public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Bjorn Helgaas <helgaas@kernel.org>
To: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
Cc: linux-pci@vger.kernel.org, "Bjorn Helgaas" <bhelgaas@google.com>,
	"Lorenzo Pieralisi" <lorenzo.pieralisi@arm.com>,
	"Krzysztof Wilczyński" <kw@linux.com>,
	"Stephen Rothwell" <sfr@canb.auug.org.au>,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 1/1] PCI: dwc: Use FIELD_GET/PREP()
Date: Tue, 24 Oct 2023 10:56:49 -0500	[thread overview]
Message-ID: <20231024155649.GA1655811@bhelgaas> (raw)
In-Reply-To: <20231024110336.26264-1-ilpo.jarvinen@linux.intel.com>

On Tue, Oct 24, 2023 at 02:03:36PM +0300, Ilpo Järvinen wrote:
> Convert open-coded variants of PCI field access into FIELD_GET/PREP()
> to make the code easier to understand.
> 
> Add two missing defines into pci_regs.h. Logically, the Max No-Snoop
> Latency Register is a separate word sized register in the PCIe spec,
> but the pre-existing LTR defines in pci_regs.h with dword long values
> seem to consider the registers together (the same goes for the only
> user). Thus, follow the custom and make the new values also take both
> word long LTR registers as a joint dword register.
> 
> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

Replaced the previous "PCI: dwc: Use FIELD_GET/PREP()" patch on
pci/field-get, thanks!

Here's the diff from a1a3a781d0ba (the previous head of pci/field-get)
to the current head:

diff --git a/drivers/pci/controller/dwc/pcie-tegra194.c b/drivers/pci/controller/dwc/pcie-tegra194.c
index 12d5ab2f5219..f2a515b639ab 100644
--- a/drivers/pci/controller/dwc/pcie-tegra194.c
+++ b/drivers/pci/controller/dwc/pcie-tegra194.c
@@ -126,6 +126,7 @@
 
 #define APPL_LTR_MSG_1				0xC4
 #define LTR_MSG_REQ				BIT(15)
+#define LTR_NOSNOOP_MSG_REQ			BIT(31)
 
 #define APPL_LTR_MSG_2				0xC8
 #define APPL_LTR_MSG_2_LTR_MSG_REQ_STATE	BIT(3)
@@ -495,8 +496,12 @@ static irqreturn_t tegra_pcie_ep_irq_thread(int irq, void *arg)
 		ktime_t timeout;
 
 		/* 110us for both snoop and no-snoop */
-		val = 110 | FIELD_PREP(PCI_LTR_SCALE_SHIFT, 2) | LTR_MSG_REQ;
-		val |= FIELD_PREP(PCI_LTR_NOSNOOP_VALUE, val);
+		val = FIELD_PREP(PCI_LTR_VALUE_MASK, 110) |
+		      FIELD_PREP(PCI_LTR_SCALE_MASK, 2) |
+		      LTR_MSG_REQ |
+		      FIELD_PREP(PCI_LTR_NOSNOOP_VALUE, 110) |
+		      FIELD_PREP(PCI_LTR_NOSNOOP_SCALE, 2) |
+		      LTR_NOSNOOP_MSG_REQ;
 		appl_writel(pcie, val, APPL_LTR_MSG_1);
 
 		/* Send LTR upstream */

> ---
> 
> This patch REPLACES the previous patch which caused the build fail on
> arm and also failed to copy the entire value into nosnoop register
> like the original code did.
> 
> v2:
> - Correct define name used in FIELD_PREP()
> - Correctly copy the contents of the full register, not just the
>   Max Latency Value field.
> - Wrap also the 110 literal into FIELD_PREP()
> 
>  drivers/pci/controller/dwc/pcie-designware-ep.c |  7 ++++---
>  drivers/pci/controller/dwc/pcie-tegra194.c      | 10 +++++++---
>  include/uapi/linux/pci_regs.h                   |  2 ++
>  3 files changed, 13 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/pci/controller/dwc/pcie-designware-ep.c b/drivers/pci/controller/dwc/pcie-designware-ep.c
> index f9182f8d552f..20bef1436bfb 100644
> --- a/drivers/pci/controller/dwc/pcie-designware-ep.c
> +++ b/drivers/pci/controller/dwc/pcie-designware-ep.c
> @@ -6,6 +6,7 @@
>   * Author: Kishon Vijay Abraham I <kishon@ti.com>
>   */
>  
> +#include <linux/bitfield.h>
>  #include <linux/of.h>
>  #include <linux/platform_device.h>
>  
> @@ -334,7 +335,7 @@ static int dw_pcie_ep_get_msi(struct pci_epc *epc, u8 func_no, u8 vfunc_no)
>  	if (!(val & PCI_MSI_FLAGS_ENABLE))
>  		return -EINVAL;
>  
> -	val = (val & PCI_MSI_FLAGS_QSIZE) >> 4;
> +	val = FIELD_GET(PCI_MSI_FLAGS_QSIZE, val);
>  
>  	return val;
>  }
> @@ -357,7 +358,7 @@ static int dw_pcie_ep_set_msi(struct pci_epc *epc, u8 func_no, u8 vfunc_no,
>  	reg = ep_func->msi_cap + func_offset + PCI_MSI_FLAGS;
>  	val = dw_pcie_readw_dbi(pci, reg);
>  	val &= ~PCI_MSI_FLAGS_QMASK;
> -	val |= (interrupts << 1) & PCI_MSI_FLAGS_QMASK;
> +	val |= FIELD_PREP(PCI_MSI_FLAGS_QMASK, interrupts);
>  	dw_pcie_dbi_ro_wr_en(pci);
>  	dw_pcie_writew_dbi(pci, reg, val);
>  	dw_pcie_dbi_ro_wr_dis(pci);
> @@ -584,7 +585,7 @@ int dw_pcie_ep_raise_msix_irq(struct dw_pcie_ep *ep, u8 func_no,
>  
>  	reg = ep_func->msix_cap + func_offset + PCI_MSIX_TABLE;
>  	tbl_offset = dw_pcie_readl_dbi(pci, reg);
> -	bir = (tbl_offset & PCI_MSIX_TABLE_BIR);
> +	bir = FIELD_GET(PCI_MSIX_TABLE_BIR, tbl_offset);
>  	tbl_offset &= PCI_MSIX_TABLE_OFFSET;
>  
>  	msix_tbl = ep->epf_bar[bir]->addr + tbl_offset;
> diff --git a/drivers/pci/controller/dwc/pcie-tegra194.c b/drivers/pci/controller/dwc/pcie-tegra194.c
> index 248cd9347e8f..f2a515b639ab 100644
> --- a/drivers/pci/controller/dwc/pcie-tegra194.c
> +++ b/drivers/pci/controller/dwc/pcie-tegra194.c
> @@ -126,7 +126,7 @@
>  
>  #define APPL_LTR_MSG_1				0xC4
>  #define LTR_MSG_REQ				BIT(15)
> -#define LTR_MST_NO_SNOOP_SHIFT			16
> +#define LTR_NOSNOOP_MSG_REQ			BIT(31)
>  
>  #define APPL_LTR_MSG_2				0xC8
>  #define APPL_LTR_MSG_2_LTR_MSG_REQ_STATE	BIT(3)
> @@ -496,8 +496,12 @@ static irqreturn_t tegra_pcie_ep_irq_thread(int irq, void *arg)
>  		ktime_t timeout;
>  
>  		/* 110us for both snoop and no-snoop */
> -		val = 110 | (2 << PCI_LTR_SCALE_SHIFT) | LTR_MSG_REQ;
> -		val |= (val << LTR_MST_NO_SNOOP_SHIFT);
> +		val = FIELD_PREP(PCI_LTR_VALUE_MASK, 110) |
> +		      FIELD_PREP(PCI_LTR_SCALE_MASK, 2) |
> +		      LTR_MSG_REQ |
> +		      FIELD_PREP(PCI_LTR_NOSNOOP_VALUE, 110) |
> +		      FIELD_PREP(PCI_LTR_NOSNOOP_SCALE, 2) |
> +		      LTR_NOSNOOP_MSG_REQ;
>  		appl_writel(pcie, val, APPL_LTR_MSG_1);
>  
>  		/* Send LTR upstream */
> diff --git a/include/uapi/linux/pci_regs.h b/include/uapi/linux/pci_regs.h
> index e5f558d96493..495f0ae4ecd5 100644
> --- a/include/uapi/linux/pci_regs.h
> +++ b/include/uapi/linux/pci_regs.h
> @@ -975,6 +975,8 @@
>  #define  PCI_LTR_VALUE_MASK	0x000003ff
>  #define  PCI_LTR_SCALE_MASK	0x00001c00
>  #define  PCI_LTR_SCALE_SHIFT	10
> +#define  PCI_LTR_NOSNOOP_VALUE	0x03ff0000 /* Max No-Snoop Latency Value */
> +#define  PCI_LTR_NOSNOOP_SCALE	0x1c000000 /* Scale for Max Value */
>  #define PCI_EXT_CAP_LTR_SIZEOF	8
>  
>  /* Access Control Service */
> -- 
> 2.30.2
> 

      reply	other threads:[~2023-10-24 15:56 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-10-24 11:03 [PATCH v2 1/1] PCI: dwc: Use FIELD_GET/PREP() Ilpo Järvinen
2023-10-24 15:56 ` Bjorn Helgaas [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20231024155649.GA1655811@bhelgaas \
    --to=helgaas@kernel.org \
    --cc=bhelgaas@google.com \
    --cc=ilpo.jarvinen@linux.intel.com \
    --cc=kw@linux.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=sfr@canb.auug.org.au \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox