[PATCH 11/13] x86/CPU/AMD: Get rid of amd_erratum_400[]

[Borislav Petkov <bp@alien8.de>]

From: "Borislav Petkov (AMD)" <bp@alien8.de>

Setting X86_BUG_AMD_E400 in init_amd() is early enough.

No functional changes.

Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
---
 arch/x86/kernel/cpu/amd.c | 33 ++++++++++++++++++++-------------
 1 file changed, 20 insertions(+), 13 deletions(-)

diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
index 3e25fa9c5275..f913ca245639 100644
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -59,10 +59,6 @@ static u32 nodes_per_socket = 1;
 #define AMD_MODEL_RANGE_START(range)	(((range) >> 12) & 0xfff)
 #define AMD_MODEL_RANGE_END(range)	((range) & 0xfff)
 
-static const int amd_erratum_400[] =
-	AMD_OSVW_ERRATUM(1, AMD_MODEL_RANGE(0xf, 0x41, 0x2, 0xff, 0xf),
-			    AMD_MODEL_RANGE(0x10, 0x2, 0x1, 0xff, 0xf));
-
 static const int amd_erratum_1485[] =
 	AMD_LEGACY_ERRATUM(AMD_MODEL_RANGE(0x19, 0x10, 0x0, 0x1f, 0xf),
 			   AMD_MODEL_RANGE(0x19, 0x60, 0x0, 0xaf, 0xf));
@@ -765,15 +761,6 @@ static void early_init_amd(struct cpuinfo_x86 *c)
 	if (c->x86 == 0x16 && c->x86_model <= 0xf)
 		msr_set_bit(MSR_AMD64_LS_CFG, 15);
 
-	/*
-	 * Check whether the machine is affected by erratum 400. This is
-	 * used to select the proper idle routine and to enable the check
-	 * whether the machine is affected in arch_post_acpi_init(), which
-	 * sets the X86_BUG_AMD_APIC_C1E bug depending on the MSR check.
-	 */
-	if (cpu_has_amd_erratum(c, amd_erratum_400))
-		set_cpu_bug(c, X86_BUG_AMD_E400);
-
 	early_detect_mem_encrypt(c);
 
 	/* Re-enable TopologyExtensions if switched off by BIOS */
@@ -840,6 +827,16 @@ static void init_amd_k8(struct cpuinfo_x86 *c)
 	msr_set_bit(MSR_K7_HWCR, 6);
 #endif
 	set_cpu_bug(c, X86_BUG_SWAPGS_FENCE);
+
+	/*
+	 * Check models and steppings affected by erratum 400. This is
+	 * used to select the proper idle routine and to enable the
+	 * check whether the machine is affected in arch_post_acpi_subsys_init()
+	 * which sets the X86_BUG_AMD_APIC_C1E bug depending on the MSR check.
+	 */
+	if (c->x86_model > 0x41 ||
+	    (c->x86_model == 0x41 && c->x86_stepping >= 0x2))
+		setup_force_cpu_bug(X86_BUG_AMD_E400);
 }
 
 static void init_amd_gh(struct cpuinfo_x86 *c)
@@ -874,6 +871,16 @@ static void init_amd_gh(struct cpuinfo_x86 *c)
 	msr_clear_bit(MSR_AMD64_BU_CFG2, 24);
 
 	set_cpu_bug(c, X86_BUG_AMD_TLB_MMATCH);
+
+	/*
+	 * Check models and steppings affected by erratum 400. This is
+	 * used to select the proper idle routine and to enable the
+	 * check whether the machine is affected in arch_post_acpi_subsys_init()
+	 * which sets the X86_BUG_AMD_APIC_C1E bug depending on the MSR check.
+	 */
+	if (c->x86_model > 0x2 ||
+	    (c->x86_model == 0x2 && c->x86_stepping >= 0x1))
+		setup_force_cpu_bug(X86_BUG_AMD_E400);
 }
 
 static void init_amd_ln(struct cpuinfo_x86 *c)
-- 
2.42.0.rc0.25.ga82fb66fed25