public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Boris Brezillon <boris.brezillon@collabora.com>
To: AngeloGioacchino Del Regno  <angelogioacchino.delregno@collabora.com>
Cc: robh@kernel.org, steven.price@arm.com,
	maarten.lankhorst@linux.intel.com, mripard@kernel.org,
	tzimmermann@suse.de, airlied@gmail.com, daniel@ffwll.ch,
	dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org,
	kernel@collabora.com, m.szyprowski@samsung.com,
	krzysztof.kozlowski@linaro.org
Subject: Re: [PATCH v2 3/3] drm/panfrost: Synchronize and disable interrupts before powering off
Date: Tue, 28 Nov 2023 15:06:12 +0100	[thread overview]
Message-ID: <20231128150612.17f6a095@collabora.com> (raw)
In-Reply-To: <20231128124510.391007-4-angelogioacchino.delregno@collabora.com>

On Tue, 28 Nov 2023 13:45:10 +0100
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
wrote:

> To make sure that we don't unintentionally perform any unclocked and/or
> unpowered R/W operation on GPU registers, before turning off clocks and
> regulators we must make sure that no GPU, JOB or MMU ISR execution is
> pending: doing that required to add a mechanism to synchronize the
> interrupts on suspend.
> 
> Add functions panfrost_{gpu,job,mmu}_suspend_irq() which will perform
> interrupts masking and ISR execution synchronization, and then call
> those in the panfrost_device_runtime_suspend() handler in the exact
> sequence of job (may require mmu!) -> mmu -> gpu.
> 
> As a side note, JOB and MMU suspend_irq functions needed some special
> treatment: as their interrupt handlers will unmask interrupts, it was
> necessary to add a bitmap for "is_suspending" which is used to address
> the possible corner case of unintentional IRQ unmasking because of ISR
> execution after a call to synchronize_irq().
> 
> Of course, unmasking the interrupts is being done as part of the reset
> happening during runtime_resume(): since we're anyway resuming all of
> GPU, JOB, MMU, the only additional action is to zero out the newly
> introduced `is_suspending` bitmap directly in the resume handler, as
> to avoid adding panfrost_{job,mmu}_resume_irq() function just for
> clearing own bits, especially because it currently makes way more sense
> to just zero out the bitmap.
> 
> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
> ---
>  drivers/gpu/drm/panfrost/panfrost_device.c |  4 ++++
>  drivers/gpu/drm/panfrost/panfrost_device.h |  7 +++++++
>  drivers/gpu/drm/panfrost/panfrost_gpu.c    |  7 +++++++
>  drivers/gpu/drm/panfrost/panfrost_gpu.h    |  1 +
>  drivers/gpu/drm/panfrost/panfrost_job.c    | 18 +++++++++++++++---
>  drivers/gpu/drm/panfrost/panfrost_job.h    |  1 +
>  drivers/gpu/drm/panfrost/panfrost_mmu.c    | 17 ++++++++++++++---
>  drivers/gpu/drm/panfrost/panfrost_mmu.h    |  1 +
>  8 files changed, 50 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/gpu/drm/panfrost/panfrost_device.c b/drivers/gpu/drm/panfrost/panfrost_device.c
> index c90ad5ee34e7..ed34aa55a7da 100644
> --- a/drivers/gpu/drm/panfrost/panfrost_device.c
> +++ b/drivers/gpu/drm/panfrost/panfrost_device.c
> @@ -407,6 +407,7 @@ static int panfrost_device_runtime_resume(struct device *dev)
>  {
>  	struct panfrost_device *pfdev = dev_get_drvdata(dev);
>  
> +	bitmap_zero(pfdev->is_suspending, PANFROST_COMP_BIT_MAX);

I would let each sub-block clear their bit in the reset path, since
that's where the IRQs are effectively unmasked.

>  	panfrost_device_reset(pfdev);
>  	panfrost_devfreq_resume(pfdev);
>  
> @@ -421,6 +422,9 @@ static int panfrost_device_runtime_suspend(struct device *dev)
>  		return -EBUSY;
>  
>  	panfrost_devfreq_suspend(pfdev);
> +	panfrost_job_suspend_irq(pfdev);
> +	panfrost_mmu_suspend_irq(pfdev);
> +	panfrost_gpu_suspend_irq(pfdev);
>  	panfrost_gpu_power_off(pfdev);
>  
>  	return 0;
> diff --git a/drivers/gpu/drm/panfrost/panfrost_device.h b/drivers/gpu/drm/panfrost/panfrost_device.h
> index 54a8aad54259..29f89f2d3679 100644
> --- a/drivers/gpu/drm/panfrost/panfrost_device.h
> +++ b/drivers/gpu/drm/panfrost/panfrost_device.h
> @@ -25,6 +25,12 @@ struct panfrost_perfcnt;
>  #define NUM_JOB_SLOTS 3
>  #define MAX_PM_DOMAINS 5
>  
> +enum panfrost_drv_comp_bits {
> +	PANFROST_COMP_BIT_MMU,
> +	PANFROST_COMP_BIT_JOB,
> +	PANFROST_COMP_BIT_MAX
> +};
> +
>  /**
>   * enum panfrost_gpu_pm - Supported kernel power management features
>   * @GPU_PM_CLK_DIS:  Allow disabling clocks during system suspend
> @@ -109,6 +115,7 @@ struct panfrost_device {
>  
>  	struct panfrost_features features;
>  	const struct panfrost_compatible *comp;
> +	DECLARE_BITMAP(is_suspending, PANFROST_COMP_BIT_MAX);

nit: Maybe s/is_suspending/suspended_irqs/, given the state remains
until the device is resumed.

  parent reply	other threads:[~2023-11-28 14:06 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <CGME20231128124521eucas1p203694ed4721b9ffcde6f7f1d1933d56a@eucas1p2.samsung.com>
2023-11-28 12:45 ` [PATCH v2 0/3] drm/panfrost: Fix poweroff and sync IRQs for suspend AngeloGioacchino Del Regno
2023-11-28 12:45   ` [PATCH v2 1/3] drm/panfrost: Ignore core_mask for poweroff and disable PWRTRANS irq AngeloGioacchino Del Regno
2023-11-28 13:27     ` Boris Brezillon
2023-11-28 12:45   ` [PATCH v2 2/3] drm/panfrost: Add gpu_irq, mmu_irq to struct panfrost_device AngeloGioacchino Del Regno
2023-11-28 13:31     ` Boris Brezillon
2023-11-28 12:45   ` [PATCH v2 3/3] drm/panfrost: Synchronize and disable interrupts before powering off AngeloGioacchino Del Regno
2023-11-28 13:57     ` Boris Brezillon
2023-11-28 15:10       ` AngeloGioacchino Del Regno
2023-11-28 15:53         ` Boris Brezillon
2023-11-28 16:10           ` AngeloGioacchino Del Regno
2023-11-28 16:41             ` Boris Brezillon
2023-11-28 14:06     ` Boris Brezillon [this message]
2023-11-28 15:10       ` AngeloGioacchino Del Regno
2023-11-28 15:38         ` Boris Brezillon
2023-11-28 15:42           ` AngeloGioacchino Del Regno
2023-11-28 15:58             ` Boris Brezillon
2023-11-29 17:31   ` [PATCH v2 0/3] drm/panfrost: Fix poweroff and sync IRQs for suspend Marek Szyprowski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20231128150612.17f6a095@collabora.com \
    --to=boris.brezillon@collabora.com \
    --cc=airlied@gmail.com \
    --cc=angelogioacchino.delregno@collabora.com \
    --cc=daniel@ffwll.ch \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=kernel@collabora.com \
    --cc=krzysztof.kozlowski@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=m.szyprowski@samsung.com \
    --cc=maarten.lankhorst@linux.intel.com \
    --cc=mripard@kernel.org \
    --cc=robh@kernel.org \
    --cc=steven.price@arm.com \
    --cc=tzimmermann@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox