From: Delphine CC Chiu <Delphine_CC_Chiu@Wiwynn.com>
To: patrick@stwcx.xyz, Delphine CC Chiu <Delphine_CC_Chiu@Wiwynn.com>,
Jean Delvare <jdelvare@suse.com>,
Guenter Roeck <linux@roeck-us.net>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>,
linux-i2c@vger.kernel.org, linux-hwmon@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-doc@vger.kernel.org
Subject: [PATCH v4 1/2] dt-bindings: hwmon: Add lltc ltc4286 driver bindings
Date: Thu, 9 Nov 2023 09:49:45 +0800 [thread overview]
Message-ID: <20231109014948.2334465-2-Delphine_CC_Chiu@Wiwynn.com> (raw)
In-Reply-To: <20231109014948.2334465-1-Delphine_CC_Chiu@Wiwynn.com>
Add a device tree bindings for ltc4286 device.
Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@Wiwynn.com>
Changelog:
v4 - Revise some inappropriate writing in yaml file
v3 - Revise adi,vrange-select-25p6 to adi,vrange-low-enable
v2 - Revise vrange_select_25p6 to adi,vrange-select-25p6
- Add type for adi,vrange-select-25p6
- Revise rsense-micro-ohms to shunt-resistor-micro-ohms
---
.../bindings/hwmon/lltc,ltc4286.yaml | 51 +++++++++++++++++++
MAINTAINERS | 10 ++++
2 files changed, 61 insertions(+)
create mode 100644 Documentation/devicetree/bindings/hwmon/lltc,ltc4286.yaml
diff --git a/Documentation/devicetree/bindings/hwmon/lltc,ltc4286.yaml b/Documentation/devicetree/bindings/hwmon/lltc,ltc4286.yaml
new file mode 100644
index 000000000000..d26f34fb7ea7
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/lltc,ltc4286.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/lltc,ltc4286.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LTC4286 power monitors
+
+maintainers:
+ - Delphine CC Chiu <Delphine_CC_Chiu@Wiwynn.com>
+
+properties:
+ compatible:
+ enum:
+ - lltc,ltc4286
+ - lltc,ltc4287
+
+ reg:
+ maxItems: 1
+
+ adi,vrange-low-enable:
+ description:
+ This property is a bool parameter to represent the
+ voltage range is 25.6 volts or 102.4 volts for this chip.
+ The default is 102.4 volts.
+ type: boolean
+
+ shunt-resistor-micro-ohms:
+ description:
+ Resistor value micro-ohms.
+
+required:
+ - compatible
+ - reg
+ - shunt-resistor-micro-ohms
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ power-monitor@40 {
+ compatible = "lltc,ltc4286";
+ reg = <0x40>;
+ adi,vrange-low-enable;
+ shunt-resistor-micro-ohms = <300>;
+ };
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index 0b275b8d6bd2..5d439cd64ecb 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -12609,6 +12609,16 @@ S: Maintained
F: Documentation/hwmon/ltc4261.rst
F: drivers/hwmon/ltc4261.c
+LTC4286 HARDWARE MONITOR DRIVER
+M: Delphine CC Chiu <Delphine_CC_Chiu@Wiwynn.com>
+L: linux-i2c@vger.kernel.org
+S: Maintained
+F: Documentation/devicetree/bindings/hwmon/lltc,ltc4286.yaml
+F: Documentation/devicetree/bindings/hwmon/ltc4286.rst
+F: drivers/hwmon/pmbus/Kconfig
+F: drivers/hwmon/pmbus/Makefile
+F: drivers/hwmon/pmbus/ltc4286.c
+
LTC4306 I2C MULTIPLEXER DRIVER
M: Michael Hennerich <michael.hennerich@analog.com>
L: linux-i2c@vger.kernel.org
--
2.25.1
next prev parent reply other threads:[~2023-11-09 1:50 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-11-09 1:49 [PATCH v4 0/2] LTC4286 and LTC4287 driver support Delphine CC Chiu
2023-11-09 1:49 ` Delphine CC Chiu [this message]
2023-11-09 17:09 ` [PATCH v4 1/2] dt-bindings: hwmon: Add lltc ltc4286 driver bindings Conor Dooley
2023-11-15 8:38 ` Delphine_CC_Chiu/WYHQ/Wiwynn
2023-11-15 12:17 ` Krzysztof Kozlowski
2023-11-21 2:27 ` Delphine_CC_Chiu/WYHQ/Wiwynn
2023-11-09 1:49 ` [PATCH v4 2/2] hwmon: pmbus: Add ltc4286 driver Delphine CC Chiu
2023-11-09 17:27 ` Guenter Roeck
2023-11-09 19:50 ` Guenter Roeck
2023-11-15 8:46 ` Delphine_CC_Chiu/WYHQ/Wiwynn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231109014948.2334465-2-Delphine_CC_Chiu@Wiwynn.com \
--to=delphine_cc_chiu@wiwynn.com \
--cc=conor+dt@kernel.org \
--cc=corbet@lwn.net \
--cc=devicetree@vger.kernel.org \
--cc=jdelvare@suse.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=patrick@stwcx.xyz \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox