[PATCH v2 1/6] media: dt-bindings: media: imx335: Add supply bindings

[PATCH v2 1/6] media: dt-bindings: media: imx335: Add supply bindings

[Kieran Bingham]

Add the bindings for the supply references used on the IMX335.

Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>

---
v2:
 - Remove the supplies from required properties to prevent ABI breakage.

Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
---
 .../devicetree/bindings/media/i2c/sony,imx335.yaml  | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx335.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx335.yaml
index a167dcdb3a32..106c36ee966d 100644
--- a/Documentation/devicetree/bindings/media/i2c/sony,imx335.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/sony,imx335.yaml
@@ -32,6 +32,15 @@ properties:
     description: Clock frequency from 6 to 27 MHz, 37.125MHz, 74.25MHz
     maxItems: 1
 
+  avdd-supply:
+    description: Analog power supply (2.9V)
+
+  ovdd-supply:
+    description: Interface power supply (1.8V)
+
+  dvdd-supply:
+    description: Digital power supply (1.2V)
+
   reset-gpios:
     description: Reference to the GPIO connected to the XCLR pin, if any.
     maxItems: 1
@@ -79,6 +88,10 @@ examples:
             assigned-clock-parents = <&imx335_clk_parent>;
             assigned-clock-rates = <24000000>;
 
+            avdd-supply = <&camera_vdda_2v9>;
+            ovdd-supply = <&camera_vddo_1v8>;
+            dvdd-supply = <&camera_vddd_1v2>;
+
             port {
                 imx335: endpoint {
                     remote-endpoint = <&cam>;
-- 
2.34.1

Re: [PATCH v2 1/6] media: dt-bindings: media: imx335: Add supply bindings

[Conor Dooley]

[-- Attachment #1: Type: text/plain, Size: 607 bytes --]

On Wed, Nov 01, 2023 at 01:13:49PM +0000, Kieran Bingham wrote:
> Add the bindings for the supply references used on the IMX335.
> 
> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
> Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
> 
> ---
> v2:
>  - Remove the supplies from required properties to prevent ABI breakage.
> 
> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>

FYI, double signoff, mb your tooling be acting up.

Acked-by: Conor Dooley <conor.dooley@microchip.com>

Cheers,
Conor.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

[PATCH v2 2/6] media: i2c: imx335: Fix logging line endings

[Kieran Bingham]

The use of \n as a line ending throughout the driver is inconsistent.

While it is possible for logging messages to automatically have newlines
added by the kernel printk mechanisms, this is specifically to support
continued lines with PR_CONT and the lack of a new line character
indicates that the text is a fragment of a continuation line.

As each of these lines are whole and not fragments, explicitly define the
newline for consistency.

Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
---
 drivers/media/i2c/imx335.c | 42 +++++++++++++++++++-------------------
 1 file changed, 21 insertions(+), 21 deletions(-)

diff --git a/drivers/media/i2c/imx335.c b/drivers/media/i2c/imx335.c
index ec729126274b..cbabef968e21 100644
--- a/drivers/media/i2c/imx335.c
+++ b/drivers/media/i2c/imx335.c
@@ -396,7 +396,7 @@ static int imx335_update_exp_gain(struct imx335 *imx335, u32 exposure, u32 gain)
 	lpfr = imx335->vblank + imx335->cur_mode->height;
 	shutter = lpfr - exposure;
 
-	dev_dbg(imx335->dev, "Set exp %u, analog gain %u, shutter %u, lpfr %u",
+	dev_dbg(imx335->dev, "Set exp %u, analog gain %u, shutter %u, lpfr %u\n",
 		exposure, gain, shutter, lpfr);
 
 	ret = imx335_write_reg(imx335, IMX335_REG_HOLD, 1, 1);
@@ -443,7 +443,7 @@ static int imx335_set_ctrl(struct v4l2_ctrl *ctrl)
 	case V4L2_CID_VBLANK:
 		imx335->vblank = imx335->vblank_ctrl->val;
 
-		dev_dbg(imx335->dev, "Received vblank %u, new lpfr %u",
+		dev_dbg(imx335->dev, "Received vblank %u, new lpfr %u\n",
 			imx335->vblank,
 			imx335->vblank + imx335->cur_mode->height);
 
@@ -462,7 +462,7 @@ static int imx335_set_ctrl(struct v4l2_ctrl *ctrl)
 		exposure = ctrl->val;
 		analog_gain = imx335->again_ctrl->val;
 
-		dev_dbg(imx335->dev, "Received exp %u, analog gain %u",
+		dev_dbg(imx335->dev, "Received exp %u, analog gain %u\n",
 			exposure, analog_gain);
 
 		ret = imx335_update_exp_gain(imx335, exposure, analog_gain);
@@ -471,7 +471,7 @@ static int imx335_set_ctrl(struct v4l2_ctrl *ctrl)
 
 		break;
 	default:
-		dev_err(imx335->dev, "Invalid control %d", ctrl->id);
+		dev_err(imx335->dev, "Invalid control %d\n", ctrl->id);
 		ret = -EINVAL;
 	}
 
@@ -652,14 +652,14 @@ static int imx335_start_streaming(struct imx335 *imx335)
 	ret = imx335_write_regs(imx335, reg_list->regs,
 				reg_list->num_of_regs);
 	if (ret) {
-		dev_err(imx335->dev, "fail to write initial registers");
+		dev_err(imx335->dev, "fail to write initial registers\n");
 		return ret;
 	}
 
 	/* Setup handler will write actual exposure and gain */
 	ret =  __v4l2_ctrl_handler_setup(imx335->sd.ctrl_handler);
 	if (ret) {
-		dev_err(imx335->dev, "fail to setup handler");
+		dev_err(imx335->dev, "fail to setup handler\n");
 		return ret;
 	}
 
@@ -667,7 +667,7 @@ static int imx335_start_streaming(struct imx335 *imx335)
 	ret = imx335_write_reg(imx335, IMX335_REG_MODE_SELECT,
 			       1, IMX335_MODE_STREAMING);
 	if (ret) {
-		dev_err(imx335->dev, "fail to start streaming");
+		dev_err(imx335->dev, "fail to start streaming\n");
 		return ret;
 	}
 
@@ -744,7 +744,7 @@ static int imx335_detect(struct imx335 *imx335)
 		return ret;
 
 	if (val != IMX335_ID) {
-		dev_err(imx335->dev, "chip id mismatch: %x!=%x",
+		dev_err(imx335->dev, "chip id mismatch: %x!=%x\n",
 			IMX335_ID, val);
 		return -ENXIO;
 	}
@@ -776,7 +776,7 @@ static int imx335_parse_hw_config(struct imx335 *imx335)
 	imx335->reset_gpio = devm_gpiod_get_optional(imx335->dev, "reset",
 						     GPIOD_OUT_LOW);
 	if (IS_ERR(imx335->reset_gpio)) {
-		dev_err(imx335->dev, "failed to get reset gpio %ld",
+		dev_err(imx335->dev, "failed to get reset gpio %ld\n",
 			PTR_ERR(imx335->reset_gpio));
 		return PTR_ERR(imx335->reset_gpio);
 	}
@@ -784,13 +784,13 @@ static int imx335_parse_hw_config(struct imx335 *imx335)
 	/* Get sensor input clock */
 	imx335->inclk = devm_clk_get(imx335->dev, NULL);
 	if (IS_ERR(imx335->inclk)) {
-		dev_err(imx335->dev, "could not get inclk");
+		dev_err(imx335->dev, "could not get inclk\n");
 		return PTR_ERR(imx335->inclk);
 	}
 
 	rate = clk_get_rate(imx335->inclk);
 	if (rate != IMX335_INCLK_RATE) {
-		dev_err(imx335->dev, "inclk frequency mismatch");
+		dev_err(imx335->dev, "inclk frequency mismatch\n");
 		return -EINVAL;
 	}
 
@@ -805,14 +805,14 @@ static int imx335_parse_hw_config(struct imx335 *imx335)
 
 	if (bus_cfg.bus.mipi_csi2.num_data_lanes != IMX335_NUM_DATA_LANES) {
 		dev_err(imx335->dev,
-			"number of CSI2 data lanes %d is not supported",
+			"number of CSI2 data lanes %d is not supported\n",
 			bus_cfg.bus.mipi_csi2.num_data_lanes);
 		ret = -EINVAL;
 		goto done_endpoint_free;
 	}
 
 	if (!bus_cfg.nr_of_link_frequencies) {
-		dev_err(imx335->dev, "no link frequencies defined");
+		dev_err(imx335->dev, "no link frequencies defined\n");
 		ret = -EINVAL;
 		goto done_endpoint_free;
 	}
@@ -863,7 +863,7 @@ static int imx335_power_on(struct device *dev)
 
 	ret = clk_prepare_enable(imx335->inclk);
 	if (ret) {
-		dev_err(imx335->dev, "fail to enable inclk");
+		dev_err(imx335->dev, "fail to enable inclk\n");
 		goto error_reset;
 	}
 
@@ -969,7 +969,7 @@ static int imx335_init_controls(struct imx335 *imx335)
 		imx335->hblank_ctrl->flags |= V4L2_CTRL_FLAG_READ_ONLY;
 
 	if (ctrl_hdlr->error) {
-		dev_err(imx335->dev, "control init failed: %d",
+		dev_err(imx335->dev, "control init failed: %d\n",
 			ctrl_hdlr->error);
 		v4l2_ctrl_handler_free(ctrl_hdlr);
 		return ctrl_hdlr->error;
@@ -1002,7 +1002,7 @@ static int imx335_probe(struct i2c_client *client)
 
 	ret = imx335_parse_hw_config(imx335);
 	if (ret) {
-		dev_err(imx335->dev, "HW configuration is not supported");
+		dev_err(imx335->dev, "HW configuration is not supported\n");
 		return ret;
 	}
 
@@ -1010,14 +1010,14 @@ static int imx335_probe(struct i2c_client *client)
 
 	ret = imx335_power_on(imx335->dev);
 	if (ret) {
-		dev_err(imx335->dev, "failed to power-on the sensor");
+		dev_err(imx335->dev, "failed to power-on the sensor\n");
 		goto error_mutex_destroy;
 	}
 
 	/* Check module identity */
 	ret = imx335_detect(imx335);
 	if (ret) {
-		dev_err(imx335->dev, "failed to find sensor: %d", ret);
+		dev_err(imx335->dev, "failed to find sensor: %d\n", ret);
 		goto error_power_off;
 	}
 
@@ -1027,7 +1027,7 @@ static int imx335_probe(struct i2c_client *client)
 
 	ret = imx335_init_controls(imx335);
 	if (ret) {
-		dev_err(imx335->dev, "failed to init controls: %d", ret);
+		dev_err(imx335->dev, "failed to init controls: %d\n", ret);
 		goto error_power_off;
 	}
 
@@ -1039,14 +1039,14 @@ static int imx335_probe(struct i2c_client *client)
 	imx335->pad.flags = MEDIA_PAD_FL_SOURCE;
 	ret = media_entity_pads_init(&imx335->sd.entity, 1, &imx335->pad);
 	if (ret) {
-		dev_err(imx335->dev, "failed to init entity pads: %d", ret);
+		dev_err(imx335->dev, "failed to init entity pads: %d\n", ret);
 		goto error_handler_free;
 	}
 
 	ret = v4l2_async_register_subdev_sensor(&imx335->sd);
 	if (ret < 0) {
 		dev_err(imx335->dev,
-			"failed to register async subdev: %d", ret);
+			"failed to register async subdev: %d\n", ret);
 		goto error_media_entity;
 	}
 
-- 
2.34.1

[PATCH v2 3/6] media: i2c: imx335: Improve configuration error reporting

[Kieran Bingham]

The existing imx335_parse_hw_config function has two paths
that can be taken without reporting to the user the reason
for failing to accept the hardware configuration.

Extend the error reporting paths to identify failures when
probing the device.

Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>

---
v2:
 - Fix line endings

Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
---
 drivers/media/i2c/imx335.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/media/i2c/imx335.c b/drivers/media/i2c/imx335.c
index cbabef968e21..31c612c6bdd8 100644
--- a/drivers/media/i2c/imx335.c
+++ b/drivers/media/i2c/imx335.c
@@ -795,8 +795,10 @@ static int imx335_parse_hw_config(struct imx335 *imx335)
 	}
 
 	ep = fwnode_graph_get_next_endpoint(fwnode, NULL);
-	if (!ep)
+	if (!ep) {
+		dev_err(imx335->dev, "Failed to get next endpoint\n");
 		return -ENXIO;
+	}
 
 	ret = v4l2_fwnode_endpoint_alloc_parse(ep, &bus_cfg);
 	fwnode_handle_put(ep);
@@ -821,6 +823,8 @@ static int imx335_parse_hw_config(struct imx335 *imx335)
 		if (bus_cfg.link_frequencies[i] == IMX335_LINK_FREQ)
 			goto done_endpoint_free;
 
+	dev_err(imx335->dev, "no compatible link frequencies found\n");
+
 	ret = -EINVAL;
 
 done_endpoint_free:
-- 
2.34.1

[PATCH v2 4/6] media: i2c: imx335: Enable regulator supplies

[Kieran Bingham]

Provide support for enabling and disabling regulator supplies to control
power to the camera sensor.

While updating the power on function, document that a sleep is
represented as 'T4' in the datasheet power on sequence.

Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>

---

v2:
 - document 'supplies' member variable
 - disable regulators in error path
 - Remove 'unhelpful' comments
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
---
 drivers/media/i2c/imx335.c | 38 ++++++++++++++++++++++++++++++++++++--
 1 file changed, 36 insertions(+), 2 deletions(-)

diff --git a/drivers/media/i2c/imx335.c b/drivers/media/i2c/imx335.c
index 31c612c6bdd8..f17ce40b9c77 100644
--- a/drivers/media/i2c/imx335.c
+++ b/drivers/media/i2c/imx335.c
@@ -75,6 +75,14 @@ struct imx335_reg_list {
 	const struct imx335_reg *regs;
 };
 
+static const char * const imx335_supply_name[] = {
+	"avdd", /* Analog (2.9V) supply */
+	"ovdd", /* Digital I/O (1.8V) supply */
+	"dvdd", /* Digital Core (1.2V) supply */
+};
+
+#define IMX335_NUM_SUPPLIES ARRAY_SIZE(imx335_supply_name)
+
 /**
  * struct imx335_mode - imx335 sensor mode structure
  * @width: Frame width
@@ -108,6 +116,7 @@ struct imx335_mode {
  * @sd: V4L2 sub-device
  * @pad: Media pad. Only one pad supported
  * @reset_gpio: Sensor reset gpio
+ * @supplies: Regulator supplies to handle power control
  * @inclk: Sensor input clock
  * @ctrl_handler: V4L2 control handler
  * @link_freq_ctrl: Pointer to link frequency control
@@ -126,6 +135,8 @@ struct imx335 {
 	struct v4l2_subdev sd;
 	struct media_pad pad;
 	struct gpio_desc *reset_gpio;
+	struct regulator_bulk_data supplies[IMX335_NUM_SUPPLIES];
+
 	struct clk *inclk;
 	struct v4l2_ctrl_handler ctrl_handler;
 	struct v4l2_ctrl *link_freq_ctrl;
@@ -781,6 +792,17 @@ static int imx335_parse_hw_config(struct imx335 *imx335)
 		return PTR_ERR(imx335->reset_gpio);
 	}
 
+	for (i = 0; i < IMX335_NUM_SUPPLIES; i++)
+		imx335->supplies[i].supply = imx335_supply_name[i];
+
+	ret = devm_regulator_bulk_get(imx335->dev,
+				      IMX335_NUM_SUPPLIES,
+				      imx335->supplies);
+	if (ret) {
+		dev_err(imx335->dev, "Failed to get regulators\n");
+		return ret;
+	}
+
 	/* Get sensor input clock */
 	imx335->inclk = devm_clk_get(imx335->dev, NULL);
 	if (IS_ERR(imx335->inclk)) {
@@ -863,6 +885,17 @@ static int imx335_power_on(struct device *dev)
 	struct imx335 *imx335 = to_imx335(sd);
 	int ret;
 
+	ret = regulator_bulk_enable(IMX335_NUM_SUPPLIES,
+				    imx335->supplies);
+	if (ret) {
+		dev_err(dev, "%s: failed to enable regulators\n",
+			__func__);
+		return ret;
+	}
+
+	usleep_range(500, 550); /* Tlow */
+
+	/* Set XCLR */
 	gpiod_set_value_cansleep(imx335->reset_gpio, 1);
 
 	ret = clk_prepare_enable(imx335->inclk);
@@ -871,12 +904,13 @@ static int imx335_power_on(struct device *dev)
 		goto error_reset;
 	}
 
-	usleep_range(20, 22);
+	usleep_range(20, 22); /* T4 */
 
 	return 0;
 
 error_reset:
 	gpiod_set_value_cansleep(imx335->reset_gpio, 0);
+	regulator_bulk_disable(IMX335_NUM_SUPPLIES, imx335->supplies);
 
 	return ret;
 }
@@ -893,8 +927,8 @@ static int imx335_power_off(struct device *dev)
 	struct imx335 *imx335 = to_imx335(sd);
 
 	gpiod_set_value_cansleep(imx335->reset_gpio, 0);
-
 	clk_disable_unprepare(imx335->inclk);
+	regulator_bulk_disable(IMX335_NUM_SUPPLIES, imx335->supplies);
 
 	return 0;
 }
-- 
2.34.1

Re: [PATCH v2 4/6] media: i2c: imx335: Enable regulator supplies

[Sakari Ailus]

Hi Kieran,

Thanks for the set.

On Wed, Nov 01, 2023 at 01:13:52PM +0000, Kieran Bingham wrote:
> Provide support for enabling and disabling regulator supplies to control
> power to the camera sensor.
> 
> While updating the power on function, document that a sleep is
> represented as 'T4' in the datasheet power on sequence.
> 
> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
> 
> ---
> 
> v2:
>  - document 'supplies' member variable
>  - disable regulators in error path
>  - Remove 'unhelpful' comments
> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
> ---
>  drivers/media/i2c/imx335.c | 38 ++++++++++++++++++++++++++++++++++++--
>  1 file changed, 36 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/media/i2c/imx335.c b/drivers/media/i2c/imx335.c
> index 31c612c6bdd8..f17ce40b9c77 100644
> --- a/drivers/media/i2c/imx335.c
> +++ b/drivers/media/i2c/imx335.c
> @@ -75,6 +75,14 @@ struct imx335_reg_list {
>  	const struct imx335_reg *regs;
>  };
>  
> +static const char * const imx335_supply_name[] = {
> +	"avdd", /* Analog (2.9V) supply */
> +	"ovdd", /* Digital I/O (1.8V) supply */
> +	"dvdd", /* Digital Core (1.2V) supply */
> +};
> +
> +#define IMX335_NUM_SUPPLIES ARRAY_SIZE(imx335_supply_name)

Please use plain ARRAY_SIZE() where you needed this.

> +
>  /**
>   * struct imx335_mode - imx335 sensor mode structure
>   * @width: Frame width
> @@ -108,6 +116,7 @@ struct imx335_mode {
>   * @sd: V4L2 sub-device
>   * @pad: Media pad. Only one pad supported
>   * @reset_gpio: Sensor reset gpio
> + * @supplies: Regulator supplies to handle power control
>   * @inclk: Sensor input clock
>   * @ctrl_handler: V4L2 control handler
>   * @link_freq_ctrl: Pointer to link frequency control
> @@ -126,6 +135,8 @@ struct imx335 {
>  	struct v4l2_subdev sd;
>  	struct media_pad pad;
>  	struct gpio_desc *reset_gpio;
> +	struct regulator_bulk_data supplies[IMX335_NUM_SUPPLIES];
> +
>  	struct clk *inclk;
>  	struct v4l2_ctrl_handler ctrl_handler;
>  	struct v4l2_ctrl *link_freq_ctrl;
> @@ -781,6 +792,17 @@ static int imx335_parse_hw_config(struct imx335 *imx335)
>  		return PTR_ERR(imx335->reset_gpio);
>  	}
>  
> +	for (i = 0; i < IMX335_NUM_SUPPLIES; i++)
> +		imx335->supplies[i].supply = imx335_supply_name[i];
> +
> +	ret = devm_regulator_bulk_get(imx335->dev,
> +				      IMX335_NUM_SUPPLIES,
> +				      imx335->supplies);
> +	if (ret) {
> +		dev_err(imx335->dev, "Failed to get regulators\n");
> +		return ret;
> +	}
> +
>  	/* Get sensor input clock */
>  	imx335->inclk = devm_clk_get(imx335->dev, NULL);
>  	if (IS_ERR(imx335->inclk)) {
> @@ -863,6 +885,17 @@ static int imx335_power_on(struct device *dev)
>  	struct imx335 *imx335 = to_imx335(sd);
>  	int ret;
>  
> +	ret = regulator_bulk_enable(IMX335_NUM_SUPPLIES,
> +				    imx335->supplies);
> +	if (ret) {
> +		dev_err(dev, "%s: failed to enable regulators\n",
> +			__func__);
> +		return ret;
> +	}
> +
> +	usleep_range(500, 550); /* Tlow */
> +
> +	/* Set XCLR */
>  	gpiod_set_value_cansleep(imx335->reset_gpio, 1);
>  
>  	ret = clk_prepare_enable(imx335->inclk);
> @@ -871,12 +904,13 @@ static int imx335_power_on(struct device *dev)
>  		goto error_reset;
>  	}
>  
> -	usleep_range(20, 22);
> +	usleep_range(20, 22); /* T4 */
>  
>  	return 0;
>  
>  error_reset:
>  	gpiod_set_value_cansleep(imx335->reset_gpio, 0);
> +	regulator_bulk_disable(IMX335_NUM_SUPPLIES, imx335->supplies);
>  
>  	return ret;
>  }
> @@ -893,8 +927,8 @@ static int imx335_power_off(struct device *dev)
>  	struct imx335 *imx335 = to_imx335(sd);
>  
>  	gpiod_set_value_cansleep(imx335->reset_gpio, 0);
> -
>  	clk_disable_unprepare(imx335->inclk);
> +	regulator_bulk_disable(IMX335_NUM_SUPPLIES, imx335->supplies);
>  
>  	return 0;
>  }

-- 
Regards,

Sakari Ailus

[PATCH v2 5/6] media: i2c: imx335: Implement get selection API

[Kieran Bingham]

Support reporting of the Sensor Native and Active pixel array areas
through the Selection API.

The implementation reports a single target crop only for the mode that
is presently exposed by the driver.

Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>

---
v2:
 - Also define .set_selection

Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
---
 drivers/media/i2c/imx335.c | 45 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 45 insertions(+)

diff --git a/drivers/media/i2c/imx335.c b/drivers/media/i2c/imx335.c
index f17ce40b9c77..ce41e9f669bc 100644
--- a/drivers/media/i2c/imx335.c
+++ b/drivers/media/i2c/imx335.c
@@ -55,6 +55,14 @@
 #define IMX335_REG_MIN		0x00
 #define IMX335_REG_MAX		0xfffff
 
+/* IMX335 native and active pixel array size. */
+#define IMX335_NATIVE_WIDTH		2616U
+#define IMX335_NATIVE_HEIGHT		1964U
+#define IMX335_PIXEL_ARRAY_LEFT		12U
+#define IMX335_PIXEL_ARRAY_TOP		12U
+#define IMX335_PIXEL_ARRAY_WIDTH	2592U
+#define IMX335_PIXEL_ARRAY_HEIGHT	1944U
+
 /**
  * struct imx335_reg - imx335 sensor register
  * @address: Register address
@@ -647,6 +655,41 @@ static int imx335_init_pad_cfg(struct v4l2_subdev *sd,
 	return imx335_set_pad_format(sd, sd_state, &fmt);
 }
 
+/**
+ * imx335_get_selection() - Selection API
+ * @sd: pointer to imx335 V4L2 sub-device structure
+ * @sd_state: V4L2 sub-device configuration
+ * @sel: V4L2 selection info
+ *
+ * Return: 0 if successful, error code otherwise.
+ */
+static int imx335_get_selection(struct v4l2_subdev *sd,
+				struct v4l2_subdev_state *sd_state,
+				struct v4l2_subdev_selection *sel)
+{
+	switch (sel->target) {
+	case V4L2_SEL_TGT_NATIVE_SIZE:
+		sel->r.top = 0;
+		sel->r.left = 0;
+		sel->r.width = IMX335_NATIVE_WIDTH;
+		sel->r.height = IMX335_NATIVE_HEIGHT;
+
+		return 0;
+
+	case V4L2_SEL_TGT_CROP:
+	case V4L2_SEL_TGT_CROP_DEFAULT:
+	case V4L2_SEL_TGT_CROP_BOUNDS:
+		sel->r.top = IMX335_PIXEL_ARRAY_TOP;
+		sel->r.left = IMX335_PIXEL_ARRAY_LEFT;
+		sel->r.width = IMX335_PIXEL_ARRAY_WIDTH;
+		sel->r.height = IMX335_PIXEL_ARRAY_HEIGHT;
+
+		return 0;
+	}
+
+	return -EINVAL;
+}
+
 /**
  * imx335_start_streaming() - Start sensor stream
  * @imx335: pointer to imx335 device
@@ -864,6 +907,8 @@ static const struct v4l2_subdev_pad_ops imx335_pad_ops = {
 	.init_cfg = imx335_init_pad_cfg,
 	.enum_mbus_code = imx335_enum_mbus_code,
 	.enum_frame_size = imx335_enum_frame_size,
+	.get_selection = imx335_get_selection,
+	.set_selection = imx335_get_selection,
 	.get_fmt = imx335_get_pad_format,
 	.set_fmt = imx335_set_pad_format,
 };
-- 
2.34.1

[PATCH v2 6/6] media: i2c: imx335: Fix hblank min/max values

[Kieran Bingham]

The V4L2_CID_HBLANK control is marked as readonly and can only be a
single value.

Set the minimum and maximum value to match the mode value.

Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
---
 drivers/media/i2c/imx335.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/media/i2c/imx335.c b/drivers/media/i2c/imx335.c
index ce41e9f669bc..5373775cf63f 100644
--- a/drivers/media/i2c/imx335.c
+++ b/drivers/media/i2c/imx335.c
@@ -1045,8 +1045,8 @@ static int imx335_init_controls(struct imx335 *imx335)
 	imx335->hblank_ctrl = v4l2_ctrl_new_std(ctrl_hdlr,
 						&imx335_ctrl_ops,
 						V4L2_CID_HBLANK,
-						IMX335_REG_MIN,
-						IMX335_REG_MAX,
+						mode->hblank,
+						mode->hblank,
 						1, mode->hblank);
 	if (imx335->hblank_ctrl)
 		imx335->hblank_ctrl->flags |= V4L2_CTRL_FLAG_READ_ONLY;
-- 
2.34.1