public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Bjorn Helgaas <helgaas@kernel.org>
To: linux-pci@vger.kernel.org
Cc: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>,
	"Jonathan Cameron" <Jonathan.Cameron@huawei.com>,
	"Krzysztof Wilczyński" <kw@linux.com>,
	"Lorenzo Pieralisi" <lpieralisi@kernel.org>,
	linux-kernel@vger.kernel.org,
	"Bjorn Helgaas" <bhelgaas@google.com>
Subject: [PATCH 03/10] PCI/ASPM: Use FIELD_GET()
Date: Tue, 10 Oct 2023 15:44:29 -0500	[thread overview]
Message-ID: <20231010204436.1000644-4-helgaas@kernel.org> (raw)
In-Reply-To: <20231010204436.1000644-1-helgaas@kernel.org>

From: Bjorn Helgaas <bhelgaas@google.com>

Add #defines for T_POWER_ON in the L1 PM Substates Capability and use
FIELD_PREP() and FIELD_GET() when possible.  These remove the need for
explicit shifts.  No functional change intended.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
---
 drivers/pci/pcie/aspm.c       | 31 ++++++++++++++++++-------------
 include/uapi/linux/pci_regs.h |  2 ++
 2 files changed, 20 insertions(+), 13 deletions(-)

diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c
index 1bf630059264..06f175d8dee5 100644
--- a/drivers/pci/pcie/aspm.c
+++ b/drivers/pci/pcie/aspm.c
@@ -7,6 +7,7 @@
  * Copyright (C) Shaohua Li (shaohua.li@intel.com)
  */
 
+#include <linux/bitfield.h>
 #include <linux/kernel.h>
 #include <linux/math.h>
 #include <linux/module.h>
@@ -267,7 +268,7 @@ static void pcie_aspm_configure_common_clock(struct pcie_link_state *link)
 /* Convert L0s latency encoding to ns */
 static u32 calc_l0s_latency(u32 lnkcap)
 {
-	u32 encoding = (lnkcap & PCI_EXP_LNKCAP_L0SEL) >> 12;
+	u32 encoding = FIELD_GET(PCI_EXP_LNKCAP_L0SEL, lnkcap);
 
 	if (encoding == 0x7)
 		return (5 * 1000);	/* > 4us */
@@ -285,7 +286,7 @@ static u32 calc_l0s_acceptable(u32 encoding)
 /* Convert L1 latency encoding to ns */
 static u32 calc_l1_latency(u32 lnkcap)
 {
-	u32 encoding = (lnkcap & PCI_EXP_LNKCAP_L1EL) >> 15;
+	u32 encoding = FIELD_GET(PCI_EXP_LNKCAP_L1EL, lnkcap);
 
 	if (encoding == 0x7)
 		return (65 * 1000);	/* > 64us */
@@ -371,11 +372,11 @@ static void pcie_aspm_check_latency(struct pci_dev *endpoint)
 	link = endpoint->bus->self->link_state;
 
 	/* Calculate endpoint L0s acceptable latency */
-	encoding = (endpoint->devcap & PCI_EXP_DEVCAP_L0S) >> 6;
+	encoding = FIELD_GET(PCI_EXP_DEVCAP_L0S, endpoint->devcap);
 	acceptable_l0s = calc_l0s_acceptable(encoding);
 
 	/* Calculate endpoint L1 acceptable latency */
-	encoding = (endpoint->devcap & PCI_EXP_DEVCAP_L1) >> 9;
+	encoding = FIELD_GET(PCI_EXP_DEVCAP_L1, endpoint->devcap);
 	acceptable_l1 = calc_l1_acceptable(encoding);
 
 	while (link) {
@@ -446,22 +447,24 @@ static void aspm_calc_l12_info(struct pcie_link_state *link,
 	u32 pl1_2_enables, cl1_2_enables;
 
 	/* Choose the greater of the two Port Common_Mode_Restore_Times */
-	val1 = (parent_l1ss_cap & PCI_L1SS_CAP_CM_RESTORE_TIME) >> 8;
-	val2 = (child_l1ss_cap & PCI_L1SS_CAP_CM_RESTORE_TIME) >> 8;
+	val1 = FIELD_GET(PCI_L1SS_CAP_CM_RESTORE_TIME, parent_l1ss_cap);
+	val2 = FIELD_GET(PCI_L1SS_CAP_CM_RESTORE_TIME, child_l1ss_cap);
 	t_common_mode = max(val1, val2);
 
 	/* Choose the greater of the two Port T_POWER_ON times */
-	val1   = (parent_l1ss_cap & PCI_L1SS_CAP_P_PWR_ON_VALUE) >> 19;
-	scale1 = (parent_l1ss_cap & PCI_L1SS_CAP_P_PWR_ON_SCALE) >> 16;
-	val2   = (child_l1ss_cap & PCI_L1SS_CAP_P_PWR_ON_VALUE) >> 19;
-	scale2 = (child_l1ss_cap & PCI_L1SS_CAP_P_PWR_ON_SCALE) >> 16;
+	val1   = FIELD_GET(PCI_L1SS_CAP_P_PWR_ON_VALUE, parent_l1ss_cap);
+	scale1 = FIELD_GET(PCI_L1SS_CAP_P_PWR_ON_SCALE, parent_l1ss_cap);
+	val2   = FIELD_GET(PCI_L1SS_CAP_P_PWR_ON_VALUE, child_l1ss_cap);
+	scale2 = FIELD_GET(PCI_L1SS_CAP_P_PWR_ON_SCALE, child_l1ss_cap);
 
 	if (calc_l12_pwron(parent, scale1, val1) >
 	    calc_l12_pwron(child, scale2, val2)) {
-		ctl2 |= scale1 | (val1 << 3);
+		ctl2 |= FIELD_PREP(PCI_L1SS_CTL2_T_PWR_ON_SCALE, scale1) |
+			FIELD_PREP(PCI_L1SS_CTL2_T_PWR_ON_VALUE, val1);
 		t_power_on = calc_l12_pwron(parent, scale1, val1);
 	} else {
-		ctl2 |= scale2 | (val2 << 3);
+		ctl2 |= FIELD_PREP(PCI_L1SS_CTL2_T_PWR_ON_SCALE, scale2) |
+			FIELD_PREP(PCI_L1SS_CTL2_T_PWR_ON_VALUE, val2);
 		t_power_on = calc_l12_pwron(child, scale2, val2);
 	}
 
@@ -477,7 +480,9 @@ static void aspm_calc_l12_info(struct pcie_link_state *link,
 	 */
 	l1_2_threshold = 2 + 4 + t_common_mode + t_power_on;
 	encode_l12_threshold(l1_2_threshold, &scale, &value);
-	ctl1 |= t_common_mode << 8 | scale << 29 | value << 16;
+	ctl1 |= FIELD_PREP(PCI_L1SS_CTL1_CM_RESTORE_TIME, t_common_mode) |
+		FIELD_PREP(PCI_L1SS_CTL1_LTR_L12_TH_VALUE, value) |
+		FIELD_PREP(PCI_L1SS_CTL1_LTR_L12_TH_SCALE, scale);
 
 	/* Some broken devices only support dword access to L1 SS */
 	pci_read_config_dword(parent, parent->l1ss + PCI_L1SS_CTL1, &pctl1);
diff --git a/include/uapi/linux/pci_regs.h b/include/uapi/linux/pci_regs.h
index e5f558d96493..34bf037993f3 100644
--- a/include/uapi/linux/pci_regs.h
+++ b/include/uapi/linux/pci_regs.h
@@ -1088,6 +1088,8 @@
 #define  PCI_L1SS_CTL1_LTR_L12_TH_VALUE	0x03ff0000  /* LTR_L1.2_THRESHOLD_Value */
 #define  PCI_L1SS_CTL1_LTR_L12_TH_SCALE	0xe0000000  /* LTR_L1.2_THRESHOLD_Scale */
 #define PCI_L1SS_CTL2		0x0c	/* Control 2 Register */
+#define  PCI_L1SS_CTL2_T_PWR_ON_SCALE   0x00000003  /* T_POWER_ON Scale */
+#define  PCI_L1SS_CTL2_T_PWR_ON_VALUE   0x000000f8  /* T_POWER_ON Value */
 
 /* Designated Vendor-Specific (DVSEC, PCI_EXT_CAP_ID_DVSEC) */
 #define PCI_DVSEC_HEADER1		0x4 /* Designated Vendor-Specific Header1 */
-- 
2.34.1


  parent reply	other threads:[~2023-10-10 20:44 UTC|newest]

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-10-10 20:44 [PATCH 00/10] PCI: Use FIELD_GET() and FIELD_PREP() Bjorn Helgaas
2023-10-10 20:44 ` [PATCH 01/10] PCI: Use FIELD_GET() Bjorn Helgaas
2023-10-11 10:50   ` Jonathan Cameron
2023-10-11 11:24   ` Ilpo Järvinen
2023-10-10 20:44 ` [PATCH 02/10] PCI: Use FIELD_GET() in Sapphire RX 5600 XT Pulse quirk Bjorn Helgaas
2023-10-11 10:59   ` Jonathan Cameron
2023-10-11 11:31   ` Ilpo Järvinen
2023-10-10 20:44 ` Bjorn Helgaas [this message]
2023-10-10 21:07   ` [PATCH 03/10] PCI/ASPM: Use FIELD_GET() Bjorn Helgaas
2023-10-10 20:44 ` [PATCH 04/10] PCI/ATS: Show PASID Capability register width in bitmasks Bjorn Helgaas
2023-10-11 11:00   ` Jonathan Cameron
2023-10-11 11:31   ` Ilpo Järvinen
2023-10-10 20:44 ` [PATCH 05/10] PCI/ATS: Use FIELD_GET() Bjorn Helgaas
2023-10-11 11:02   ` Jonathan Cameron
2023-10-11 11:20   ` Ilpo Järvinen
2023-10-10 20:44 ` [PATCH 06/10] PCI/DPC: " Bjorn Helgaas
2023-10-11 11:01   ` Ilpo Järvinen
2023-10-13 11:23     ` Ilpo Järvinen
2023-10-13 20:02     ` Bjorn Helgaas
2023-10-16 12:55       ` Ilpo Järvinen
2023-10-16 15:10         ` Ilpo Järvinen
2023-10-16 15:14           ` Ilpo Järvinen
2023-10-11 11:07   ` Jonathan Cameron
2023-10-11 11:13     ` Ilpo Järvinen
2023-10-10 20:44 ` [PATCH 07/10] PCI/PME: " Bjorn Helgaas
2023-10-11 11:10   ` Jonathan Cameron
2023-10-11 11:38   ` Ilpo Järvinen
2023-10-10 20:44 ` [PATCH 08/10] PCI/PTM: " Bjorn Helgaas
2023-10-11 11:11   ` Jonathan Cameron
2023-10-11 11:15   ` Ilpo Järvinen
2023-10-10 20:44 ` [PATCH 09/10] PCI/VC: " Bjorn Helgaas
2023-10-11 11:13   ` Jonathan Cameron
2023-10-11 11:39   ` Ilpo Järvinen
2023-10-10 20:44 ` [PATCH 10/10] PCI/portdrv: " Bjorn Helgaas
2023-10-11 11:14   ` Jonathan Cameron
2023-10-11 11:40   ` Ilpo Järvinen
2023-10-11 14:50 ` [PATCH 00/10] PCI: Use FIELD_GET() and FIELD_PREP() Kuppuswamy Sathyanarayanan
2023-10-18 21:00 ` Bjorn Helgaas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20231010204436.1000644-4-helgaas@kernel.org \
    --to=helgaas@kernel.org \
    --cc=Jonathan.Cameron@huawei.com \
    --cc=bhelgaas@google.com \
    --cc=ilpo.jarvinen@linux.intel.com \
    --cc=kw@linux.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lpieralisi@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox