From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
linux-serial@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Al Cooper <alcooperx@gmail.com>,
Broadcom internal kernel review list
<bcm-kernel-feedback-list@broadcom.com>,
Jiri Slaby <jirislaby@kernel.org>,
Andi Shyti <andi.shyti@linux.intel.com>,
Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Subject: [PATCH v2 1/1] serial: 8250_bcm7271: Use devm_clk_get_optional_enabled()
Date: Thu, 5 Oct 2023 15:45:50 +0300 [thread overview]
Message-ID: <20231005124550.3607234-1-andriy.shevchenko@linux.intel.com> (raw)
Use devm_clk_get_optional_enabled() to simplify the code.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
v2: fixed the returned value (Andi)
drivers/tty/serial/8250/8250_bcm7271.c | 24 +++++++++---------------
1 file changed, 9 insertions(+), 15 deletions(-)
diff --git a/drivers/tty/serial/8250/8250_bcm7271.c b/drivers/tty/serial/8250/8250_bcm7271.c
index 1a853a08654a..55dea2539c47 100644
--- a/drivers/tty/serial/8250/8250_bcm7271.c
+++ b/drivers/tty/serial/8250/8250_bcm7271.c
@@ -1015,26 +1015,23 @@ static int brcmuart_probe(struct platform_device *pdev)
of_property_read_u32(np, "clock-frequency", &clk_rate);
/* See if a Baud clock has been specified */
- baud_mux_clk = devm_clk_get(dev, "sw_baud");
- if (IS_ERR(baud_mux_clk)) {
- if (PTR_ERR(baud_mux_clk) == -EPROBE_DEFER) {
- ret = -EPROBE_DEFER;
- goto release_dma;
- }
- dev_dbg(dev, "BAUD MUX clock not specified\n");
- } else {
+ baud_mux_clk = devm_clk_get_optional_enabled(dev, "sw_baud");
+ ret = PTR_ERR_OR_ZERO(baud_mux_clk);
+ if (ret)
+ goto release_dma;
+ if (baud_mux_clk) {
dev_dbg(dev, "BAUD MUX clock found\n");
- ret = clk_prepare_enable(baud_mux_clk);
- if (ret)
- goto release_dma;
+
priv->baud_mux_clk = baud_mux_clk;
init_real_clk_rates(dev, priv);
clk_rate = priv->default_mux_rate;
+ } else {
+ dev_dbg(dev, "BAUD MUX clock not specified\n");
}
if (clk_rate == 0) {
ret = dev_err_probe(dev, -EINVAL, "clock-frequency or clk not defined\n");
- goto err_clk_disable;
+ goto release_dma;
}
dev_dbg(dev, "DMA is %senabled\n", priv->dma_enabled ? "" : "not ");
@@ -1118,8 +1115,6 @@ static int brcmuart_probe(struct platform_device *pdev)
serial8250_unregister_port(priv->line);
err:
brcmuart_free_bufs(dev, priv);
-err_clk_disable:
- clk_disable_unprepare(baud_mux_clk);
release_dma:
if (priv->dma_enabled)
brcmuart_arbitration(priv, 0);
@@ -1134,7 +1129,6 @@ static int brcmuart_remove(struct platform_device *pdev)
hrtimer_cancel(&priv->hrt);
serial8250_unregister_port(priv->line);
brcmuart_free_bufs(&pdev->dev, priv);
- clk_disable_unprepare(priv->baud_mux_clk);
if (priv->dma_enabled)
brcmuart_arbitration(priv, 0);
return 0;
--
2.40.0.1.gaa8946217a0b
next reply other threads:[~2023-10-05 14:33 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-05 12:45 Andy Shevchenko [this message]
2023-10-05 15:19 ` [PATCH v2 1/1] serial: 8250_bcm7271: Use devm_clk_get_optional_enabled() Andi Shyti
2023-10-05 15:37 ` Andy Shevchenko
2023-10-05 16:07 ` Andi Shyti
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231005124550.3607234-1-andriy.shevchenko@linux.intel.com \
--to=andriy.shevchenko@linux.intel.com \
--cc=alcooperx@gmail.com \
--cc=andi.shyti@linux.intel.com \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=gregkh@linuxfoundation.org \
--cc=jirislaby@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox