From: Robert Richter <rrichter@amd.com>
To: Alison Schofield <alison.schofield@intel.com>,
Vishal Verma <vishal.l.verma@intel.com>,
Ira Weiny <ira.weiny@intel.com>,
Ben Widawsky <bwidawsk@kernel.org>,
Dan Williams <dan.j.williams@intel.com>,
"Davidlohr Bueso" <dave@stgolabs.net>,
Jonathan Cameron <jonathan.cameron@huawei.com>,
Dave Jiang <dave.jiang@intel.com>
Cc: <linux-cxl@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
Bjorn Helgaas <bhelgaas@google.com>,
Terry Bowman <terry.bowman@amd.com>,
Robert Richter <rrichter@amd.com>,
Jonathan Cameron <Jonathan.Cameron@huawei.com>
Subject: [PATCH v11 16/20] cxl/pci: Disable root port interrupts in RCH mode
Date: Wed, 27 Sep 2023 17:43:35 +0200 [thread overview]
Message-ID: <20230927154339.1600738-17-rrichter@amd.com> (raw)
In-Reply-To: <20230927154339.1600738-1-rrichter@amd.com>
From: Terry Bowman <terry.bowman@amd.com>
The RCH root port contains root command AER registers that should not be
enabled.[1] Disable these to prevent root port interrupts.
[1] CXL 3.0 - 12.2.1.1 RCH Downstream Port-detected Errors
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
---
drivers/cxl/core/pci.c | 32 ++++++++++++++++++++++++++++++++
1 file changed, 32 insertions(+)
diff --git a/drivers/cxl/core/pci.c b/drivers/cxl/core/pci.c
index 8d849c8bf8fb..61e443aff0eb 100644
--- a/drivers/cxl/core/pci.c
+++ b/drivers/cxl/core/pci.c
@@ -763,6 +763,35 @@ static void cxl_dport_map_regs(struct cxl_dport *dport)
cxl_dport_map_rch_aer(dport);
}
+static void cxl_disable_rch_root_ints(struct cxl_dport *dport)
+{
+ void __iomem *aer_base = dport->regs.dport_aer;
+ struct pci_host_bridge *bridge;
+ u32 aer_cmd_mask, aer_cmd;
+
+ if (!aer_base)
+ return;
+
+ bridge = to_pci_host_bridge(dport->dport_dev);
+
+ /*
+ * Disable RCH root port command interrupts.
+ * CXL 3.0 12.2.1.1 - RCH Downstream Port-detected Errors
+ *
+ * This sequence may not be necessary. CXL spec states disabling
+ * the root cmd register's interrupts is required. But, PCI spec
+ * shows these are disabled by default on reset.
+ */
+ if (bridge->native_cxl_error) {
+ aer_cmd_mask = (PCI_ERR_ROOT_CMD_COR_EN |
+ PCI_ERR_ROOT_CMD_NONFATAL_EN |
+ PCI_ERR_ROOT_CMD_FATAL_EN);
+ aer_cmd = readl(aer_base + PCI_ERR_ROOT_COMMAND);
+ aer_cmd &= ~aer_cmd_mask;
+ writel(aer_cmd, aer_base + PCI_ERR_ROOT_COMMAND);
+ }
+}
+
void devm_cxl_setup_parent_dport(struct device *host, struct cxl_dport *dport)
{
struct device *dport_dev = dport->dport_dev;
@@ -774,6 +803,9 @@ void devm_cxl_setup_parent_dport(struct device *host, struct cxl_dport *dport)
dport->reg_map.host = host;
cxl_dport_map_regs(dport);
+
+ if (dport->rch)
+ cxl_disable_rch_root_ints(dport);
}
EXPORT_SYMBOL_NS_GPL(devm_cxl_setup_parent_dport, CXL);
--
2.30.2
next prev parent reply other threads:[~2023-09-27 15:48 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-09-27 15:43 [PATCH v11 00/20] cxl/pci: Add support for RCH RAS error handling Robert Richter
2023-09-27 15:43 ` [PATCH v11 01/20] cxl/port: Fix release of RCD endpoints Robert Richter
2023-10-02 14:14 ` Jonathan Cameron
2023-09-27 15:43 ` [PATCH v11 02/20] cxl/core/regs: Rename @dev to @host in struct cxl_register_map Robert Richter
2023-10-02 14:19 ` Jonathan Cameron
2023-09-27 15:43 ` [PATCH v11 03/20] cxl/port: Fix @host confusion in cxl_dport_setup_regs() Robert Richter
2023-10-02 14:32 ` Jonathan Cameron
2023-09-27 15:43 ` [PATCH v11 04/20] cxl/port: Rename @comp_map to @reg_map in struct cxl_register_map Robert Richter
2023-10-02 14:34 ` Jonathan Cameron
2023-10-09 14:27 ` Terry Bowman
2023-09-27 15:43 ` [PATCH v11 05/20] cxl/port: Pre-initialize component register mappings Robert Richter
2023-09-27 15:43 ` [PATCH v11 06/20] cxl/pci: Store the endpoint's Component Register mappings in struct cxl_dev_state Robert Richter
2023-09-27 15:43 ` [PATCH v11 07/20] cxl/hdm: Use stored Component Register mappings to map HDM decoder capability Robert Richter
2023-10-02 14:43 ` Jonathan Cameron
2023-10-09 14:35 ` Terry Bowman
2023-10-16 14:09 ` Robert Richter
2023-09-27 15:43 ` [PATCH v11 08/20] cxl/pci: Remove Component Register base address from struct cxl_dev_state Robert Richter
2023-09-27 15:43 ` [PATCH v11 09/20] cxl/port: Remove Component Register base address from struct cxl_port Robert Richter
2023-09-27 15:43 ` [PATCH v11 10/20] cxl/pci: Introduce config option PCIEAER_CXL Robert Richter
2023-10-02 14:46 ` Jonathan Cameron
2023-10-09 14:44 ` Terry Bowman
2023-10-16 13:40 ` Terry Bowman
2023-10-16 14:08 ` Jonathan Cameron
2023-09-27 15:43 ` [PATCH v11 11/20] cxl/pci: Add RCH downstream port AER register discovery Robert Richter
2023-10-02 14:53 ` Jonathan Cameron
2023-10-09 14:55 ` Terry Bowman
2023-09-27 15:43 ` [PATCH v11 12/20] PCI/AER: Refactor cper_print_aer() for use by CXL driver module Robert Richter
2023-09-27 15:43 ` [PATCH v11 13/20] cxl/pci: Update CXL error logging to use RAS register address Robert Richter
2023-09-27 15:43 ` [PATCH v11 14/20] cxl/pci: Map RCH downstream AER registers for logging protocol errors Robert Richter
2023-10-02 14:56 ` Jonathan Cameron
2023-10-09 14:56 ` Terry Bowman
2023-09-27 15:43 ` [PATCH v11 15/20] cxl/pci: Add RCH downstream port error logging Robert Richter
2023-09-27 15:43 ` Robert Richter [this message]
2023-09-27 15:43 ` [PATCH v11 17/20] PCI/AER: Forward RCH downstream port-detected errors to the CXL.mem dev handler Robert Richter
2023-09-27 15:43 ` [PATCH v11 18/20] PCI/AER: Unmask RCEC internal errors to enable RCH downstream port error handling Robert Richter
2023-09-27 15:43 ` [PATCH v11 19/20] cxl/core/regs: Rename phys_addr in cxl_map_component_regs() Robert Richter
2023-09-27 15:43 ` [PATCH v11 20/20] cxl/core/regs: Rework cxl_map_pmu_regs() to use map->dev for devm Robert Richter
2023-10-02 15:01 ` Jonathan Cameron
2023-09-27 16:04 ` [PATCH v11 00/20] cxl/pci: Add support for RCH RAS error handling Robert Richter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230927154339.1600738-17-rrichter@amd.com \
--to=rrichter@amd.com \
--cc=alison.schofield@intel.com \
--cc=bhelgaas@google.com \
--cc=bwidawsk@kernel.org \
--cc=dan.j.williams@intel.com \
--cc=dave.jiang@intel.com \
--cc=dave@stgolabs.net \
--cc=ira.weiny@intel.com \
--cc=jonathan.cameron@huawei.com \
--cc=linux-cxl@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=terry.bowman@amd.com \
--cc=vishal.l.verma@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox