From: kernel test robot <lkp@intel.com>
To: Artur Weber <aweber.kernel@gmail.com>, Lee Jones <lee@kernel.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzk@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Florian Fainelli <florian.fainelli@broadcom.com>,
Ray Jui <rjui@broadcom.com>,
Scott Branden <sbranden@broadcom.com>,
Broadcom internal kernel review list
<bcm-kernel-feedback-list@broadcom.com>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>
Cc: llvm@lists.linux.dev, oe-kbuild-all@lists.linux.dev,
Stanislav Jakubek <stano.jakubek@gmail.com>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-rpi-kernel@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
Artur Weber <aweber.kernel@gmail.com>
Subject: Re: [PATCH 5/6] regulator: bcm590xx: Add support for BCM59054
Date: Mon, 6 Nov 2023 23:04:56 +0800 [thread overview]
Message-ID: <202311062220.2gWiPqvR-lkp@intel.com> (raw)
In-Reply-To: <20231030-bcm59054-v1-5-3517f980c1e3@gmail.com>
Hi Artur,
kernel test robot noticed the following build warnings:
[auto build test WARNING on 05d3ef8bba77c1b5f98d941d8b2d4aeab8118ef1]
url: https://github.com/intel-lab-lkp/linux/commits/Artur-Weber/dt-bindings-mfd-brcm-bcm59056-Convert-to-YAML/20231031-040046
base: 05d3ef8bba77c1b5f98d941d8b2d4aeab8118ef1
patch link: https://lore.kernel.org/r/20231030-bcm59054-v1-5-3517f980c1e3%40gmail.com
patch subject: [PATCH 5/6] regulator: bcm590xx: Add support for BCM59054
config: powerpc64-allyesconfig (https://download.01.org/0day-ci/archive/20231106/202311062220.2gWiPqvR-lkp@intel.com/config)
compiler: clang version 17.0.0 (https://github.com/llvm/llvm-project.git 4a5ac14ee968ff0ad5d2cc1ffa0299048db4c88a)
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20231106/202311062220.2gWiPqvR-lkp@intel.com/reproduce)
If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202311062220.2gWiPqvR-lkp@intel.com/
All warnings (new ones prefixed by >>):
>> drivers/regulator/bcm590xx-regulator.c:591:13: warning: variable 'n_regulators' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized]
591 | } else if (pmu->mfd->device_type == BCM59056_TYPE) {
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/regulator/bcm590xx-regulator.c:597:6: note: uninitialized use occurs here
597 | n_regulators,
| ^~~~~~~~~~~~
drivers/regulator/bcm590xx-regulator.c:591:9: note: remove the 'if' if its condition is always true
591 | } else if (pmu->mfd->device_type == BCM59056_TYPE) {
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/regulator/bcm590xx-regulator.c:577:18: note: initialize the variable 'n_regulators' to silence this warning
577 | int n_regulators;
| ^
| = 0
1 warning generated.
vim +591 drivers/regulator/bcm590xx-regulator.c
569
570 static int bcm590xx_probe(struct platform_device *pdev)
571 {
572 struct bcm590xx *bcm590xx = dev_get_drvdata(pdev->dev.parent);
573 struct bcm590xx_reg *pmu;
574 struct regulator_config config = { };
575 struct bcm590xx_info *info;
576 struct regulator_dev *rdev;
577 int n_regulators;
578 int i;
579
580 pmu = devm_kzalloc(&pdev->dev, sizeof(*pmu), GFP_KERNEL);
581 if (!pmu)
582 return -ENOMEM;
583
584 pmu->mfd = bcm590xx;
585
586 platform_set_drvdata(pdev, pmu);
587
588 if (pmu->mfd->device_type == BCM59054_TYPE) {
589 info = bcm59054_regs;
590 n_regulators = BCM59054_NUM_REGS;
> 591 } else if (pmu->mfd->device_type == BCM59056_TYPE) {
592 info = bcm59056_regs;
593 n_regulators = BCM59056_NUM_REGS;
594 }
595
596 pmu->desc = devm_kcalloc(&pdev->dev,
597 n_regulators,
598 sizeof(struct regulator_desc),
599 GFP_KERNEL);
600 if (!pmu->desc)
601 return -ENOMEM;
602
603 /* Register the regulators */
604 for (i = 0; i < n_regulators; i++, info++) {
605 pmu->desc[i].name = info->name;
606 pmu->desc[i].of_match = of_match_ptr(info->name);
607 pmu->desc[i].regulators_node = of_match_ptr("regulators");
608 pmu->desc[i].supply_name = info->vin_name;
609 pmu->desc[i].id = i;
610 pmu->desc[i].volt_table = info->volt_table;
611 pmu->desc[i].n_voltages = info->n_voltages;
612 pmu->desc[i].linear_ranges = info->linear_ranges;
613 pmu->desc[i].n_linear_ranges = info->n_linear_ranges;
614
615 if (bcm590xx_reg_is_ldo(pmu, i) || \
616 bcm590xx_reg_is_gpldo(pmu, i)) {
617 pmu->desc[i].ops = &bcm590xx_ops_ldo;
618 pmu->desc[i].vsel_mask = BCM590XX_LDO_VSEL_MASK;
619 } else if (bcm590xx_reg_is_static(pmu, i)) {
620 pmu->desc[i].ops = &bcm590xx_ops_static;
621 } else {
622 pmu->desc[i].ops = &bcm590xx_ops_dcdc;
623 pmu->desc[i].vsel_mask = BCM590XX_SR_VSEL_MASK;
624 }
625
626 if (bcm590xx_reg_is_vbus(pmu, i)) {
627 pmu->desc[i].enable_mask = BCM590XX_VBUS_ENABLE;
628 } else {
629 pmu->desc[i].vsel_reg = \
630 bcm590xx_get_vsel_register(pmu, i);
631 pmu->desc[i].enable_mask = \
632 bcm590xx_get_enable_mask(pmu, i);
633 pmu->desc[i].enable_is_inverted = true;
634 }
635 pmu->desc[i].enable_reg = \
636 bcm590xx_get_enable_register(pmu, i);
637 pmu->desc[i].type = REGULATOR_VOLTAGE;
638 pmu->desc[i].owner = THIS_MODULE;
639
640 config.dev = pmu->mfd->dev;
641 config.driver_data = pmu;
642 if (bcm590xx_reg_is_secondary(pmu, i))
643 config.regmap = pmu->mfd->regmap_sec;
644 else
645 config.regmap = pmu->mfd->regmap_pri;
646
647 rdev = devm_regulator_register(&pdev->dev, &pmu->desc[i],
648 &config);
649 if (IS_ERR(rdev)) {
650 dev_err(bcm590xx->dev,
651 "failed to register %s regulator\n",
652 pdev->name);
653 return PTR_ERR(rdev);
654 }
655 }
656
657 return 0;
658 }
659
--
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki
next prev parent reply other threads:[~2023-11-06 15:07 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-30 19:36 [PATCH 0/6] mfd: bcm590xx: Add support for BCM59054 Artur Weber
2023-10-30 19:36 ` [PATCH 1/6] dt-bindings: mfd: brcm,bcm59056: Convert to YAML Artur Weber
2023-10-31 5:52 ` Krzysztof Kozlowski
2023-10-31 9:36 ` Artur Weber
2023-10-31 13:54 ` Krzysztof Kozlowski
2023-10-30 19:36 ` [PATCH 2/6] dt-bindings: mfd: brcm,bcm59056: Add compatible for BCM59054 Artur Weber
2023-10-31 5:54 ` Krzysztof Kozlowski
2023-10-30 19:36 ` [PATCH 3/6] ARM: dts: Drop DTS for BCM59056 PMIC Artur Weber
2023-10-30 19:36 ` [PATCH 4/6] mfd: bcm590xx: Add compatible for BCM59054 Artur Weber
2023-10-31 3:38 ` kernel test robot
2023-11-06 9:46 ` kernel test robot
2023-10-30 19:36 ` [PATCH 5/6] regulator: bcm590xx: Add support " Artur Weber
2023-11-06 15:04 ` kernel test robot [this message]
2023-10-30 19:36 ` [PATCH 6/6] regulator: bcm590xx: Add proper handling for PMMODE registers Artur Weber
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=202311062220.2gWiPqvR-lkp@intel.com \
--to=lkp@intel.com \
--cc=aweber.kernel@gmail.com \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=broonie@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=florian.fainelli@broadcom.com \
--cc=krzk@kernel.org \
--cc=lee@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rpi-kernel@lists.infradead.org \
--cc=llvm@lists.linux.dev \
--cc=oe-kbuild-all@lists.linux.dev \
--cc=rjui@broadcom.com \
--cc=robh+dt@kernel.org \
--cc=sbranden@broadcom.com \
--cc=stano.jakubek@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox