From: Tanmay Shah <tanmay.shah@amd.com>
To: <andersson@kernel.org>, <mathieu.poirier@linaro.org>,
<robh+dt@kernel.org>, <krzysztof.kozlowski+dt@linaro.org>,
<conor+dt@kernel.org>, <michal.simek@amd.com>,
<ben.levinsky@amd.com>, <tanmay.shah@amd.com>
Cc: <linux-remoteproc@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>,
Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>,
Rob Herring <robh@kernel.org>
Subject: [PATCH v6 1/4] dt-bindings: remoteproc: add Tightly Coupled Memory (TCM) bindings
Date: Thu, 12 Oct 2023 21:22:26 -0700 [thread overview]
Message-ID: <20231013042229.3954527-2-tanmay.shah@amd.com> (raw)
In-Reply-To: <20231013042229.3954527-1-tanmay.shah@amd.com>
From: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Introduce bindings for TCM memory address space on AMD-xilinx Zynq
UltraScale+ platform. It will help in defining TCM in device-tree
and make it's access platform agnostic and data-driven.
Tightly-coupled memories(TCMs) are low-latency memory that provides
predictable instruction execution and predictable data load/store
timing. Each Cortex-R5F processor contains two 64-bit wide 64 KB memory
banks on the ATCM and BTCM ports, for a total of 128 KB of memory.
The TCM resources(reg, reg-names and power-domain) are documented for
each TCM in the R5 node. The reg and reg-names are made as required
properties as we don't want to hardcode TCM addresses for future
platforms and for zu+ legacy implementation will ensure that the
old dts w/o reg/reg-names works and stable ABI is maintained.
It also extends the examples for TCM split and lockstep modes.
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Signed-off-by: Tanmay Shah <tanmay.shah@amd.com>
Acked-by: Rob Herring <robh@kernel.org>
---
.../remoteproc/xlnx,zynqmp-r5fss.yaml | 131 +++++++++++++++---
1 file changed, 113 insertions(+), 18 deletions(-)
diff --git a/Documentation/devicetree/bindings/remoteproc/xlnx,zynqmp-r5fss.yaml b/Documentation/devicetree/bindings/remoteproc/xlnx,zynqmp-r5fss.yaml
index 78aac69f1060..9ecd63ea1b38 100644
--- a/Documentation/devicetree/bindings/remoteproc/xlnx,zynqmp-r5fss.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/xlnx,zynqmp-r5fss.yaml
@@ -20,6 +20,17 @@ properties:
compatible:
const: xlnx,zynqmp-r5fss
+ "#address-cells":
+ const: 2
+
+ "#size-cells":
+ const: 2
+
+ ranges:
+ description: |
+ Standard ranges definition providing address translations for
+ local R5F TCM address spaces to bus addresses.
+
xlnx,cluster-mode:
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1, 2]
@@ -37,7 +48,7 @@ properties:
2: single cpu mode
patternProperties:
- "^r5f-[a-f0-9]+$":
+ "^r5f@[0-9a-f]+$":
type: object
description: |
The RPU is located in the Low Power Domain of the Processor Subsystem.
@@ -54,8 +65,19 @@ patternProperties:
compatible:
const: xlnx,zynqmp-r5f
+ reg:
+ items:
+ - description: ATCM internal memory region
+ - description: BTCM internal memory region
+
+ reg-names:
+ items:
+ - const: atcm
+ - const: btcm
+
power-domains:
- maxItems: 1
+ minItems: 1
+ maxItems: 3
mboxes:
minItems: 1
@@ -102,34 +124,107 @@ patternProperties:
required:
- compatible
- power-domains
+ - reg
+ - reg-names
unevaluatedProperties: false
required:
- compatible
+ - "#address-cells"
+ - "#size-cells"
+ - ranges
additionalProperties: false
examples:
- |
- remoteproc {
- compatible = "xlnx,zynqmp-r5fss";
- xlnx,cluster-mode = <1>;
-
- r5f-0 {
- compatible = "xlnx,zynqmp-r5f";
- power-domains = <&zynqmp_firmware 0x7>;
- memory-region = <&rproc_0_fw_image>, <&rpu0vdev0buffer>, <&rpu0vdev0vring0>, <&rpu0vdev0vring1>;
- mboxes = <&ipi_mailbox_rpu0 0>, <&ipi_mailbox_rpu0 1>;
- mbox-names = "tx", "rx";
+ #include <dt-bindings/power/xlnx-zynqmp-power.h>
+
+ //Split mode configuration
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ remoteproc@ffe00000 {
+ compatible = "xlnx,zynqmp-r5fss";
+ xlnx,cluster-mode = <0>;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0xffe00000 0x0 0x10000>,
+ <0x0 0x20000 0x0 0xffe20000 0x0 0x10000>,
+ <0x1 0x0 0x0 0xffe90000 0x0 0x10000>,
+ <0x1 0x20000 0x0 0xffeb0000 0x0 0x10000>;
+
+ r5f@0 {
+ compatible = "xlnx,zynqmp-r5f";
+ reg = <0x0 0x0 0x0 0x10000>, <0x0 0x20000 0x0 0x10000>;
+ reg-names = "atcm", "btcm";
+ power-domains = <&zynqmp_firmware PD_RPU_0>,
+ <&zynqmp_firmware PD_R5_0_ATCM>,
+ <&zynqmp_firmware PD_R5_0_BTCM>;
+ memory-region = <&rproc_0_fw_image>, <&rpu0vdev0buffer>,
+ <&rpu0vdev0vring0>, <&rpu0vdev0vring1>;
+ mboxes = <&ipi_mailbox_rpu0 0>, <&ipi_mailbox_rpu0 1>;
+ mbox-names = "tx", "rx";
+ };
+
+ r5f@1 {
+ compatible = "xlnx,zynqmp-r5f";
+ reg = <0x1 0x0 0x0 0x10000>, <0x1 0x20000 0x0 0x10000>;
+ reg-names = "atcm", "btcm";
+ power-domains = <&zynqmp_firmware PD_RPU_1>,
+ <&zynqmp_firmware PD_R5_1_ATCM>,
+ <&zynqmp_firmware PD_R5_1_BTCM>;
+ memory-region = <&rproc_1_fw_image>, <&rpu1vdev0buffer>,
+ <&rpu1vdev0vring0>, <&rpu1vdev0vring1>;
+ mboxes = <&ipi_mailbox_rpu1 0>, <&ipi_mailbox_rpu1 1>;
+ mbox-names = "tx", "rx";
+ };
};
+ };
- r5f-1 {
- compatible = "xlnx,zynqmp-r5f";
- power-domains = <&zynqmp_firmware 0x8>;
- memory-region = <&rproc_1_fw_image>, <&rpu1vdev0buffer>, <&rpu1vdev0vring0>, <&rpu1vdev0vring1>;
- mboxes = <&ipi_mailbox_rpu1 0>, <&ipi_mailbox_rpu1 1>;
- mbox-names = "tx", "rx";
+ - |
+ //Lockstep configuration
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ remoteproc@ffe00000 {
+ compatible = "xlnx,zynqmp-r5fss";
+ xlnx,cluster-mode = <1>;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0xffe00000 0x0 0x20000>,
+ <0x0 0x20000 0x0 0xffe20000 0x0 0x20000>;
+
+ r5f@0 {
+ compatible = "xlnx,zynqmp-r5f";
+ reg = <0x0 0x0 0x0 0x20000>, <0x0 0x20000 0x0 0x20000>;
+ reg-names = "atcm", "btcm";
+ power-domains = <&zynqmp_firmware PD_RPU_0>,
+ <&zynqmp_firmware PD_R5_0_ATCM>,
+ <&zynqmp_firmware PD_R5_0_BTCM>;
+ memory-region = <&rproc_0_fw_image>, <&rpu0vdev0buffer>,
+ <&rpu0vdev0vring0>, <&rpu0vdev0vring1>;
+ mboxes = <&ipi_mailbox_rpu0 0>, <&ipi_mailbox_rpu0 1>;
+ mbox-names = "tx", "rx";
+ };
+
+ r5f@1 {
+ compatible = "xlnx,zynqmp-r5f";
+ reg = <0x1 0x0 0x0 0x10000>, <0x1 0x20000 0x0 0x10000>;
+ reg-names = "atcm", "btcm";
+ power-domains = <&zynqmp_firmware PD_RPU_1>,
+ <&zynqmp_firmware PD_R5_1_ATCM>,
+ <&zynqmp_firmware PD_R5_1_BTCM>;
+ memory-region = <&rproc_1_fw_image>, <&rpu1vdev0buffer>,
+ <&rpu1vdev0vring0>, <&rpu1vdev0vring1>;
+ mboxes = <&ipi_mailbox_rpu1 0>, <&ipi_mailbox_rpu1 1>;
+ mbox-names = "tx", "rx";
+ };
};
};
...
--
2.25.1
next prev parent reply other threads:[~2023-10-13 4:23 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-13 4:22 [PATCH v6 0/4] add zynqmp TCM bindings Tanmay Shah
2023-10-13 4:22 ` Tanmay Shah [this message]
2023-10-13 4:22 ` [PATCH v6 2/4] dts: zynqmp: add properties for TCM in remoteproc Tanmay Shah
2023-10-13 4:22 ` [PATCH v6 3/4] remoteproc: zynqmp: add pm domains support Tanmay Shah
2023-10-18 17:38 ` Mathieu Poirier
2023-10-30 16:09 ` Tanmay Shah
2023-10-13 4:22 ` [PATCH v6 4/4] remoteproc: zynqmp: parse TCM from device tree Tanmay Shah
2023-10-19 11:03 ` kernel test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231013042229.3954527-2-tanmay.shah@amd.com \
--to=tanmay.shah@amd.com \
--cc=andersson@kernel.org \
--cc=ben.levinsky@amd.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-remoteproc@vger.kernel.org \
--cc=mathieu.poirier@linaro.org \
--cc=michal.simek@amd.com \
--cc=radhey.shyam.pandey@amd.com \
--cc=robh+dt@kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox