[PATCH 1/3] iio: adc: ad7192: Use bitfield access macros

[alisadariana@gmail.com]

From: Alisa-Dariana Roman <alisadariana@gmail.com>

Include bitfield.h and update driver to use bitfield access macros
GENMASK, FIELD_PREP and FIELD_GET.

Also simplify AD7192_CONF_GAIN(-1) to AD7192_CONF_GAIN_MASK and
AD7192_MODE_RATE(-1) to AD7192_MODE_RATE_MASK.

Signed-off-by: Alisa-Dariana Roman <alisa.roman@analog.com>
---
 drivers/iio/adc/ad7192.c | 50 +++++++++++++++++++++++++---------------
 1 file changed, 32 insertions(+), 18 deletions(-)

diff --git a/drivers/iio/adc/ad7192.c b/drivers/iio/adc/ad7192.c
index 69d1103b9508..e83fecb63c1d 100644
--- a/drivers/iio/adc/ad7192.c
+++ b/drivers/iio/adc/ad7192.c
@@ -6,6 +6,7 @@
  */
 
 #include <linux/interrupt.h>
+#include <linux/bitfield.h>
 #include <linux/clk.h>
 #include <linux/device.h>
 #include <linux/kernel.h>
@@ -43,7 +44,9 @@
 #define AD7192_COMM_WEN		BIT(7) /* Write Enable */
 #define AD7192_COMM_WRITE	0 /* Write Operation */
 #define AD7192_COMM_READ	BIT(6) /* Read Operation */
-#define AD7192_COMM_ADDR(x)	(((x) & 0x7) << 3) /* Register Address */
+#define AD7192_COMM_ADDR_MASK	GENMASK(5, 3) /* Register Address Mask */
+#define AD7192_COMM_ADDR(x)	FIELD_PREP(AD7192_COMM_ADDR_MASK, x)
+				  /* Register Address */
 #define AD7192_COMM_CREAD	BIT(2) /* Continuous Read of Data Register */
 
 /* Status Register Bit Designations (AD7192_REG_STAT) */
@@ -56,17 +59,24 @@
 #define AD7192_STAT_CH1		BIT(0) /* Channel 1 */
 
 /* Mode Register Bit Designations (AD7192_REG_MODE) */
-#define AD7192_MODE_SEL(x)	(((x) & 0x7) << 21) /* Operation Mode Select */
-#define AD7192_MODE_SEL_MASK	(0x7 << 21) /* Operation Mode Select Mask */
-#define AD7192_MODE_STA(x)	(((x) & 0x1) << 20) /* Status Register transmission */
+#define AD7192_MODE_SEL_MASK	GENMASK(23, 21) /* Operation Mode Select Mask */
+#define AD7192_MODE_SEL(x)	FIELD_PREP(AD7192_MODE_SEL_MASK, x)
+				  /* Operation Mode Select */
 #define AD7192_MODE_STA_MASK	BIT(20) /* Status Register transmission Mask */
-#define AD7192_MODE_CLKSRC(x)	(((x) & 0x3) << 18) /* Clock Source Select */
+#define AD7192_MODE_STA(x)	FIELD_PREP(AD7192_MODE_STA_MASK, x)
+				  /* Status Register transmission */
+#define AD7192_MODE_CLKSRC_MASK	GENMASK(19, 18) /* Clock Source Select Mask */
+#define AD7192_MODE_CLKSRC(x)	FIELD_PREP(AD7192_MODE_CLKSRC_MASK, x)
+				  /* Clock Source Select */
 #define AD7192_MODE_SINC3	BIT(15) /* SINC3 Filter Select */
 #define AD7192_MODE_ENPAR	BIT(13) /* Parity Enable */
 #define AD7192_MODE_CLKDIV	BIT(12) /* Clock divide by 2 (AD7190/2 only)*/
 #define AD7192_MODE_SCYCLE	BIT(11) /* Single cycle conversion */
 #define AD7192_MODE_REJ60	BIT(10) /* 50/60Hz notch filter */
-#define AD7192_MODE_RATE(x)	((x) & 0x3FF) /* Filter Update Rate Select */
+#define AD7192_MODE_RATE_MASK	GENMASK(9, 0)
+				  /* Filter Update Rate Select Mask */
+#define AD7192_MODE_RATE(x)	FIELD_PREP(AD7192_MODE_RATE_MASK, x)
+				  /* Filter Update Rate Select */
 
 /* Mode Register: AD7192_MODE_SEL options */
 #define AD7192_MODE_CONT		0 /* Continuous Conversion Mode */
@@ -92,13 +102,16 @@
 #define AD7192_CONF_CHOP	BIT(23) /* CHOP enable */
 #define AD7192_CONF_ACX		BIT(22) /* AC excitation enable(AD7195 only) */
 #define AD7192_CONF_REFSEL	BIT(20) /* REFIN1/REFIN2 Reference Select */
-#define AD7192_CONF_CHAN(x)	((x) << 8) /* Channel select */
-#define AD7192_CONF_CHAN_MASK	(0x7FF << 8) /* Channel select mask */
+#define AD7192_CONF_CHAN_MASK	GENMASK(18, 8) /* Channel select mask */
+#define AD7192_CONF_CHAN(x)	FIELD_PREP(AD7192_CONF_CHAN_MASK, x)
+				  /* Channel select */
 #define AD7192_CONF_BURN	BIT(7) /* Burnout current enable */
 #define AD7192_CONF_REFDET	BIT(6) /* Reference detect enable */
 #define AD7192_CONF_BUF		BIT(4) /* Buffered Mode Enable */
 #define AD7192_CONF_UNIPOLAR	BIT(3) /* Unipolar/Bipolar Enable */
-#define AD7192_CONF_GAIN(x)	((x) & 0x7) /* Gain Select */
+#define AD7192_CONF_GAIN_MASK	GENMASK(2, 0) /* Gain Select */
+#define AD7192_CONF_GAIN(x)	FIELD_PREP(AD7192_CONF_GAIN_MASK, x)
+				  /* Gain Select */
 
 #define AD7192_CH_AIN1P_AIN2M	BIT(0) /* AIN1(+) - AIN2(-) */
 #define AD7192_CH_AIN3P_AIN4M	BIT(1) /* AIN3(+) - AIN4(-) */
@@ -130,7 +143,7 @@
 #define CHIPID_AD7192		0x0
 #define CHIPID_AD7193		0x2
 #define CHIPID_AD7195		0x6
-#define AD7192_ID_MASK		0x0F
+#define AD7192_ID_MASK		GENMASK(3, 0)
 
 /* GPOCON Register Bit Designations (AD7192_REG_GPOCON) */
 #define AD7192_GPOCON_BPDSW	BIT(6) /* Bridge power-down switch enable */
@@ -399,7 +412,7 @@ static int ad7192_setup(struct iio_dev *indio_dev, struct device_node *np)
 	if (ret)
 		return ret;
 
-	id &= AD7192_ID_MASK;
+	id = FIELD_GET(AD7192_ID_MASK, id);
 
 	if (id != st->chip_info->chip_id)
 		dev_warn(&st->sd.spi->dev, "device ID query failed (0x%X != 0x%X)\n",
@@ -472,7 +485,7 @@ static ssize_t ad7192_show_ac_excitation(struct device *dev,
 	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ad7192_state *st = iio_priv(indio_dev);
 
-	return sysfs_emit(buf, "%d\n", !!(st->conf & AD7192_CONF_ACX));
+	return sysfs_emit(buf, "%d\n", !!FIELD_GET(AD7192_CONF_ACX, st->conf));
 }
 
 static ssize_t ad7192_show_bridge_switch(struct device *dev,
@@ -482,7 +495,8 @@ static ssize_t ad7192_show_bridge_switch(struct device *dev,
 	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ad7192_state *st = iio_priv(indio_dev);
 
-	return sysfs_emit(buf, "%d\n", !!(st->gpocon & AD7192_GPOCON_BPDSW));
+	return sysfs_emit(buf, "%d\n",
+			  !!FIELD_GET(AD7192_GPOCON_BPDSW, st->gpocon));
 }
 
 static ssize_t ad7192_set(struct device *dev,
@@ -667,9 +681,9 @@ static int ad7192_get_3db_filter_freq(struct ad7192_state *st)
 	fadc = DIV_ROUND_CLOSEST(st->fclk,
 				 st->f_order * AD7192_MODE_RATE(st->mode));
 
-	if (st->conf & AD7192_CONF_CHOP)
+	if (FIELD_GET(AD7192_CONF_CHOP, st->conf))
 		return DIV_ROUND_CLOSEST(fadc * 240, 1024);
-	if (st->mode & AD7192_MODE_SINC3)
+	if (FIELD_GET(AD7192_MODE_SINC3, st->mode))
 		return DIV_ROUND_CLOSEST(fadc * 272, 1024);
 	else
 		return DIV_ROUND_CLOSEST(fadc * 230, 1024);
@@ -682,7 +696,7 @@ static int ad7192_read_raw(struct iio_dev *indio_dev,
 			   long m)
 {
 	struct ad7192_state *st = iio_priv(indio_dev);
-	bool unipolar = !!(st->conf & AD7192_CONF_UNIPOLAR);
+	bool unipolar = !!FIELD_GET(AD7192_CONF_UNIPOLAR, st->conf);
 
 	switch (m) {
 	case IIO_CHAN_INFO_RAW:
@@ -746,7 +760,7 @@ static int ad7192_write_raw(struct iio_dev *indio_dev,
 			if (val2 == st->scale_avail[i][1]) {
 				ret = 0;
 				tmp = st->conf;
-				st->conf &= ~AD7192_CONF_GAIN(-1);
+				st->conf &= ~AD7192_CONF_GAIN_MASK;
 				st->conf |= AD7192_CONF_GAIN(i);
 				if (tmp == st->conf)
 					break;
@@ -769,7 +783,7 @@ static int ad7192_write_raw(struct iio_dev *indio_dev,
 			break;
 		}
 
-		st->mode &= ~AD7192_MODE_RATE(-1);
+		st->mode &= ~AD7192_MODE_RATE_MASK;
 		st->mode |= AD7192_MODE_RATE(div);
 		ad_sd_write_reg(&st->sd, AD7192_REG_MODE, 3, st->mode);
 		break;
-- 
2.34.1