[PATCH 2/2] drm/bridge: samsung-dsim: Fix porch calcalcuation rounding

[Adam Ford <aford173@gmail.com>]

When using video sync pulses, the HFP, HBP, and HSA are divided between
the available lanes if there is more than one lane.  For certain
timings and lane configurations, the HFP may not be evenly divisible.
If the HFP is rounded down, it ends up being too small which can cause
some monitors to not sync properly. In these instances, adjust htotal
and hsync to round the HFP up, and recalculate the htotal.

Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> # Kontron BL i.MX8MM with HDMI monitor
Signed-off-by: Adam Ford <aford173@gmail.com>

diff --git a/drivers/gpu/drm/bridge/samsung-dsim.c b/drivers/gpu/drm/bridge/samsung-dsim.c
index 239d253a7d71..f5795da1d8bb 100644
--- a/drivers/gpu/drm/bridge/samsung-dsim.c
+++ b/drivers/gpu/drm/bridge/samsung-dsim.c
@@ -1628,6 +1628,27 @@ static int samsung_dsim_atomic_check(struct drm_bridge *bridge,
 		adjusted_mode->flags |= (DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC);
 	}
 
+	/*
+	 * When using video sync pulses, the HFP, HBP, and HSA are divided between
+	 * the available lanes if there is more than one lane.  For certain
+	 * timings and lane configurations, the HFP may not be evenly divisible.
+	 * If the HFP is rounded down, it ends up being too small which can cause
+	 * some monitors to not sync properly. In these instances, adjust htotal
+	 * and hsync to round the HFP up, and recalculate the htotal. Through trial
+	 * and error, it appears that the HBP and HSA do not appearto need the same
+	 * correction that HFP does.
+	 */
+	if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_SYNC_PULSE && dsi->lanes > 1) {
+		int hfp = adjusted_mode->hsync_start - adjusted_mode->hdisplay;
+		int remainder = hfp % dsi->lanes;
+
+		if (remainder) {
+			adjusted_mode->hsync_start += remainder;
+			adjusted_mode->hsync_end   += remainder;
+			adjusted_mode->htotal      += remainder;
+		}
+	}
+
 	return 0;
 }
 
-- 
2.40.1