[PATCH net-next v4 10/13] net: ethtool: pse-pd: Target the command to the requested PHY

[Maxime Chevallier <maxime.chevallier@bootlin.com>]

PSE and PD configuration is a PHY-specific command. Instead of targeting
the command towards dev->phydev, use the request to pick the targeted
PHY device.

Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
---
V4: No changes
V3: No changes
V2: New patch

 net/ethtool/pse-pd.c | 14 +++-----------
 1 file changed, 3 insertions(+), 11 deletions(-)

diff --git a/net/ethtool/pse-pd.c b/net/ethtool/pse-pd.c
index cc478af77111..0d9cd9c87104 100644
--- a/net/ethtool/pse-pd.c
+++ b/net/ethtool/pse-pd.c
@@ -31,17 +31,10 @@ const struct nla_policy ethnl_pse_get_policy[ETHTOOL_A_PSE_HEADER + 1] = {
 	[ETHTOOL_A_PSE_HEADER] = NLA_POLICY_NESTED(ethnl_header_policy),
 };
 
-static int pse_get_pse_attributes(struct net_device *dev,
+static int pse_get_pse_attributes(struct phy_device *phydev,
 				  struct netlink_ext_ack *extack,
 				  struct pse_reply_data *data)
 {
-	struct phy_device *phydev = dev->phydev;
-
-	if (!phydev) {
-		NL_SET_ERR_MSG(extack, "No PHY is attached");
-		return -EOPNOTSUPP;
-	}
-
 	if (!phydev->psec) {
 		NL_SET_ERR_MSG(extack, "No PSE is attached");
 		return -EOPNOTSUPP;
@@ -64,7 +57,7 @@ static int pse_prepare_data(const struct ethnl_req_info *req_base,
 	if (ret < 0)
 		return ret;
 
-	ret = pse_get_pse_attributes(dev, info->extack, data);
+	ret = pse_get_pse_attributes(req_base->phydev, info->extack, data);
 
 	ethnl_ops_complete(dev);
 
@@ -124,7 +117,6 @@ ethnl_set_pse_validate(struct ethnl_req_info *req_info, struct genl_info *info)
 static int
 ethnl_set_pse(struct ethnl_req_info *req_info, struct genl_info *info)
 {
-	struct net_device *dev = req_info->dev;
 	struct pse_control_config config = {};
 	struct nlattr **tb = info->attrs;
 	struct phy_device *phydev;
@@ -132,7 +124,7 @@ ethnl_set_pse(struct ethnl_req_info *req_info, struct genl_info *info)
 	/* this values are already validated by the ethnl_pse_set_policy */
 	config.admin_cotrol = nla_get_u32(tb[ETHTOOL_A_PODL_PSE_ADMIN_CONTROL]);
 
-	phydev = dev->phydev;
+	phydev = req_info->phydev;
 	if (!phydev) {
 		NL_SET_ERR_MSG(info->extack, "No PHY is attached");
 		return -EOPNOTSUPP;
-- 
2.43.0