From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
To: alsa-devel@alsa-project.org
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>,
Cezary Rojewski <cezary.rojewski@intel.com>,
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>,
Liam Girdwood <liam.r.girdwood@linux.intel.com>,
Peter Ujfalusi <peter.ujfalusi@linux.intel.com>,
Bard Liao <yung-chuan.liao@linux.intel.com>,
Ranjani Sridharan <ranjani.sridharan@linux.intel.com>,
Kai Vehmanen <kai.vehmanen@linux.intel.com>,
Mark Brown <broonie@kernel.org>,
Daniel Baluta <daniel.baluta@nxp.com>,
linux-kernel@vger.kernel.org,
sound-open-firmware@alsa-project.org
Subject: [PATCH v7 12/13] ASoC: SOF: Intel: Move binding to display driver outside of deferred probe
Date: Mon, 9 Oct 2023 13:54:36 +0200 [thread overview]
Message-ID: <20231009115437.99976-13-maarten.lankhorst@linux.intel.com> (raw)
In-Reply-To: <20231009115437.99976-1-maarten.lankhorst@linux.intel.com>
Now that we can use -EPROBE_DEFER, it's no longer required to spin off
the snd_hdac_i915_init into a workqueue.
Use the -EPROBE_DEFER mechanism instead, which must be returned in the
probe function.
The previously added probe_early can be used for this,
and we also use the newly added remove_late for unbinding afterwards.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
---
sound/soc/sof/intel/hda-common-ops.c | 1 +
sound/soc/sof/intel/hda.c | 18 ++++++------------
sound/soc/sof/intel/hda.h | 1 +
3 files changed, 8 insertions(+), 12 deletions(-)
diff --git a/sound/soc/sof/intel/hda-common-ops.c b/sound/soc/sof/intel/hda-common-ops.c
index 1cc18fb2b75bb..26105d8f1bdc7 100644
--- a/sound/soc/sof/intel/hda-common-ops.c
+++ b/sound/soc/sof/intel/hda-common-ops.c
@@ -19,6 +19,7 @@ struct snd_sof_dsp_ops sof_hda_common_ops = {
.probe_early = hda_dsp_probe_early,
.probe = hda_dsp_probe,
.remove = hda_dsp_remove,
+ .remove_late = hda_dsp_remove_late,
/* Register IO uses direct mmio */
diff --git a/sound/soc/sof/intel/hda.c b/sound/soc/sof/intel/hda.c
index 2f189473323f3..d4e76c58de13a 100644
--- a/sound/soc/sof/intel/hda.c
+++ b/sound/soc/sof/intel/hda.c
@@ -1168,6 +1168,7 @@ int hda_dsp_probe_early(struct snd_sof_dev *sdev)
return -ENOMEM;
sdev->pdata->hw_pdata = hdev;
hdev->desc = chip;
+ ret = hda_init(sdev);
err:
return ret;
@@ -1177,7 +1178,6 @@ int hda_dsp_probe(struct snd_sof_dev *sdev)
{
struct pci_dev *pci = to_pci_dev(sdev->dev);
struct sof_intel_hda_dev *hdev = sdev->pdata->hw_pdata;
- struct hdac_bus *bus;
int ret = 0;
hdev->dmic_dev = platform_device_register_data(sdev->dev, "dmic-codec",
@@ -1201,12 +1201,6 @@ int hda_dsp_probe(struct snd_sof_dev *sdev)
if (sdev->dspless_mode_selected)
hdev->no_ipc_position = 1;
- /* set up HDA base */
- bus = sof_to_bus(sdev);
- ret = hda_init(sdev);
- if (ret < 0)
- goto hdac_bus_unmap;
-
if (sdev->dspless_mode_selected)
goto skip_dsp_setup;
@@ -1315,8 +1309,6 @@ int hda_dsp_probe(struct snd_sof_dev *sdev)
iounmap(sdev->bar[HDA_DSP_BAR]);
hdac_bus_unmap:
platform_device_unregister(hdev->dmic_dev);
- iounmap(bus->remap_addr);
- hda_codec_i915_exit(sdev);
return ret;
}
@@ -1325,7 +1317,6 @@ int hda_dsp_remove(struct snd_sof_dev *sdev)
{
struct sof_intel_hda_dev *hda = sdev->pdata->hw_pdata;
const struct sof_intel_dsp_desc *chip = hda->desc;
- struct hdac_bus *bus = sof_to_bus(sdev);
struct pci_dev *pci = to_pci_dev(sdev->dev);
struct nhlt_acpi_table *nhlt = hda->nhlt;
@@ -1376,10 +1367,13 @@ int hda_dsp_remove(struct snd_sof_dev *sdev)
if (!sdev->dspless_mode_selected)
iounmap(sdev->bar[HDA_DSP_BAR]);
- iounmap(bus->remap_addr);
+ return 0;
+}
+int hda_dsp_remove_late(struct snd_sof_dev *sdev)
+{
+ iounmap(sof_to_bus(sdev)->remap_addr);
sof_hda_bus_exit(sdev);
-
hda_codec_i915_exit(sdev);
return 0;
diff --git a/sound/soc/sof/intel/hda.h b/sound/soc/sof/intel/hda.h
index e13cdc933ca6b..8e846684279e7 100644
--- a/sound/soc/sof/intel/hda.h
+++ b/sound/soc/sof/intel/hda.h
@@ -576,6 +576,7 @@ struct sof_intel_hda_stream {
int hda_dsp_probe_early(struct snd_sof_dev *sdev);
int hda_dsp_probe(struct snd_sof_dev *sdev);
int hda_dsp_remove(struct snd_sof_dev *sdev);
+int hda_dsp_remove_late(struct snd_sof_dev *sdev);
int hda_dsp_core_power_up(struct snd_sof_dev *sdev, unsigned int core_mask);
int hda_dsp_core_run(struct snd_sof_dev *sdev, unsigned int core_mask);
int hda_dsp_enable_core(struct snd_sof_dev *sdev, unsigned int core_mask);
--
2.39.2
next prev parent reply other threads:[~2023-10-09 11:55 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-09 11:54 [PATCH v7 00/13] sound: Use -EPROBE_DEFER instead of i915 module loading Maarten Lankhorst
2023-10-09 11:54 ` [PATCH v7 01/13] ASoC: SOF: core: Ensure sof_ops_free() is still called when probe never ran Maarten Lankhorst
2023-10-13 9:15 ` Takashi Iwai
2023-10-19 10:02 ` Maarten Lankhorst
2023-10-19 13:09 ` Takashi Iwai
2023-10-09 11:54 ` [PATCH v7 02/13] ASoC: SOF: core: Add probe_early and remove_late callbacks Maarten Lankhorst
2023-10-09 11:54 ` [PATCH v7 03/13] ASoC: SOF: Intel: hda: start splitting the probe Maarten Lankhorst
2023-10-09 11:54 ` [PATCH v7 04/13] ASoC: SOF: Intel: Fix error handling in hda_init() Maarten Lankhorst
2023-10-09 11:54 ` [PATCH v7 05/13] ALSA: hda: Intel: Fix error handling in azx_probe() Maarten Lankhorst
2023-10-09 11:54 ` [PATCH v7 06/13] ALSA: hda: i915: Allow override of gpu binding Maarten Lankhorst
2023-10-09 11:54 ` [PATCH v7 07/13] ALSA: hda: i915: Add an allow_modprobe argument to snd_hdac_i915_init Maarten Lankhorst
2023-10-09 11:54 ` [PATCH v7 08/13] ALSA: hda: i915: Allow xe as match for i915_component_master_match Maarten Lankhorst
2023-10-09 11:54 ` [PATCH v7 09/13] ASoC: Intel: avs: Move snd_hdac_i915_init to before probe_work Maarten Lankhorst
2023-10-09 11:54 ` [PATCH v7 10/13] ALSA: hda: Intel: " Maarten Lankhorst
2023-10-09 11:54 ` [PATCH v7 11/13] ASoC: Intel: Skylake: " Maarten Lankhorst
2023-10-09 11:54 ` Maarten Lankhorst [this message]
2023-10-09 11:54 ` [PATCH v7 13/13] ALSA: hda: i915: Remove extra argument from snd_hdac_i915_init Maarten Lankhorst
2023-10-10 10:49 ` [PATCH v7 00/13] sound: Use -EPROBE_DEFER instead of i915 module loading Péter Ujfalusi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231009115437.99976-13-maarten.lankhorst@linux.intel.com \
--to=maarten.lankhorst@linux.intel.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=cezary.rojewski@intel.com \
--cc=daniel.baluta@nxp.com \
--cc=kai.vehmanen@linux.intel.com \
--cc=liam.r.girdwood@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=perex@perex.cz \
--cc=peter.ujfalusi@linux.intel.com \
--cc=pierre-louis.bossart@linux.intel.com \
--cc=ranjani.sridharan@linux.intel.com \
--cc=sound-open-firmware@alsa-project.org \
--cc=tiwai@suse.com \
--cc=yung-chuan.liao@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox