From: David Heidelberg <david@ixit.cz>
To: Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Michael Ellerman <mpe@ellerman.id.au>,
Nicholas Piggin <npiggin@gmail.com>,
Christophe Leroy <christophe.leroy@csgroup.eu>,
David Heidelberg <david@ixit.cz>,
Jakub Kicinski <kuba@kernel.org>,
Vladimir Oltean <vladimir.oltean@nxp.com>
Cc: devicetree@vger.kernel.org, linuxppc-dev@lists.ozlabs.org,
linux-kernel@vger.kernel.org
Subject: [RESEND PATCH] powerpc/fsl: fix the schema check errors for fsl,tmu-calibration
Date: Tue, 12 Dec 2023 19:44:58 +0100 [thread overview]
Message-ID: <20231212184515.82886-2-david@ixit.cz> (raw)
fsl,tmu-calibration is in u32-matrix. Use matching property syntax.
No functional changes. Fixes warnings as:
$ make dtbs_check
...
arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dt.yaml: tmu@30260000: fsl,tmu-calibration:0: Additional items are not allowed (1, 41, 2, 47, 3, 53, 4, 61, 5, 67, 6, 75, 7, 81, 8, 87, 9, 95, 10, 103, 11, 111
, 65536, 27, 65537, 35, 65538, 43, 65539, 51, 65540, 59, 65541, 67, 65542, 75, 65543, 85, 65544, 93, 65545, 103, 65546, 112, 131072, 23, 131073, 35, 131074, 45, 131075, 55, 131076, 65, 131077, 75, 131078, 87, 13
1079, 99, 131080, 111, 196608, 21, 196609, 33, 196610, 45, 196611, 57, 196612, 69, 196613, 83, 196614, 95, 196615, 113 were unexpected)
From schema: Documentation/devicetree/bindings/thermal/qoriq-thermal.yaml
...
Signed-off-by: David Heidelberg <david@ixit.cz>
---
arch/powerpc/boot/dts/fsl/t1023si-post.dtsi | 79 +++++++++++----------
arch/powerpc/boot/dts/fsl/t1040si-post.dtsi | 71 +++++++++---------
2 files changed, 76 insertions(+), 74 deletions(-)
diff --git a/arch/powerpc/boot/dts/fsl/t1023si-post.dtsi b/arch/powerpc/boot/dts/fsl/t1023si-post.dtsi
index d552044c5afc..aa5152ca8120 100644
--- a/arch/powerpc/boot/dts/fsl/t1023si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t1023si-post.dtsi
@@ -367,45 +367,46 @@ tmu: tmu@f0000 {
reg = <0xf0000 0x1000>;
interrupts = <18 2 0 0>;
fsl,tmu-range = <0xb0000 0xa0026 0x80048 0x30061>;
- fsl,tmu-calibration = <0x00000000 0x0000000f
- 0x00000001 0x00000017
- 0x00000002 0x0000001e
- 0x00000003 0x00000026
- 0x00000004 0x0000002e
- 0x00000005 0x00000035
- 0x00000006 0x0000003d
- 0x00000007 0x00000044
- 0x00000008 0x0000004c
- 0x00000009 0x00000053
- 0x0000000a 0x0000005b
- 0x0000000b 0x00000064
-
- 0x00010000 0x00000011
- 0x00010001 0x0000001c
- 0x00010002 0x00000024
- 0x00010003 0x0000002b
- 0x00010004 0x00000034
- 0x00010005 0x00000039
- 0x00010006 0x00000042
- 0x00010007 0x0000004c
- 0x00010008 0x00000051
- 0x00010009 0x0000005a
- 0x0001000a 0x00000063
-
- 0x00020000 0x00000013
- 0x00020001 0x00000019
- 0x00020002 0x00000024
- 0x00020003 0x0000002c
- 0x00020004 0x00000035
- 0x00020005 0x0000003d
- 0x00020006 0x00000046
- 0x00020007 0x00000050
- 0x00020008 0x00000059
-
- 0x00030000 0x00000002
- 0x00030001 0x0000000d
- 0x00030002 0x00000019
- 0x00030003 0x00000024>;
+ fsl,tmu-calibration =
+ <0x00000000 0x0000000f>,
+ <0x00000001 0x00000017>,
+ <0x00000002 0x0000001e>,
+ <0x00000003 0x00000026>,
+ <0x00000004 0x0000002e>,
+ <0x00000005 0x00000035>,
+ <0x00000006 0x0000003d>,
+ <0x00000007 0x00000044>,
+ <0x00000008 0x0000004c>,
+ <0x00000009 0x00000053>,
+ <0x0000000a 0x0000005b>,
+ <0x0000000b 0x00000064>,
+
+ <0x00010000 0x00000011>,
+ <0x00010001 0x0000001c>,
+ <0x00010002 0x00000024>,
+ <0x00010003 0x0000002b>,
+ <0x00010004 0x00000034>,
+ <0x00010005 0x00000039>,
+ <0x00010006 0x00000042>,
+ <0x00010007 0x0000004c>,
+ <0x00010008 0x00000051>,
+ <0x00010009 0x0000005a>,
+ <0x0001000a 0x00000063>,
+
+ <0x00020000 0x00000013>,
+ <0x00020001 0x00000019>,
+ <0x00020002 0x00000024>,
+ <0x00020003 0x0000002c>,
+ <0x00020004 0x00000035>,
+ <0x00020005 0x0000003d>,
+ <0x00020006 0x00000046>,
+ <0x00020007 0x00000050>,
+ <0x00020008 0x00000059>,
+
+ <0x00030000 0x00000002>,
+ <0x00030001 0x0000000d>,
+ <0x00030002 0x00000019>,
+ <0x00030003 0x00000024>;
#thermal-sensor-cells = <1>;
};
diff --git a/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi b/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi
index ad0ab33336b8..776788623204 100644
--- a/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi
@@ -447,41 +447,42 @@ tmu: tmu@f0000 {
reg = <0xf0000 0x1000>;
interrupts = <18 2 0 0>;
fsl,tmu-range = <0xa0000 0x90026 0x8004a 0x1006a>;
- fsl,tmu-calibration = <0x00000000 0x00000025
- 0x00000001 0x00000028
- 0x00000002 0x0000002d
- 0x00000003 0x00000031
- 0x00000004 0x00000036
- 0x00000005 0x0000003a
- 0x00000006 0x00000040
- 0x00000007 0x00000044
- 0x00000008 0x0000004a
- 0x00000009 0x0000004f
- 0x0000000a 0x00000054
-
- 0x00010000 0x0000000d
- 0x00010001 0x00000013
- 0x00010002 0x00000019
- 0x00010003 0x0000001f
- 0x00010004 0x00000025
- 0x00010005 0x0000002d
- 0x00010006 0x00000033
- 0x00010007 0x00000043
- 0x00010008 0x0000004b
- 0x00010009 0x00000053
-
- 0x00020000 0x00000010
- 0x00020001 0x00000017
- 0x00020002 0x0000001f
- 0x00020003 0x00000029
- 0x00020004 0x00000031
- 0x00020005 0x0000003c
- 0x00020006 0x00000042
- 0x00020007 0x0000004d
- 0x00020008 0x00000056
-
- 0x00030000 0x00000012
- 0x00030001 0x0000001d>;
+ fsl,tmu-calibration =
+ <0x00000000 0x00000025>,
+ <0x00000001 0x00000028>,
+ <0x00000002 0x0000002d>,
+ <0x00000003 0x00000031>,
+ <0x00000004 0x00000036>,
+ <0x00000005 0x0000003a>,
+ <0x00000006 0x00000040>,
+ <0x00000007 0x00000044>,
+ <0x00000008 0x0000004a>,
+ <0x00000009 0x0000004f>,
+ <0x0000000a 0x00000054>,
+
+ <0x00010000 0x0000000d>,
+ <0x00010001 0x00000013>,
+ <0x00010002 0x00000019>,
+ <0x00010003 0x0000001f>,
+ <0x00010004 0x00000025>,
+ <0x00010005 0x0000002d>,
+ <0x00010006 0x00000033>,
+ <0x00010007 0x00000043>,
+ <0x00010008 0x0000004b>,
+ <0x00010009 0x00000053>,
+
+ <0x00020000 0x00000010>,
+ <0x00020001 0x00000017>,
+ <0x00020002 0x0000001f>,
+ <0x00020003 0x00000029>,
+ <0x00020004 0x00000031>,
+ <0x00020005 0x0000003c>,
+ <0x00020006 0x00000042>,
+ <0x00020007 0x0000004d>,
+ <0x00020008 0x00000056>,
+
+ <0x00030000 0x00000012>,
+ <0x00030001 0x0000001d>;
#thermal-sensor-cells = <1>;
};
--
2.43.0
next reply other threads:[~2023-12-12 18:46 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-12 18:44 David Heidelberg [this message]
2023-12-13 5:17 ` [RESEND PATCH] powerpc/fsl: fix the schema check errors for fsl,tmu-calibration Michael Ellerman
2023-12-14 12:30 ` David Heidelberg
2023-12-19 6:36 ` Michael Ellerman
2023-12-21 10:38 ` Michael Ellerman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231212184515.82886-2-david@ixit.cz \
--to=david@ixit.cz \
--cc=christophe.leroy@csgroup.eu \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mpe@ellerman.id.au \
--cc=npiggin@gmail.com \
--cc=robh+dt@kernel.org \
--cc=vladimir.oltean@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox