From: Bjorn Helgaas <helgaas@kernel.org>
To: linux-pci@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, Igor Mammedov <imammedo@redhat.com>,
Fiona Ebner <f.ebner@proxmox.com>,
Dongli Zhang <dongli.zhang@oracle.com>,
Jonathan Woithe <jwoithe@just42.net>,
"Rafael J . Wysocki" <rafael@kernel.org>,
"Michael S . Tsirkin" <mst@redhat.com>,
Bjorn Helgaas <bhelgaas@google.com>,
stable@vger.kernel.org
Subject: [PATCH] Revert "PCI: acpiphp: Reassign resources on bridge if necessary"
Date: Thu, 14 Dec 2023 10:51:02 -0600 [thread overview]
Message-ID: <20231214165102.1093961-1-helgaas@kernel.org> (raw)
From: Bjorn Helgaas <bhelgaas@google.com>
This reverts commit 40613da52b13fb21c5566f10b287e0ca8c12c4e9 and the
subsequent fix to it:
cc22522fd55e ("PCI: acpiphp: Use pci_assign_unassigned_bridge_resources() only for non-root bus")
40613da52b13 fixed a problem where hot-adding a device with large BARs
failed if the bridge windows programmed by firmware were not large enough.
cc22522fd55e ("PCI: acpiphp: Use pci_assign_unassigned_bridge_resources()
only for non-root bus") fixed a problem with 40613da52b13: an ACPI hot-add
of a device on a PCI root bus (common in the virt world) or firmware
sending ACPI Bus Check to non-existent Root Ports (e.g., on Dell Inspiron
7352/0W6WV0) caused a NULL pointer dereference and suspend/resume hangs.
Unfortunately the combination of 40613da52b13 and cc22522fd55e caused other
problems:
- Fiona reported that hot-add of SCSI disks in QEMU virtual machine fails
sometimes.
- Dongli reported a similar problem with hot-add of SCSI disks.
- Jonathan reported a console freeze during boot on bare metal due to an
error in radeon GPU initialization.
Revert both patches to avoid adding these problems. This means we will
again see the problems with hot-adding devices with large BARs and the NULL
pointer dereferences and suspend/resume issues that 40613da52b13 and
cc22522fd55e were intended to fix.
Fixes: 40613da52b13 ("PCI: acpiphp: Reassign resources on bridge if necessary")
Fixes: cc22522fd55e ("PCI: acpiphp: Use pci_assign_unassigned_bridge_resources() only for non-root bus")
Reported-by: Fiona Ebner <f.ebner@proxmox.com>
Closes: https://lore.kernel.org/r/9eb669c0-d8f2-431d-a700-6da13053ae54@proxmox.com
Reported-by: Dongli Zhang <dongli.zhang@oracle.com>
Closes: https://lore.kernel.org/r/3c4a446a-b167-11b8-f36f-d3c1b49b42e9@oracle.com
Reported-by: Jonathan Woithe <jwoithe@just42.net>
Closes: https://lore.kernel.org/r/ZXpaNCLiDM+Kv38H@marvin.atrad.com.au
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: <stable@vger.kernel.org>
Cc: Igor Mammedov <imammedo@redhat.com>
---
drivers/pci/hotplug/acpiphp_glue.c | 9 +++------
1 file changed, 3 insertions(+), 6 deletions(-)
diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
index 601129772b2d..5b1f271c6034 100644
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -512,15 +512,12 @@ static void enable_slot(struct acpiphp_slot *slot, bool bridge)
if (pass && dev->subordinate) {
check_hotplug_bridge(slot, dev);
pcibios_resource_survey_bus(dev->subordinate);
- if (pci_is_root_bus(bus))
- __pci_bus_size_bridges(dev->subordinate, &add_list);
+ __pci_bus_size_bridges(dev->subordinate,
+ &add_list);
}
}
}
- if (pci_is_root_bus(bus))
- __pci_bus_assign_resources(bus, &add_list, NULL);
- else
- pci_assign_unassigned_bridge_resources(bus->self);
+ __pci_bus_assign_resources(bus, &add_list, NULL);
}
acpiphp_sanitize_bus(bus);
--
2.34.1
next reply other threads:[~2023-12-14 16:52 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-14 16:51 Bjorn Helgaas [this message]
2023-12-14 16:53 ` [PATCH] Revert "PCI: acpiphp: Reassign resources on bridge if necessary" Michael S. Tsirkin
2023-12-15 9:13 ` Igor Mammedov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231214165102.1093961-1-helgaas@kernel.org \
--to=helgaas@kernel.org \
--cc=bhelgaas@google.com \
--cc=dongli.zhang@oracle.com \
--cc=f.ebner@proxmox.com \
--cc=imammedo@redhat.com \
--cc=jwoithe@just42.net \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=mst@redhat.com \
--cc=rafael@kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox