public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
To: "John W. Linville" <linville@tuxdriver.com>,
	Kalle Valo <kvalo@kernel.org>,
	Larry Finger <Larry.Finger@lwfinger.net>,
	linux-wireless@vger.kernel.org, Ping-Ke Shih <pkshih@realtek.com>,
	Bjorn Helgaas <bhelgaas@google.com>,
	linux-kernel@vger.kernel.org
Cc: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
Subject: [PATCH 6/7] rtlwifi: rtl8821ae: Add pdev into _rtl8821ae_clear_pci_pme_status()
Date: Fri, 17 Nov 2023 11:44:24 +0200	[thread overview]
Message-ID: <20231117094425.80477-7-ilpo.jarvinen@linux.intel.com> (raw)
In-Reply-To: <20231117094425.80477-1-ilpo.jarvinen@linux.intel.com>

Add local variable pdev to shorten rtlpci->pdev.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
---
 drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c
index 7877509c34c7..7cc648d49f2d 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c
@@ -2270,10 +2270,11 @@ static void _rtl8821ae_clear_pci_pme_status(struct ieee80211_hw *hw)
 {
 	struct rtl_priv *rtlpriv = rtl_priv(hw);
 	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+	struct pci_dev *pdev = rtlpci->pdev;
 	u8 pmcs_reg;
 	u8 pm_cap;
 
-	pm_cap = pci_find_capability(rtlpci->pdev, PCI_CAP_ID_PM);
+	pm_cap = pci_find_capability(pdev, PCI_CAP_ID_PM);
 	if (!pm_cap) {
 		rtl_dbg(rtlpriv, COMP_INIT, DBG_WARNING,
 			"Cannot find PME Capability\n");
@@ -2283,13 +2284,13 @@ static void _rtl8821ae_clear_pci_pme_status(struct ieee80211_hw *hw)
 	/* Get the PM CSR (Control/Status Register),
 	 * The PME_Status is located at PM Capatibility offset 5, bit 7
 	 */
-	pci_read_config_byte(rtlpci->pdev, pm_cap + 5, &pmcs_reg);
+	pci_read_config_byte(pdev, pm_cap + 5, &pmcs_reg);
 
 	if (pmcs_reg & BIT(7)) {
 		/* Clear PME_Status with write */
-		pci_write_config_byte(rtlpci->pdev, pm_cap + 5, pmcs_reg);
+		pci_write_config_byte(pdev, pm_cap + 5, pmcs_reg);
 		/* Read it back to check */
-		pci_read_config_byte(rtlpci->pdev, pm_cap + 5, &pmcs_reg);
+		pci_read_config_byte(pdev, pm_cap + 5, &pmcs_reg);
 		rtl_dbg(rtlpriv, COMP_INIT, DBG_DMESG,
 			"Clear PME status 0x%2x to 0x%2x\n",
 			pm_cap + 5, pmcs_reg);
-- 
2.30.2


  parent reply	other threads:[~2023-11-17  9:48 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-11-17  9:44 [PATCH 0/7] rtlwifi: PCIe capability access fix + improvements Ilpo Järvinen
2023-11-17  9:44 ` [PATCH 1/7] wifi: rtlwifi: Convert LNKCTL change to PCIe cap RMW accessors Ilpo Järvinen
2023-11-17 22:24   ` Bjorn Helgaas
2023-11-20  9:25     ` Ilpo Järvinen
2023-11-22 14:54   ` Kalle Valo
2023-11-17  9:44 ` [PATCH 2/7] wifi: rtlwifi: Convert to use PCIe capability accessors Ilpo Järvinen
2023-11-17 22:37   ` Bjorn Helgaas
2023-11-20  8:54     ` Ilpo Järvinen
2023-11-17  9:44 ` [PATCH 3/7] rtlwifi: rtl8821ae: Remove unnecessary PME_Status bit set Ilpo Järvinen
2023-11-17  9:44 ` [PATCH 4/7] rtlwifi: rtl8821ae: Reverse PM capability exists check Ilpo Järvinen
2023-11-17 22:44   ` Bjorn Helgaas
2023-11-20  9:59     ` Ilpo Järvinen
2023-11-17  9:44 ` [PATCH 5/7] rtlwifi: rtl8821ae: Use pci_find_capability() Ilpo Järvinen
2023-11-17 22:46   ` Bjorn Helgaas
2023-11-17  9:44 ` Ilpo Järvinen [this message]
2023-11-17  9:44 ` [PATCH 7/7] rtlwifi: rtl8821ae: Access full PMCS reg and use pci_regs.h Ilpo Järvinen
2023-11-17 22:48   ` Bjorn Helgaas
2023-11-20 10:06     ` Ilpo Järvinen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20231117094425.80477-7-ilpo.jarvinen@linux.intel.com \
    --to=ilpo.jarvinen@linux.intel.com \
    --cc=Larry.Finger@lwfinger.net \
    --cc=bhelgaas@google.com \
    --cc=kvalo@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=linville@tuxdriver.com \
    --cc=pkshih@realtek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox