[PATCH AUTOSEL 6.6 28/31] gpiolib: acpi: Add a ignore interrupt quirk for Peaq C1010

[Sasha Levin <sashal@kernel.org>]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit 6cc64f6173751d212c9833bde39e856b4f585a3e ]

On the Peaq C1010 2-in-1 INT33FC:00 pin 3 is connected to
a "dolby" button. At the ACPI level an _AEI event-handler
is connected which sets an ACPI variable to 1 on both
edges. This variable can be polled + cleared to 0 using WMI.

Since the variable is set on both edges the WMI interface is pretty
useless even when polling. So instead of writing a custom WMI
driver for this the x86-android-tablets code instantiates
a gpio-keys platform device for the "dolby" button.

Add an ignore_interrupt quirk for INT33FC:00 pin 3 on the Peaq C1010,
so that it is not seen as busy when the gpio-keys driver requests it.

Note this replaces a hack in x86-android-tablets where it would
call acpi_gpiochip_free_interrupts() on the INT33FC:00 GPIO
controller. acpi_gpiochip_free_interrupts() is considered private
(internal) gpiolib API so x86-android-tablets should stop using it.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20230909141816.58358-3-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpio/gpiolib-acpi.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/drivers/gpio/gpiolib-acpi.c b/drivers/gpio/gpiolib-acpi.c
index 51e41676de0b8..5d04720107ef5 100644
--- a/drivers/gpio/gpiolib-acpi.c
+++ b/drivers/gpio/gpiolib-acpi.c
@@ -1655,6 +1655,26 @@ static const struct dmi_system_id gpiolib_acpi_quirks[] __initconst = {
 			.ignore_wake = "SYNA1202:00@16",
 		},
 	},
+	{
+		/*
+		 * On the Peaq C1010 2-in-1 INT33FC:00 pin 3 is connected to
+		 * a "dolby" button. At the ACPI level an _AEI event-handler
+		 * is connected which sets an ACPI variable to 1 on both
+		 * edges. This variable can be polled + cleared to 0 using
+		 * WMI. But since the variable is set on both edges the WMI
+		 * interface is pretty useless even when polling.
+		 * So instead the x86-android-tablets code instantiates
+		 * a gpio-keys platform device for it.
+		 * Ignore the _AEI handler for the pin, so that it is not busy.
+		 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "PEAQ"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "PEAQ PMM C1010 MD99187"),
+		},
+		.driver_data = &(struct acpi_gpiolib_dmi_quirk) {
+			.ignore_interrupt = "INT33FC:00@3",
+		},
+	},
 	{} /* Terminating entry */
 };
 
-- 
2.42.0