From: David Lechner <dlechner@baylibre.com>
To: linux-iio@vger.kernel.org, devicetree@vger.kernel.org,
linux-staging@lists.linux.dev
Cc: linux-kernel@vger.kernel.org,
"Jonathan Cameron" <jic23@kernel.org>,
"Rob Herring" <robh+dt@kernel.org>,
"Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>,
"Conor Dooley" <conor+dt@kernel.org>,
"Michael Hennerich" <Michael.Hennerich@analog.com>,
"Nuno Sá" <nuno.sa@analog.com>,
"Axel Haslam" <ahaslam@baylibre.com>,
"Philip Molloy" <pmolloy@baylibre.com>,
"David Lechner" <dlechner@baylibre.com>
Subject: [PATCH v2 14/19] staging: iio: resolver: ad2s1210: refactor setting excitation frequency
Date: Thu, 21 Sep 2023 09:43:55 -0500 [thread overview]
Message-ID: <20230921144400.62380-15-dlechner@baylibre.com> (raw)
In-Reply-To: <20230921144400.62380-1-dlechner@baylibre.com>
This combines the ad2s1210_update_frequency_control_word() and
ad2s1210_soft_reset() functions into a single function since they
both have to be called together.
Also clean up a few things while touching this:
- move AD2S1210_DEF_EXCIT macro with similar macros
- remove unnecessary dev_err() calls
Signed-off-by: David Lechner <dlechner@baylibre.com>
---
drivers/staging/iio/resolver/ad2s1210.c | 63 ++++++++++++-------------
1 file changed, 31 insertions(+), 32 deletions(-)
diff --git a/drivers/staging/iio/resolver/ad2s1210.c b/drivers/staging/iio/resolver/ad2s1210.c
index fe413759deb9..f1ffee34ebbc 100644
--- a/drivers/staging/iio/resolver/ad2s1210.c
+++ b/drivers/staging/iio/resolver/ad2s1210.c
@@ -53,12 +53,11 @@
#define AD2S1210_MIN_CLKIN 6144000
#define AD2S1210_MAX_CLKIN 10240000
#define AD2S1210_MIN_EXCIT 2000
+#define AD2S1210_DEF_EXCIT 10000
#define AD2S1210_MAX_EXCIT 20000
#define AD2S1210_MIN_FCW 0x4
#define AD2S1210_MAX_FCW 0x50
-#define AD2S1210_DEF_EXCIT 10000
-
enum ad2s1210_mode {
MOD_POS = 0b00,
MOD_VEL = 0b01,
@@ -184,18 +183,29 @@ static int ad2s1210_regmap_reg_read(void *context, unsigned int reg,
return 0;
}
-static inline
-int ad2s1210_update_frequency_control_word(struct ad2s1210_state *st)
+/*
+ * Sets the excitation frequency and performs software reset.
+ *
+ * Must be called with lock held.
+ */
+static int ad2s1210_set_excitation_frequency(struct ad2s1210_state *st,
+ u16 fexcit)
{
- unsigned char fcw;
+ int ret;
+ u8 fcw;
- fcw = (unsigned char)(st->fexcit * (1 << 15) / st->fclkin);
- if (fcw < AD2S1210_MIN_FCW || fcw > AD2S1210_MAX_FCW) {
- dev_err(&st->sdev->dev, "ad2s1210: FCW out of range\n");
+ fcw = fexcit * (1 << 15) / st->fclkin;
+ if (fcw < AD2S1210_MIN_FCW || fcw > AD2S1210_MAX_FCW)
return -ERANGE;
- }
- return regmap_write(st->regmap, AD2S1210_REG_EXCIT_FREQ, fcw);
+ ret = regmap_write(st->regmap, AD2S1210_REG_EXCIT_FREQ, fcw);
+ if (ret < 0)
+ return ret;
+
+ st->fexcit = fexcit;
+
+ /* software reset reinitializes the excitation frequency output */
+ return regmap_write(st->regmap, AD2S1210_REG_SOFT_RESET, 0);
}
static int ad2s1210_set_resolution_gpios(struct ad2s1210_state *st,
@@ -210,11 +220,6 @@ static int ad2s1210_set_resolution_gpios(struct ad2s1210_state *st,
bitmap);
}
-static inline int ad2s1210_soft_reset(struct ad2s1210_state *st)
-{
- return regmap_write(st->regmap, AD2S1210_REG_SOFT_RESET, 0);
-}
-
static ssize_t ad2s1210_show_fexcit(struct device *dev,
struct device_attribute *attr,
char *buf)
@@ -229,27 +234,24 @@ static ssize_t ad2s1210_store_fexcit(struct device *dev,
const char *buf, size_t len)
{
struct ad2s1210_state *st = iio_priv(dev_to_iio_dev(dev));
- unsigned int fexcit;
+ u16 fexcit;
int ret;
- ret = kstrtouint(buf, 10, &fexcit);
- if (ret < 0)
- return ret;
- if (fexcit < AD2S1210_MIN_EXCIT || fexcit > AD2S1210_MAX_EXCIT) {
- dev_err(dev,
- "ad2s1210: excitation frequency out of range\n");
+ ret = kstrtou16(buf, 10, &fexcit);
+ if (ret < 0 || fexcit < AD2S1210_MIN_EXCIT || fexcit > AD2S1210_MAX_EXCIT)
return -EINVAL;
- }
+
mutex_lock(&st->lock);
- st->fexcit = fexcit;
- ret = ad2s1210_update_frequency_control_word(st);
+ ret = ad2s1210_set_excitation_frequency(st, fexcit);
if (ret < 0)
goto error_ret;
- ret = ad2s1210_soft_reset(st);
+
+ ret = len;
+
error_ret:
mutex_unlock(&st->lock);
- return ret < 0 ? ret : len;
+ return ret;
}
static ssize_t ad2s1210_show_resolution(struct device *dev,
@@ -624,10 +626,8 @@ static int ad2s1210_initial(struct ad2s1210_state *st)
if (ret < 0)
goto error_ret;
- ret = ad2s1210_update_frequency_control_word(st);
- if (ret < 0)
- goto error_ret;
- ret = ad2s1210_soft_reset(st);
+ ret = ad2s1210_set_excitation_frequency(st, AD2S1210_DEF_EXCIT);
+
error_ret:
mutex_unlock(&st->lock);
return ret;
@@ -773,7 +773,6 @@ static int ad2s1210_probe(struct spi_device *spi)
mutex_init(&st->lock);
st->sdev = spi;
st->resolution = 12;
- st->fexcit = AD2S1210_DEF_EXCIT;
ret = ad2s1210_setup_clocks(st);
if (ret < 0)
--
2.34.1
next prev parent reply other threads:[~2023-09-21 16:59 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-09-21 14:43 [PATCH v2 00/19] iio: resolver: move ad2s1210 out of staging David Lechner
2023-09-21 14:43 ` [PATCH v2 01/19] dt-bindings: iio: resolver: add devicetree bindings for ad2s1210 David Lechner
2023-09-22 22:44 ` Rob Herring
2023-09-24 16:57 ` Jonathan Cameron
2023-09-25 15:54 ` David Lechner
2023-09-25 17:47 ` David Lechner
2023-09-21 14:43 ` [PATCH v2 02/19] staging: iio: Documentation: document IIO resolver AD2S1210 sysfs attributes David Lechner
2023-09-24 17:15 ` Jonathan Cameron
2023-09-21 14:43 ` [PATCH v2 03/19] staging: iio: resolver: ad2s1210: fix ad2s1210_show_fault David Lechner
2023-09-24 17:17 ` Jonathan Cameron
2023-09-21 14:43 ` [PATCH v2 04/19] staging: iio: resolver: ad2s1210: fix not restoring sample gpio in channel read David Lechner
2023-09-24 17:19 ` Jonathan Cameron
2023-09-21 14:43 ` [PATCH v2 05/19] staging: iio: resolver: ad2s1210: fix probe David Lechner
2023-09-24 17:25 ` Jonathan Cameron
2023-09-21 14:43 ` [PATCH v2 06/19] staging: iio: resolver: ad2s1210: always use 16-bit value for raw read David Lechner
2023-09-24 17:31 ` Jonathan Cameron
2023-09-21 14:43 ` [PATCH v2 07/19] staging: iio: resolver: ad2s1210: implement IIO_CHAN_INFO_SCALE David Lechner
2023-09-24 17:38 ` Jonathan Cameron
2023-09-21 14:43 ` [PATCH v2 08/19] staging: iio: resolver: ad2s1210: use devicetree to get fclkin David Lechner
2023-09-24 17:43 ` Jonathan Cameron
2023-09-21 14:43 ` [PATCH v2 09/19] staging: iio: resolver: ad2s1210: use regmap for config registers David Lechner
2023-09-24 17:59 ` Jonathan Cameron
2023-09-25 16:37 ` David Lechner
2023-09-21 14:43 ` [PATCH v2 10/19] staging: iio: resolver: ad2s1210: add debugfs reg access David Lechner
2023-09-21 14:43 ` [PATCH v2 11/19] staging: iio: resolver: ad2s1210: remove config attribute David Lechner
2023-09-21 14:43 ` [PATCH v2 12/19] staging: iio: resolver: ad2s1210: rework gpios David Lechner
2023-09-21 14:43 ` [PATCH v2 13/19] staging: iio: resolver: ad2s1210: implement hysteresis as channel attr David Lechner
2023-09-24 18:05 ` Jonathan Cameron
2023-09-21 14:43 ` David Lechner [this message]
2023-09-24 18:08 ` [PATCH v2 14/19] staging: iio: resolver: ad2s1210: refactor setting excitation frequency Jonathan Cameron
2023-09-21 14:43 ` [PATCH v2 15/19] staging: iio: resolver: ad2s1210: read excitation frequency from control register David Lechner
2023-09-21 14:43 ` [PATCH v2 16/19] staging: iio: resolver: ad2s1210: rename fexcit attribute David Lechner
2023-09-21 14:43 ` [PATCH v2 17/19] staging: iio: resolver: ad2s1210: convert resolution to devicetree property David Lechner
2023-09-24 18:10 ` Jonathan Cameron
2023-09-21 14:43 ` [PATCH v2 18/19] staging: iio: resolver: ad2s1210: add phase_lock_range attributes David Lechner
2023-09-24 18:12 ` Jonathan Cameron
2023-09-21 14:44 ` [PATCH v2 19/19] staging: iio: resolver: ad2s1210: add triggered buffer support David Lechner
2023-09-24 18:17 ` Jonathan Cameron
2023-09-25 16:50 ` David Lechner
2023-09-24 16:51 ` [PATCH v2 00/19] iio: resolver: move ad2s1210 out of staging Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230921144400.62380-15-dlechner@baylibre.com \
--to=dlechner@baylibre.com \
--cc=Michael.Hennerich@analog.com \
--cc=ahaslam@baylibre.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jic23@kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-staging@lists.linux.dev \
--cc=nuno.sa@analog.com \
--cc=pmolloy@baylibre.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox