From: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
To: Vladimir Oltean <vladimir.oltean@nxp.com>,
Vinicius Costa Gomes <vinicius.gomes@intel.com>,
Jamal Hadi Salim <jhs@mojatatu.com>,
Cong Wang <xiyou.wangcong@gmail.com>,
Jiri Pirko <jiri@resnulli.us>,
"David S . Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>
Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2 net 4/7] net/sched: taprio: get corrected value of cycle_time and interval
Date: Tue, 7 Nov 2023 06:20:20 -0500 [thread overview]
Message-ID: <20231107112023.676016-5-faizal.abdul.rahim@linux.intel.com> (raw)
In-Reply-To: <20231107112023.676016-1-faizal.abdul.rahim@linux.intel.com>
Retrieve adjusted cycle_time and interval values through new APIs.
Note that in some cases where the original values are required,
such as in dump_schedule() and setup_first_end_time(), direct calls
to cycle_time and interval are retained without using the new APIs.
Added a new field, correction_active, in the sched_entry struct to
determine the entry's correction state. This field is required due
to specific flow like find_entry_to_transmit() -> get_interval_end_time()
which retrieves the interval for each entry. During positive cycle
time correction, it's known that the last entry interval requires
correction. However, for negative correction, the affected entry
is unknown, which is why this new field is necessary.
Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
---
net/sched/sch_taprio.c | 50 ++++++++++++++++++++++++++++++------------
1 file changed, 36 insertions(+), 14 deletions(-)
diff --git a/net/sched/sch_taprio.c b/net/sched/sch_taprio.c
index 119dec3bbe88..f18a5fe12f0c 100644
--- a/net/sched/sch_taprio.c
+++ b/net/sched/sch_taprio.c
@@ -61,6 +61,7 @@ struct sched_entry {
u32 gate_mask;
u32 interval;
u8 command;
+ bool correction_active;
};
struct sched_gate_list {
@@ -215,6 +216,31 @@ static void switch_schedules(struct taprio_sched *q,
*admin = NULL;
}
+static bool cycle_corr_active(s64 cycle_time_correction)
+{
+ if (cycle_time_correction == INIT_CYCLE_TIME_CORRECTION)
+ return false;
+ else
+ return true;
+}
+
+u32 get_interval(const struct sched_entry *entry,
+ const struct sched_gate_list *oper)
+{
+ if (entry->correction_active)
+ return entry->interval + oper->cycle_time_correction;
+ else
+ return entry->interval;
+}
+
+s64 get_cycle_time(const struct sched_gate_list *oper)
+{
+ if (cycle_corr_active(oper->cycle_time_correction))
+ return oper->cycle_time + oper->cycle_time_correction;
+ else
+ return oper->cycle_time;
+}
+
/* Get how much time has been already elapsed in the current cycle. */
static s32 get_cycle_time_elapsed(struct sched_gate_list *sched, ktime_t time)
{
@@ -222,7 +248,7 @@ static s32 get_cycle_time_elapsed(struct sched_gate_list *sched, ktime_t time)
s32 time_elapsed;
time_since_sched_start = ktime_sub(time, sched->base_time);
- div_s64_rem(time_since_sched_start, sched->cycle_time, &time_elapsed);
+ div_s64_rem(time_since_sched_start, get_cycle_time(sched), &time_elapsed);
return time_elapsed;
}
@@ -235,8 +261,9 @@ static ktime_t get_interval_end_time(struct sched_gate_list *sched,
s32 cycle_elapsed = get_cycle_time_elapsed(sched, intv_start);
ktime_t intv_end, cycle_ext_end, cycle_end;
- cycle_end = ktime_add_ns(intv_start, sched->cycle_time - cycle_elapsed);
- intv_end = ktime_add_ns(intv_start, entry->interval);
+ cycle_end = ktime_add_ns(intv_start,
+ get_cycle_time(sched) - cycle_elapsed);
+ intv_end = ktime_add_ns(intv_start, get_interval(entry, sched));
cycle_ext_end = ktime_add(cycle_end, sched->cycle_time_extension);
if (ktime_before(intv_end, cycle_end))
@@ -259,14 +286,6 @@ static int duration_to_length(struct taprio_sched *q, u64 duration)
return div_u64(duration * PSEC_PER_NSEC, atomic64_read(&q->picos_per_byte));
}
-static bool cycle_corr_active(s64 cycle_time_correction)
-{
- if (cycle_time_correction == INIT_CYCLE_TIME_CORRECTION)
- return false;
- else
- return true;
-}
-
/* Sets sched->max_sdu[] and sched->max_frm_len[] to the minimum between the
* q->max_sdu[] requested by the user and the max_sdu dynamically determined by
* the maximum open gate durations at the given link speed.
@@ -351,7 +370,7 @@ static struct sched_entry *find_entry_to_transmit(struct sk_buff *skb,
if (!sched)
return NULL;
- cycle = sched->cycle_time;
+ cycle = get_cycle_time(sched);
cycle_elapsed = get_cycle_time_elapsed(sched, time);
curr_intv_end = ktime_sub_ns(time, cycle_elapsed);
cycle_end = ktime_add_ns(curr_intv_end, cycle);
@@ -365,7 +384,7 @@ static struct sched_entry *find_entry_to_transmit(struct sk_buff *skb,
break;
if (!(entry->gate_mask & BIT(tc)) ||
- packet_transmit_time > entry->interval)
+ packet_transmit_time > get_interval(entry, sched))
continue;
txtime = entry->next_txtime;
@@ -543,7 +562,8 @@ static long get_packet_txtime(struct sk_buff *skb, struct Qdisc *sch)
* interval starts.
*/
if (ktime_after(transmit_end_time, interval_end))
- entry->next_txtime = ktime_add(interval_start, sched->cycle_time);
+ entry->next_txtime =
+ ktime_add(interval_start, get_cycle_time(sched));
} while (sched_changed || ktime_after(transmit_end_time, interval_end));
entry->next_txtime = transmit_end_time;
@@ -1045,6 +1065,7 @@ static enum hrtimer_restart advance_sched(struct hrtimer *timer)
oper->cycle_end_time = new_base_time;
end_time = new_base_time;
+ next->correction_active = true;
update_open_gate_duration(next, oper, num_tc,
new_gate_duration);
@@ -1146,6 +1167,7 @@ static int fill_sched_entry(struct taprio_sched *q, struct nlattr **tb,
}
entry->interval = interval;
+ entry->correction_active = false;
return 0;
}
--
2.25.1
next prev parent reply other threads:[~2023-11-07 11:22 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-11-07 11:20 [PATCH v2 net 0/7] qbv cycle time extension/truncation Faizal Rahim
2023-11-07 11:20 ` [PATCH v2 net 1/7] net/sched: taprio: fix too early schedules switching Faizal Rahim
2023-11-08 22:27 ` Vladimir Oltean
2023-11-15 11:54 ` Abdul Rahim, Faizal
2023-11-12 10:31 ` Simon Horman
2023-11-16 5:59 ` Abdul Rahim, Faizal
2023-11-07 11:20 ` [PATCH v2 net 2/7] net/sched: taprio: fix cycle time adjustment for next entry Faizal Rahim
2023-11-08 23:20 ` Vladimir Oltean
2023-11-15 11:55 ` Abdul Rahim, Faizal
2023-11-07 11:20 ` [PATCH v2 net 3/7] net/sched: taprio: update impacted fields during cycle time adjustment Faizal Rahim
2023-11-08 23:41 ` Vladimir Oltean
2023-11-15 11:55 ` Abdul Rahim, Faizal
2023-11-07 11:20 ` Faizal Rahim [this message]
2023-11-07 22:45 ` [PATCH v2 net 4/7] net/sched: taprio: get corrected value of cycle_time and interval kernel test robot
2023-11-09 11:11 ` Vladimir Oltean
2023-11-15 11:55 ` Abdul Rahim, Faizal
2023-11-17 2:36 ` Vinicius Costa Gomes
2023-11-09 12:01 ` Vladimir Oltean
2023-11-10 19:15 ` kernel test robot
2023-11-07 11:20 ` [PATCH v2 net 5/7] net/sched: taprio: fix delayed switching to new schedule after timer expiry Faizal Rahim
2023-11-09 11:50 ` Vladimir Oltean
2023-11-15 11:56 ` Abdul Rahim, Faizal
2023-11-09 12:24 ` Vladimir Oltean
2023-11-07 11:20 ` [PATCH v2 net 6/7] net/sched: taprio: fix q->current_entry is NULL before its expiry Faizal Rahim
2023-11-09 11:55 ` Vladimir Oltean
2023-11-15 11:56 ` Abdul Rahim, Faizal
2023-11-07 11:20 ` [PATCH v2 net 7/7] net/sched: taprio: enable cycle time adjustment for current entry Faizal Rahim
2023-11-09 13:18 ` Vladimir Oltean
2023-11-15 11:57 ` Abdul Rahim, Faizal
2023-11-08 15:51 ` [PATCH v2 net 0/7] qbv cycle time extension/truncation Vladimir Oltean
2023-11-10 11:06 ` Abdul Rahim, Faizal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231107112023.676016-5-faizal.abdul.rahim@linux.intel.com \
--to=faizal.abdul.rahim@linux.intel.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=jhs@mojatatu.com \
--cc=jiri@resnulli.us \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=vinicius.gomes@intel.com \
--cc=vladimir.oltean@nxp.com \
--cc=xiyou.wangcong@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox