_bug(struct pci_dev *dev,
+					  const struct hc_driver *driver)
+{
+	if (!usb_hcd_amd_remote_wakeup_quirk(dev))
+		return false;
+	if (driver->flags & (HCD_USB11 | HCD_USB3))
+		return true;
+	return false;
+}
+#else /* CONFIG_USB_PCI_AMD */
+static inline bool usb_hcd_amd_resume_bug(struct pci_dev *dev,
+					  const struct hc_driver *driver)
+{
+	return false;
+}
+#endif
 extern const struct dev_pm_ops usb_hcd_pci_pm_ops;
 #endif /* CONFIG_USB_PCI */
 
-- 
2.39.2

[PATCH 3/3] usb: pci-quirks: handle HAS_IOPORT dependency for UHCI handoff

[Niklas Schnelle]

In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
not being declared. With the AMD quirk handled USB PCI quirks still use
inw() in uhci_check_and_reset_hc() and thus indirectly in
quirk_usb_handoff_uhci(). Handle this by conditionally compiling
uhci_check_and_reset_hc() and stubbing out quirk_usb_handoff_uhci() when
HAS_IOPORT is not available.

Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
---
 drivers/usb/host/pci-quirks.c | 23 ++++++++++++++++-------
 1 file changed, 16 insertions(+), 7 deletions(-)

diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index 10813096d00c..1f9c1b1435d8 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -634,6 +634,16 @@ void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev)
 }
 EXPORT_SYMBOL_GPL(usb_asmedia_modifyflowcontrol);
 
+static inline int io_type_enabled(struct pci_dev *pdev, unsigned int mask)
+{
+	u16 cmd;
+
+	return !pci_read_config_word(pdev, PCI_COMMAND, &cmd) && (cmd & mask);
+}
+
+#define mmio_enabled(dev) io_type_enabled(dev, PCI_COMMAND_MEMORY)
+
+#if defined(CONFIG_HAS_IOPORT) && IS_ENABLED(CONFIG_USB_UHCI_HCD)
 /*
  * Make sure the controller is completely inactive, unable to
  * generate interrupts or do DMA.
@@ -715,14 +725,7 @@ int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base)
 }
 EXPORT_SYMBOL_GPL(uhci_check_and_reset_hc);
 
-static inline int io_type_enabled(struct pci_dev *pdev, unsigned int mask)
-{
-	u16 cmd;
-	return !pci_read_config_word(pdev, PCI_COMMAND, &cmd) && (cmd & mask);
-}
-
 #define pio_enabled(dev) io_type_enabled(dev, PCI_COMMAND_IO)
-#define mmio_enabled(dev) io_type_enabled(dev, PCI_COMMAND_MEMORY)
 
 static void quirk_usb_handoff_uhci(struct pci_dev *pdev)
 {
@@ -742,6 +745,12 @@ static void quirk_usb_handoff_uhci(struct pci_dev *pdev)
 		uhci_check_and_reset_hc(pdev, base);
 }
 
+#else /* defined(CONFIG_HAS_IOPORT && IS_ENABLED(CONFIG_USB_UHCI_HCD) */
+
+static void quirk_usb_handoff_uhci(struct pci_dev *pdev) {}
+
+#endif /* defined(CONFIG_HAS_IOPORT && IS_ENABLED(CONFIG_USB_UHCI_HCD) */
+
 static int mmio_resource_enabled(struct pci_dev *pdev, int idx)
 {
 	return pci_resource_start(pdev, idx) && mmio_enabled(pdev);
-- 
2.39.2

[PATCH 1/3] usb: pci-quirks: group AMD specific quirk code together

[Niklas Schnelle]

A follow on patch will introduce CONFIG_USB_PCI_AMD governing the AMD
quirk and adding its compile time dependency on HAS_IOPORT. In order to
minimize the number of #ifdefs in C files and make that patch easier
to read first group the code together. This is pure code movement
no functional change is intended.

Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
---
 drivers/usb/host/pci-quirks.c | 119 +++++++++++++++++-----------------
 drivers/usb/host/pci-quirks.h |  14 ++--
 2 files changed, 68 insertions(+), 65 deletions(-)

diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index 2665832f9add..5e06fad82a22 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -60,6 +60,22 @@
 #define EHCI_USBLEGCTLSTS	4		/* legacy control/status */
 #define EHCI_USBLEGCTLSTS_SOOE	(1 << 13)	/* SMI on ownership change */
 
+/* ASMEDIA quirk use */
+#define ASMT_DATA_WRITE0_REG	0xF8
+#define ASMT_DATA_WRITE1_REG	0xFC
+#define ASMT_CONTROL_REG	0xE0
+#define ASMT_CONTROL_WRITE_BIT	0x02
+#define ASMT_WRITEREG_CMD	0x10423
+#define ASMT_FLOWCTL_ADDR	0xFA30
+#define ASMT_FLOWCTL_DATA	0xBA
+#define ASMT_PSEUDO_DATA	0
+
+/* Intel quirk use */
+#define USB_INTEL_XUSB2PR      0xD0
+#define USB_INTEL_USB2PRM      0xD4
+#define USB_INTEL_USB3_PSSEN   0xD8
+#define USB_INTEL_USB3PRM      0xDC
+
 /* AMD quirk use */
 #define	AB_REG_BAR_LOW		0xe0
 #define	AB_REG_BAR_HIGH		0xe1
@@ -93,21 +109,6 @@
 #define	NB_PIF0_PWRDOWN_0	0x01100012
 #define	NB_PIF0_PWRDOWN_1	0x01100013
 
-#define USB_INTEL_XUSB2PR      0xD0
-#define USB_INTEL_USB2PRM      0xD4
-#define USB_INTEL_USB3_PSSEN   0xD8
-#define USB_INTEL_USB3PRM      0xDC
-
-/* ASMEDIA quirk use */
-#define ASMT_DATA_WRITE0_REG	0xF8
-#define ASMT_DATA_WRITE1_REG	0xFC
-#define ASMT_CONTROL_REG	0xE0
-#define ASMT_CONTROL_WRITE_BIT	0x02
-#define ASMT_WRITEREG_CMD	0x10423
-#define ASMT_FLOWCTL_ADDR	0xFA30
-#define ASMT_FLOWCTL_DATA	0xBA
-#define ASMT_PSEUDO_DATA	0
-
 /*
  * amd_chipset_gen values represent AMD different chipset generations
  */
@@ -458,50 +459,6 @@ void usb_amd_quirk_pll_disable(void)
 }
 EXPORT_SYMBOL_GPL(usb_amd_quirk_pll_disable);
 
-static int usb_asmedia_wait_write(struct pci_dev *pdev)
-{
-	unsigned long retry_count;
-	unsigned char value;
-
-	for (retry_count = 1000; retry_count > 0; --retry_count) {
-
-		pci_read_config_byte(pdev, ASMT_CONTROL_REG, &value);
-
-		if (value == 0xff) {
-			dev_err(&pdev->dev, "%s: check_ready ERROR", __func__);
-			return -EIO;
-		}
-
-		if ((value & ASMT_CONTROL_WRITE_BIT) == 0)
-			return 0;
-
-		udelay(50);
-	}
-
-	dev_warn(&pdev->dev, "%s: check_write_ready timeout", __func__);
-	return -ETIMEDOUT;
-}
-
-void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev)
-{
-	if (usb_asmedia_wait_write(pdev) != 0)
-		return;
-
-	/* send command and address to device */
-	pci_write_config_dword(pdev, ASMT_DATA_WRITE0_REG, ASMT_WRITEREG_CMD);
-	pci_write_config_dword(pdev, ASMT_DATA_WRITE1_REG, ASMT_FLOWCTL_ADDR);
-	pci_write_config_byte(pdev, ASMT_CONTROL_REG, ASMT_CONTROL_WRITE_BIT);
-
-	if (usb_asmedia_wait_write(pdev) != 0)
-		return;
-
-	/* send data to device */
-	pci_write_config_dword(pdev, ASMT_DATA_WRITE0_REG, ASMT_FLOWCTL_DATA);
-	pci_write_config_dword(pdev, ASMT_DATA_WRITE1_REG, ASMT_PSEUDO_DATA);
-	pci_write_config_byte(pdev, ASMT_CONTROL_REG, ASMT_CONTROL_WRITE_BIT);
-}
-EXPORT_SYMBOL_GPL(usb_asmedia_modifyflowcontrol);
-
 void usb_amd_quirk_pll_enable(void)
 {
 	usb_amd_quirk_pll(0);
@@ -631,6 +588,50 @@ bool usb_amd_pt_check_port(struct device *device, int port)
 }
 EXPORT_SYMBOL_GPL(usb_amd_pt_check_port);
 
+static int usb_asmedia_wait_write(struct pci_dev *pdev)
+{
+	unsigned long retry_count;
+	unsigned char value;
+
+	for (retry_count = 1000; retry_count > 0; --retry_count) {
+
+		pci_read_config_byte(pdev, ASMT_CONTROL_REG, &value);
+
+		if (value == 0xff) {
+			dev_err(&pdev->dev, "%s: check_ready ERROR", __func__);
+			return -EIO;
+		}
+
+		if ((value & ASMT_CONTROL_WRITE_BIT) == 0)
+			return 0;
+
+		udelay(50);
+	}
+
+	dev_warn(&pdev->dev, "%s: check_write_ready timeout", __func__);
+	return -ETIMEDOUT;
+}
+
+void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev)
+{
+	if (usb_asmedia_wait_write(pdev) != 0)
+		return;
+
+	/* send command and address to device */
+	pci_write_config_dword(pdev, ASMT_DATA_WRITE0_REG, ASMT_WRITEREG_CMD);
+	pci_write_config_dword(pdev, ASMT_DATA_WRITE1_REG, ASMT_FLOWCTL_ADDR);
+	pci_write_config_byte(pdev, ASMT_CONTROL_REG, ASMT_CONTROL_WRITE_BIT);
+
+	if (usb_asmedia_wait_write(pdev) != 0)
+		return;
+
+	/* send data to device */
+	pci_write_config_dword(pdev, ASMT_DATA_WRITE0_REG, ASMT_FLOWCTL_DATA);
+	pci_write_config_dword(pdev, ASMT_DATA_WRITE1_REG, ASMT_PSEUDO_DATA);
+	pci_write_config_byte(pdev, ASMT_CONTROL_REG, ASMT_CONTROL_WRITE_BIT);
+}
+EXPORT_SYMBOL_GPL(usb_asmedia_modifyflowcontrol);
+
 /*
  * Make sure the controller is completely inactive, unable to
  * generate interrupts or do DMA.
diff --git a/drivers/usb/host/pci-quirks.h b/drivers/usb/host/pci-quirks.h
index e729de21fad7..cde2263a9d2e 100644
--- a/drivers/usb/host/pci-quirks.h
+++ b/drivers/usb/host/pci-quirks.h
@@ -3,8 +3,6 @@
 #define __LINUX_USB_PCI_QUIRKS_H
 
 #ifdef CONFIG_USB_PCI
-void uhci_reset_hc(struct pci_dev *pdev, unsigned long base);
-int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base);
 int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *pdev);
 bool usb_amd_hang_symptom_quirk(void);
 bool usb_amd_prefetch_quirk(void);
@@ -12,23 +10,27 @@ void usb_amd_dev_put(void);
 bool usb_amd_quirk_pll_check(void);
 void usb_amd_quirk_pll_disable(void);
 void usb_amd_quirk_pll_enable(void);
+void sb800_prefetch(struct device *dev, int on);
+bool usb_amd_pt_check_port(struct device *device, int port);
+
+void uhci_reset_hc(struct pci_dev *pdev, unsigned long base);
+int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base);
 void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev);
 void usb_enable_intel_xhci_ports(struct pci_dev *xhci_pdev);
 void usb_disable_xhci_ports(struct pci_dev *xhci_pdev);
-void sb800_prefetch(struct device *dev, int on);
-bool usb_amd_pt_check_port(struct device *device, int port);
 #else
 struct pci_dev;
 static inline void usb_amd_quirk_pll_disable(void) {}
 static inline void usb_amd_quirk_pll_enable(void) {}
-static inline void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev) {}
 static inline void usb_amd_dev_put(void) {}
-static inline void usb_disable_xhci_ports(struct pci_dev *xhci_pdev) {}
 static inline void sb800_prefetch(struct device *dev, int on) {}
 static inline bool usb_amd_pt_check_port(struct device *device, int port)
 {
 	return false;
 }
+
+static inline void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev) {}
+static inline void usb_disable_xhci_ports(struct pci_dev *xhci_pdev) {}
 #endif  /* CONFIG_USB_PCI */
 
 #endif  /*  __LINUX_USB_PCI_QUIRKS_H  */
-- 
2.39.2