From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Mario Limonciello <mario.limonciello@amd.com>,
Jarkko Nikula <jarkko.nikula@linux.intel.com>,
Herbert Xu <herbert@gondor.apana.org.au>,
Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
Wolfram Sang <wsa@kernel.org>,
linux-i2c@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>,
Jan Dabros <jsd@semihalf.com>, Andi Shyti <andi.shyti@kernel.org>,
Philipp Zabel <p.zabel@pengutronix.de>
Subject: [PATCH v4 14/24] i2c: designware: Consolidate firmware parsing and configuring code
Date: Mon, 20 Nov 2023 16:41:56 +0200 [thread overview]
Message-ID: <20231120144641.1660574-15-andriy.shevchenko@linux.intel.com> (raw)
In-Reply-To: <20231120144641.1660574-1-andriy.shevchenko@linux.intel.com>
We have the same code flows in the PCI and plaform drivers. Moreover,
the flow requires the common code to export a few functions. Instead,
consolidate that flow under new function called
i2c_dw_fw_parse_and_configure() and drop unneeded exports.
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
drivers/i2c/busses/i2c-designware-common.c | 68 +++++++++++++++++++--
drivers/i2c/busses/i2c-designware-core.h | 9 +--
drivers/i2c/busses/i2c-designware-pcidrv.c | 11 +---
drivers/i2c/busses/i2c-designware-platdrv.c | 48 +--------------
4 files changed, 66 insertions(+), 70 deletions(-)
diff --git a/drivers/i2c/busses/i2c-designware-common.c b/drivers/i2c/busses/i2c-designware-common.c
index 7a53a732981b..d3ddfec46200 100644
--- a/drivers/i2c/busses/i2c-designware-common.c
+++ b/drivers/i2c/busses/i2c-designware-common.c
@@ -20,6 +20,7 @@
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/of.h>
#include <linux/pm_runtime.h>
#include <linux/regmap.h>
#include <linux/swab.h>
@@ -188,7 +189,7 @@ static const u32 supported_speeds[] = {
I2C_MAX_STANDARD_MODE_FREQ,
};
-int i2c_dw_validate_speed(struct dw_i2c_dev *dev)
+static int i2c_dw_validate_speed(struct dw_i2c_dev *dev)
{
struct i2c_timings *t = &dev->timings;
unsigned int i;
@@ -208,7 +209,44 @@ int i2c_dw_validate_speed(struct dw_i2c_dev *dev)
return -EINVAL;
}
-EXPORT_SYMBOL_GPL(i2c_dw_validate_speed);
+
+#ifdef CONFIG_OF
+
+#include <linux/platform_device.h>
+
+#define MSCC_ICPU_CFG_TWI_DELAY 0x0
+#define MSCC_ICPU_CFG_TWI_DELAY_ENABLE BIT(0)
+#define MSCC_ICPU_CFG_TWI_SPIKE_FILTER 0x4
+
+static int mscc_twi_set_sda_hold_time(struct dw_i2c_dev *dev)
+{
+ writel((dev->sda_hold_time << 1) | MSCC_ICPU_CFG_TWI_DELAY_ENABLE,
+ dev->ext + MSCC_ICPU_CFG_TWI_DELAY);
+
+ return 0;
+}
+
+static void i2c_dw_of_configure(struct device *device)
+{
+ struct platform_device *pdev = to_platform_device(device);
+ struct dw_i2c_dev *dev = dev_get_drvdata(device);
+
+ switch (dev->flags & MODEL_MASK) {
+ case MODEL_MSCC_OCELOT:
+ dev->ext = devm_platform_ioremap_resource(pdev, 1);
+ if (!IS_ERR(dev->ext))
+ dev->set_sda_hold_time = mscc_twi_set_sda_hold_time;
+ break;
+ default:
+ break;
+ }
+}
+
+#else /* CONFIG_OF */
+
+static inline void i2c_dw_of_configure(struct device *device) { }
+
+#endif /* CONFIG_OF */
#ifdef CONFIG_ACPI
@@ -255,7 +293,7 @@ static void i2c_dw_acpi_params(struct device *device, char method[],
kfree(buf.pointer);
}
-void i2c_dw_acpi_configure(struct device *device)
+static void i2c_dw_acpi_configure(struct device *device)
{
struct dw_i2c_dev *dev = dev_get_drvdata(device);
struct i2c_timings *t = &dev->timings;
@@ -286,7 +324,6 @@ void i2c_dw_acpi_configure(struct device *device)
break;
}
}
-EXPORT_SYMBOL_GPL(i2c_dw_acpi_configure);
static u32 i2c_dw_acpi_round_bus_speed(struct device *device)
{
@@ -308,11 +345,13 @@ static u32 i2c_dw_acpi_round_bus_speed(struct device *device)
#else /* CONFIG_ACPI */
+static inline void i2c_dw_acpi_configure(struct device *device) { }
+
static inline u32 i2c_dw_acpi_round_bus_speed(struct device *device) { return 0; }
#endif /* CONFIG_ACPI */
-void i2c_dw_adjust_bus_speed(struct dw_i2c_dev *dev)
+static void i2c_dw_adjust_bus_speed(struct dw_i2c_dev *dev)
{
u32 acpi_speed = i2c_dw_acpi_round_bus_speed(dev->dev);
struct i2c_timings *t = &dev->timings;
@@ -328,7 +367,24 @@ void i2c_dw_adjust_bus_speed(struct dw_i2c_dev *dev)
else
t->bus_freq_hz = I2C_MAX_FAST_MODE_FREQ;
}
-EXPORT_SYMBOL_GPL(i2c_dw_adjust_bus_speed);
+
+int i2c_dw_fw_parse_and_configure(struct dw_i2c_dev *dev)
+{
+ struct i2c_timings *t = &dev->timings;
+ struct device *device = dev->dev;
+
+ i2c_parse_fw_timings(device, t, false);
+
+ i2c_dw_adjust_bus_speed(dev);
+
+ if (device->of_node)
+ i2c_dw_of_configure(device);
+ if (has_acpi_companion(device))
+ i2c_dw_acpi_configure(device);
+
+ return i2c_dw_validate_speed(dev);
+}
+EXPORT_SYMBOL_GPL(i2c_dw_fw_parse_and_configure);
u32 i2c_dw_scl_hcnt(u32 ic_clk, u32 tSYMBOL, u32 tf, int cond, int offset)
{
diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h
index b7884f15e0e9..22477143bb98 100644
--- a/drivers/i2c/busses/i2c-designware-core.h
+++ b/drivers/i2c/busses/i2c-designware-core.h
@@ -395,11 +395,4 @@ int i2c_dw_baytrail_probe_lock_support(struct dw_i2c_dev *dev);
int i2c_dw_amdpsp_probe_lock_support(struct dw_i2c_dev *dev);
#endif
-int i2c_dw_validate_speed(struct dw_i2c_dev *dev);
-void i2c_dw_adjust_bus_speed(struct dw_i2c_dev *dev);
-
-#if IS_ENABLED(CONFIG_ACPI)
-void i2c_dw_acpi_configure(struct device *device);
-#else
-static inline void i2c_dw_acpi_configure(struct device *device) { }
-#endif
+int i2c_dw_fw_parse_and_configure(struct dw_i2c_dev *dev);
diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c
index cf736a8b9023..7556e9cbf8d2 100644
--- a/drivers/i2c/busses/i2c-designware-pcidrv.c
+++ b/drivers/i2c/busses/i2c-designware-pcidrv.c
@@ -253,7 +253,6 @@ static int i2c_dw_pci_probe(struct pci_dev *pdev,
int r;
struct dw_pci_controller *controller;
struct dw_scl_sda_cfg *cfg;
- struct i2c_timings *t;
if (id->driver_data >= ARRAY_SIZE(dw_pci_controllers))
return dev_err_probe(&pdev->dev, -EINVAL,
@@ -288,9 +287,6 @@ static int i2c_dw_pci_probe(struct pci_dev *pdev,
dev->irq = pci_irq_vector(pdev, 0);
dev->flags |= controller->flags;
- t = &dev->timings;
- i2c_parse_fw_timings(&pdev->dev, t, false);
-
pci_set_drvdata(pdev, dev);
if (controller->setup) {
@@ -299,12 +295,7 @@ static int i2c_dw_pci_probe(struct pci_dev *pdev,
return r;
}
- i2c_dw_adjust_bus_speed(dev);
-
- if (has_acpi_companion(&pdev->dev))
- i2c_dw_acpi_configure(&pdev->dev);
-
- r = i2c_dw_validate_speed(dev);
+ r = i2c_dw_fw_parse_and_configure(dev);
if (r)
return r;
diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index b8606b651feb..b275a1b19eec 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -21,7 +21,6 @@
#include <linux/kernel.h>
#include <linux/mfd/syscon.h>
#include <linux/module.h>
-#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/pm.h>
#include <linux/pm_runtime.h>
@@ -97,43 +96,11 @@ static int bt1_i2c_request_regs(struct dw_i2c_dev *dev)
dev->map = devm_regmap_init(dev->dev, NULL, dev, &bt1_i2c_cfg);
return PTR_ERR_OR_ZERO(dev->map);
}
-
-#define MSCC_ICPU_CFG_TWI_DELAY 0x0
-#define MSCC_ICPU_CFG_TWI_DELAY_ENABLE BIT(0)
-#define MSCC_ICPU_CFG_TWI_SPIKE_FILTER 0x4
-
-static int mscc_twi_set_sda_hold_time(struct dw_i2c_dev *dev)
-{
- writel((dev->sda_hold_time << 1) | MSCC_ICPU_CFG_TWI_DELAY_ENABLE,
- dev->ext + MSCC_ICPU_CFG_TWI_DELAY);
-
- return 0;
-}
-
-static void i2c_dw_of_configure(struct device *device)
-{
- struct platform_device *pdev = to_platform_device(device);
- struct dw_i2c_dev *dev = dev_get_drvdata(device);
-
- switch (dev->flags & MODEL_MASK) {
- case MODEL_MSCC_OCELOT:
- dev->ext = devm_platform_ioremap_resource(pdev, 1);
- if (!IS_ERR(dev->ext))
- dev->set_sda_hold_time = mscc_twi_set_sda_hold_time;
- break;
- default:
- break;
- }
-}
#else
static int bt1_i2c_request_regs(struct dw_i2c_dev *dev)
{
return -ENODEV;
}
-
-static inline void i2c_dw_of_configure(struct device *device)
-{
-}
#endif
static int txgbe_i2c_request_regs(struct dw_i2c_dev *dev)
@@ -274,7 +241,6 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
{
struct i2c_adapter *adap;
struct dw_i2c_dev *dev;
- struct i2c_timings *t;
int irq, ret;
irq = platform_get_irq(pdev, 0);
@@ -301,18 +267,7 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
if (ret)
return ret;
- t = &dev->timings;
- i2c_parse_fw_timings(&pdev->dev, t, false);
-
- i2c_dw_adjust_bus_speed(dev);
-
- if (pdev->dev.of_node)
- i2c_dw_of_configure(&pdev->dev);
-
- if (has_acpi_companion(&pdev->dev))
- i2c_dw_acpi_configure(&pdev->dev);
-
- ret = i2c_dw_validate_speed(dev);
+ ret = i2c_dw_fw_parse_and_configure(dev);
if (ret)
return ret;
@@ -336,6 +291,7 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
return ret;
if (dev->clk) {
+ struct i2c_timings *t = &dev->timings;
u64 clk_khz;
dev->get_clk_rate_khz = i2c_dw_get_clk_rate_khz;
--
2.43.0.rc1.1.gbec44491f096
next prev parent reply other threads:[~2023-11-20 14:47 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-11-20 14:41 [PATCH v4 00/24] i2c: designware: code consolidation & cleanups Andy Shevchenko
2023-11-20 14:41 ` [PATCH v4 01/24] i2c: designware: Fix PM calls order in dw_i2c_plat_probe() Andy Shevchenko
2023-11-26 21:48 ` Andi Shyti
2023-11-20 14:41 ` [PATCH v4 02/24] i2c: designware: Fix reset call " Andy Shevchenko
2023-11-26 21:57 ` Andi Shyti
2023-11-20 14:41 ` [PATCH v4 03/24] i2c: designware: Let PCI core to take care about interrupt vectors Andy Shevchenko
2023-11-26 22:03 ` Andi Shyti
2023-11-20 14:41 ` [PATCH v4 04/24] i2c: designware: Fix lock probe call order in dw_i2c_plat_probe() Andy Shevchenko
2023-11-26 22:23 ` Andi Shyti
2023-11-20 14:41 ` [PATCH v4 05/24] i2c: designware: Replace a while-loop by for-loop Andy Shevchenko
2023-11-26 22:27 ` Andi Shyti
2023-11-20 14:41 ` [PATCH v4 06/24] i2c: designware: Save pointer to semaphore callbacks instead of index Andy Shevchenko
2023-11-26 22:38 ` Andi Shyti
2023-11-20 14:41 ` [PATCH v4 07/24] i2c: designware: Add missing 'c' into PCI IDs variable name Andy Shevchenko
2023-11-27 23:54 ` Andi Shyti
2023-11-20 14:41 ` [PATCH v4 08/24] i2c: designware: Replace MODULE_ALIAS() with MODULE_DEVICE_TABLE() Andy Shevchenko
2023-11-20 14:41 ` [PATCH v4 09/24] i2c: designware: Unify terminator in device ID tables Andy Shevchenko
2023-11-27 23:56 ` Andi Shyti
2023-11-20 14:41 ` [PATCH v4 10/24] i2c: designware: Always provide " Andy Shevchenko
2023-11-20 14:41 ` [PATCH v4 11/24] i2c: designware: Drop return value from i2c_dw_acpi_configure() Andy Shevchenko
2023-11-20 14:41 ` [PATCH v4 12/24] i2c: designware: Drop return value from dw_i2c_of_configure() Andy Shevchenko
2023-11-20 14:41 ` [PATCH v4 13/24] i2c: designware: Rename dw_i2c_of_configure() -> i2c_dw_of_configure() Andy Shevchenko
2023-11-20 14:41 ` Andy Shevchenko [this message]
2023-11-20 14:41 ` [PATCH v4 15/24] i2c: designware: Unify the firmware type checks Andy Shevchenko
2023-11-20 14:41 ` [PATCH v4 16/24] i2c: designware: Move exports to I2C_DW namespaces Andy Shevchenko
2023-11-28 17:48 ` Andi Shyti
2023-11-20 14:41 ` [PATCH v4 17/24] i2c: designware: Remove ->disable() callback Andy Shevchenko
2023-11-29 0:47 ` Andi Shyti
2023-11-20 14:42 ` [PATCH v4 18/24] i2c: designware: Consolidate PM ops Andy Shevchenko
2023-11-29 23:08 ` Andi Shyti
2023-11-20 14:42 ` [PATCH v4 19/24] i2c: designware: Uninline i2c_dw_probe() Andy Shevchenko
2023-11-29 23:21 ` Andi Shyti
2023-11-30 13:28 ` Andy Shevchenko
2023-12-03 22:06 ` Andi Shyti
2023-11-20 14:42 ` [PATCH v4 20/24] i2c: designware: Propagate firmware node Andy Shevchenko
2023-11-29 23:09 ` Andi Shyti
2023-11-20 14:42 ` [PATCH v4 21/24] i2c: designware: Use pci_get_drvdata() Andy Shevchenko
2023-11-29 23:10 ` Andi Shyti
2023-11-20 14:42 ` [PATCH v4 22/24] i2c: designware: Use temporary variable for struct device Andy Shevchenko
2023-11-29 23:12 ` Andi Shyti
2023-11-20 14:42 ` [PATCH v4 23/24] i2c: designware: Get rid of redundant 'else' Andy Shevchenko
2023-11-20 14:42 ` [PATCH v4 24/24] i2c: designware: Fix spelling and other issues in the comments Andy Shevchenko
2023-11-29 23:20 ` Andi Shyti
2023-11-21 14:30 ` [PATCH v4 00/24] i2c: designware: code consolidation & cleanups Jarkko Nikula
2023-11-21 16:08 ` Serge Semin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231120144641.1660574-15-andriy.shevchenko@linux.intel.com \
--to=andriy.shevchenko@linux.intel.com \
--cc=andi.shyti@kernel.org \
--cc=herbert@gondor.apana.org.au \
--cc=jarkko.nikula@linux.intel.com \
--cc=jsd@semihalf.com \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mario.limonciello@amd.com \
--cc=mika.westerberg@linux.intel.com \
--cc=p.zabel@pengutronix.de \
--cc=wsa@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox