From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Mario Limonciello <mario.limonciello@amd.com>,
Jarkko Nikula <jarkko.nikula@linux.intel.com>,
Herbert Xu <herbert@gondor.apana.org.au>,
Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
Wolfram Sang <wsa@kernel.org>,
linux-i2c@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>,
Jan Dabros <jsd@semihalf.com>, Andi Shyti <andi.shyti@kernel.org>,
Philipp Zabel <p.zabel@pengutronix.de>
Subject: [PATCH v4 17/24] i2c: designware: Remove ->disable() callback
Date: Mon, 20 Nov 2023 16:41:59 +0200 [thread overview]
Message-ID: <20231120144641.1660574-18-andriy.shevchenko@linux.intel.com> (raw)
In-Reply-To: <20231120144641.1660574-1-andriy.shevchenko@linux.intel.com>
Commit 90312351fd1e ("i2c: designware: MASTER mode as separated driver")
introduced ->disable() callback but there is no real use for it. Both
i2c-designware-master.c and i2c-designware-slave.c set it to the same
i2c_dw_disable() and scope is inside the same kernel module.
That said, replace the callback by explicitly calling the i2c_dw_disable().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
drivers/i2c/busses/i2c-designware-common.c | 1 +
drivers/i2c/busses/i2c-designware-core.h | 2 --
drivers/i2c/busses/i2c-designware-master.c | 1 -
drivers/i2c/busses/i2c-designware-pcidrv.c | 5 +++--
drivers/i2c/busses/i2c-designware-platdrv.c | 4 ++--
drivers/i2c/busses/i2c-designware-slave.c | 3 +--
6 files changed, 7 insertions(+), 9 deletions(-)
diff --git a/drivers/i2c/busses/i2c-designware-common.c b/drivers/i2c/busses/i2c-designware-common.c
index 89b8fa492e26..5b1a597cb5dd 100644
--- a/drivers/i2c/busses/i2c-designware-common.c
+++ b/drivers/i2c/busses/i2c-designware-common.c
@@ -711,6 +711,7 @@ void i2c_dw_disable(struct dw_i2c_dev *dev)
i2c_dw_release_lock(dev);
}
+EXPORT_SYMBOL_GPL(i2c_dw_disable);
MODULE_DESCRIPTION("Synopsys DesignWare I2C bus adapter core");
MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h
index 22477143bb98..52667d670363 100644
--- a/drivers/i2c/busses/i2c-designware-core.h
+++ b/drivers/i2c/busses/i2c-designware-core.h
@@ -238,7 +238,6 @@ struct i2c_dw_semaphore_callbacks;
* @semaphore_idx: Index of table with semaphore type attached to the bus. It's
* -1 if there is no semaphore.
* @shared_with_punit: true if this bus is shared with the SoCs PUNIT
- * @disable: function to disable the controller
* @init: function to initialize the I2C hardware
* @set_sda_hold_time: callback to retrieve IP specific SDA hold timing
* @mode: operation mode - DW_IC_MASTER or DW_IC_SLAVE
@@ -295,7 +294,6 @@ struct dw_i2c_dev {
void (*release_lock)(void);
const struct i2c_dw_semaphore_callbacks *semaphore_cb;
bool shared_with_punit;
- void (*disable)(struct dw_i2c_dev *dev);
int (*init)(struct dw_i2c_dev *dev);
int (*set_sda_hold_time)(struct dw_i2c_dev *dev);
int mode;
diff --git a/drivers/i2c/busses/i2c-designware-master.c b/drivers/i2c/busses/i2c-designware-master.c
index 0b6576d7f811..bd3c8db521de 100644
--- a/drivers/i2c/busses/i2c-designware-master.c
+++ b/drivers/i2c/busses/i2c-designware-master.c
@@ -990,7 +990,6 @@ int i2c_dw_probe_master(struct dw_i2c_dev *dev)
init_completion(&dev->cmd_complete);
dev->init = i2c_dw_init_master;
- dev->disable = i2c_dw_disable;
ret = i2c_dw_init_regmap(dev);
if (ret)
diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c
index a40acc3d9288..20571812d150 100644
--- a/drivers/i2c/busses/i2c-designware-pcidrv.c
+++ b/drivers/i2c/busses/i2c-designware-pcidrv.c
@@ -198,7 +198,7 @@ static int __maybe_unused i2c_dw_pci_runtime_suspend(struct device *dev)
{
struct dw_i2c_dev *i_dev = dev_get_drvdata(dev);
- i_dev->disable(i_dev);
+ i2c_dw_disable(i_dev);
return 0;
}
@@ -339,7 +339,8 @@ static void i2c_dw_pci_remove(struct pci_dev *pdev)
{
struct dw_i2c_dev *dev = pci_get_drvdata(pdev);
- dev->disable(dev);
+ i2c_dw_disable(dev);
+
pm_runtime_forbid(&pdev->dev);
pm_runtime_get_noresume(&pdev->dev);
diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index 6b1a26afc278..9b249d27841d 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -343,7 +343,7 @@ static void dw_i2c_plat_remove(struct platform_device *pdev)
i2c_del_adapter(&dev->adapter);
- dev->disable(dev);
+ i2c_dw_disable(dev);
pm_runtime_dont_use_autosuspend(&pdev->dev);
pm_runtime_put_sync(&pdev->dev);
@@ -367,7 +367,7 @@ static int dw_i2c_plat_runtime_suspend(struct device *dev)
if (i_dev->shared_with_punit)
return 0;
- i_dev->disable(i_dev);
+ i2c_dw_disable(i_dev);
i2c_dw_prepare_clk(i_dev, false);
return 0;
diff --git a/drivers/i2c/busses/i2c-designware-slave.c b/drivers/i2c/busses/i2c-designware-slave.c
index 70d183fa3bff..5abd5ec41954 100644
--- a/drivers/i2c/busses/i2c-designware-slave.c
+++ b/drivers/i2c/busses/i2c-designware-slave.c
@@ -90,7 +90,7 @@ static int i2c_dw_unreg_slave(struct i2c_client *slave)
struct dw_i2c_dev *dev = i2c_get_adapdata(slave->adapter);
regmap_write(dev->map, DW_IC_INTR_MASK, 0);
- dev->disable(dev);
+ i2c_dw_disable(dev);
synchronize_irq(dev->irq);
dev->slave = NULL;
pm_runtime_put(dev->dev);
@@ -237,7 +237,6 @@ int i2c_dw_probe_slave(struct dw_i2c_dev *dev)
int ret;
dev->init = i2c_dw_init_slave;
- dev->disable = i2c_dw_disable;
ret = i2c_dw_init_regmap(dev);
if (ret)
--
2.43.0.rc1.1.gbec44491f096
next prev parent reply other threads:[~2023-11-20 14:48 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-11-20 14:41 [PATCH v4 00/24] i2c: designware: code consolidation & cleanups Andy Shevchenko
2023-11-20 14:41 ` [PATCH v4 01/24] i2c: designware: Fix PM calls order in dw_i2c_plat_probe() Andy Shevchenko
2023-11-26 21:48 ` Andi Shyti
2023-11-20 14:41 ` [PATCH v4 02/24] i2c: designware: Fix reset call " Andy Shevchenko
2023-11-26 21:57 ` Andi Shyti
2023-11-20 14:41 ` [PATCH v4 03/24] i2c: designware: Let PCI core to take care about interrupt vectors Andy Shevchenko
2023-11-26 22:03 ` Andi Shyti
2023-11-20 14:41 ` [PATCH v4 04/24] i2c: designware: Fix lock probe call order in dw_i2c_plat_probe() Andy Shevchenko
2023-11-26 22:23 ` Andi Shyti
2023-11-20 14:41 ` [PATCH v4 05/24] i2c: designware: Replace a while-loop by for-loop Andy Shevchenko
2023-11-26 22:27 ` Andi Shyti
2023-11-20 14:41 ` [PATCH v4 06/24] i2c: designware: Save pointer to semaphore callbacks instead of index Andy Shevchenko
2023-11-26 22:38 ` Andi Shyti
2023-11-20 14:41 ` [PATCH v4 07/24] i2c: designware: Add missing 'c' into PCI IDs variable name Andy Shevchenko
2023-11-27 23:54 ` Andi Shyti
2023-11-20 14:41 ` [PATCH v4 08/24] i2c: designware: Replace MODULE_ALIAS() with MODULE_DEVICE_TABLE() Andy Shevchenko
2023-11-20 14:41 ` [PATCH v4 09/24] i2c: designware: Unify terminator in device ID tables Andy Shevchenko
2023-11-27 23:56 ` Andi Shyti
2023-11-20 14:41 ` [PATCH v4 10/24] i2c: designware: Always provide " Andy Shevchenko
2023-11-20 14:41 ` [PATCH v4 11/24] i2c: designware: Drop return value from i2c_dw_acpi_configure() Andy Shevchenko
2023-11-20 14:41 ` [PATCH v4 12/24] i2c: designware: Drop return value from dw_i2c_of_configure() Andy Shevchenko
2023-11-20 14:41 ` [PATCH v4 13/24] i2c: designware: Rename dw_i2c_of_configure() -> i2c_dw_of_configure() Andy Shevchenko
2023-11-20 14:41 ` [PATCH v4 14/24] i2c: designware: Consolidate firmware parsing and configuring code Andy Shevchenko
2023-11-20 14:41 ` [PATCH v4 15/24] i2c: designware: Unify the firmware type checks Andy Shevchenko
2023-11-20 14:41 ` [PATCH v4 16/24] i2c: designware: Move exports to I2C_DW namespaces Andy Shevchenko
2023-11-28 17:48 ` Andi Shyti
2023-11-20 14:41 ` Andy Shevchenko [this message]
2023-11-29 0:47 ` [PATCH v4 17/24] i2c: designware: Remove ->disable() callback Andi Shyti
2023-11-20 14:42 ` [PATCH v4 18/24] i2c: designware: Consolidate PM ops Andy Shevchenko
2023-11-29 23:08 ` Andi Shyti
2023-11-20 14:42 ` [PATCH v4 19/24] i2c: designware: Uninline i2c_dw_probe() Andy Shevchenko
2023-11-29 23:21 ` Andi Shyti
2023-11-30 13:28 ` Andy Shevchenko
2023-12-03 22:06 ` Andi Shyti
2023-11-20 14:42 ` [PATCH v4 20/24] i2c: designware: Propagate firmware node Andy Shevchenko
2023-11-29 23:09 ` Andi Shyti
2023-11-20 14:42 ` [PATCH v4 21/24] i2c: designware: Use pci_get_drvdata() Andy Shevchenko
2023-11-29 23:10 ` Andi Shyti
2023-11-20 14:42 ` [PATCH v4 22/24] i2c: designware: Use temporary variable for struct device Andy Shevchenko
2023-11-29 23:12 ` Andi Shyti
2023-11-20 14:42 ` [PATCH v4 23/24] i2c: designware: Get rid of redundant 'else' Andy Shevchenko
2023-11-20 14:42 ` [PATCH v4 24/24] i2c: designware: Fix spelling and other issues in the comments Andy Shevchenko
2023-11-29 23:20 ` Andi Shyti
2023-11-21 14:30 ` [PATCH v4 00/24] i2c: designware: code consolidation & cleanups Jarkko Nikula
2023-11-21 16:08 ` Serge Semin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231120144641.1660574-18-andriy.shevchenko@linux.intel.com \
--to=andriy.shevchenko@linux.intel.com \
--cc=andi.shyti@kernel.org \
--cc=herbert@gondor.apana.org.au \
--cc=jarkko.nikula@linux.intel.com \
--cc=jsd@semihalf.com \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mario.limonciello@amd.com \
--cc=mika.westerberg@linux.intel.com \
--cc=p.zabel@pengutronix.de \
--cc=wsa@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox