Re: [PATCH 1/2] lib/strtox: introduce kstrtoull_suffix() helper

[David Disseldorp <ddiss@suse.de>]

Hi Qu,

On Fri, 15 Dec 2023 19:09:23 +1030, Qu Wenruo wrote:

> Just as mentioned in the comment of memparse(), the simple_stroull()
> usage can lead to overflow all by itself.
> 
> Furthermore, the suffix calculation is also super overflow prone because
> that some suffix like "E" itself would eat 60bits, leaving only 4 bits
> available.
> 
> And that suffix "E" can also lead to confusion since it's using the same
> char of hex Ox'E'.
> 
> One simple example to expose all the problem is to use memparse() on
> "25E".
> The correct value should be 28823037615171174400, but the suffix E makes
> it super simple to overflow, resulting the incorrect value
> 10376293541461622784 (9E).
> 
> So here we introduce a new helper to address the problem,
> kstrtoull_suffix():
> 
> - Enhance _kstrtoull()
>   This allow _kstrtoull() to return even if it hits an invalid char, as
>   long as the optional parameter @retptr is provided.
> 
>   If @retptr is provided, _kstrtoull() would try its best to parse the
>   valid part, and leave the remaining to be handled by the caller.
> 
>   If @retptr is not provided, the behavior is not altered.
> 
> - New kstrtoull_suffix() helper
>   This new helper utilize the new @retptr capability of _kstrtoull(),
>   and provides 2 new ability:
> 
>   * Allow certain suffixes to be chosen
>     The recommended suffix list is "KkMmGgTtPp", excluding the overflow
>     prone "Ee". Undermost cases there is really no need to use "E" suffix
>     anyway.
>     And for those who really need that exabytes suffix, they can enable
>     that suffix pretty easily.
> 
>   * Add overflow checks for the suffixes
>     If the original number string is fine, but with the extra left
>     shift overflow happens, then -EOVERFLOW is returned.
> 
> Cc: Andrew Morton <akpm@linux-foundation.org>
> Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> Cc: linux-kernel@vger.kernel.org
> Signed-off-by: Qu Wenruo <wqu@suse.com>
> ---
>  include/linux/kstrtox.h |   7 +++
>  lib/kstrtox.c           | 113 ++++++++++++++++++++++++++++++++++++++--
>  2 files changed, 115 insertions(+), 5 deletions(-)
> 
> diff --git a/include/linux/kstrtox.h b/include/linux/kstrtox.h
> index 7fcf29a4e0de..12c754152c15 100644
> --- a/include/linux/kstrtox.h
> +++ b/include/linux/kstrtox.h
> @@ -9,6 +9,13 @@
>  int __must_check _kstrtoul(const char *s, unsigned int base, unsigned long *res);
>  int __must_check _kstrtol(const char *s, unsigned int base, long *res);
>  
> +/*
> + * The default suffix list would not include "E" since it's too easy to overflow
> + * and not much real world usage.
> + */
> +#define KSTRTOULL_SUFFIX_DEFAULT		("KkMmGgTtPp")
> +int kstrtoull_suffix(const char *s, unsigned int base, unsigned long long *res,
> +		     const char *suffixes);
>  int __must_check kstrtoull(const char *s, unsigned int base, unsigned long long *res);
>  int __must_check kstrtoll(const char *s, unsigned int base, long long *res);
>  
> diff --git a/lib/kstrtox.c b/lib/kstrtox.c
> index d586e6af5e5a..63831207dfdd 100644
> --- a/lib/kstrtox.c
> +++ b/lib/kstrtox.c
> @@ -93,7 +93,8 @@ unsigned int _parse_integer(const char *s, unsigned int base, unsigned long long
>  	return _parse_integer_limit(s, base, p, INT_MAX);
>  }
>  
> -static int _kstrtoull(const char *s, unsigned int base, unsigned long long *res)
> +static int _kstrtoull(const char *s, unsigned int base, unsigned long long *res,
> +		      char **retptr)
>  {
>  	unsigned long long _res;
>  	unsigned int rv;
> @@ -105,11 +106,19 @@ static int _kstrtoull(const char *s, unsigned int base, unsigned long long *res)
>  	if (rv == 0)
>  		return -EINVAL;
>  	s += rv;
> -	if (*s == '\n')
> +
> +	/*
> +	 * If @retptr is provided, caller is responsible to detect
> +	 * the extra chars, otherwise we can skip one newline.
> +	 */
> +	if (!retptr && *s == '\n')
>  		s++;
> -	if (*s)
> +	if (!retptr && *s)
>  		return -EINVAL;
> +
>  	*res = _res;
> +	if (retptr)
> +		*retptr = (char *)s;
>  	return 0;
>  }
>  
> @@ -133,10 +142,104 @@ int kstrtoull(const char *s, unsigned int base, unsigned long long *res)
>  {
>  	if (s[0] == '+')
>  		s++;
> -	return _kstrtoull(s, base, res);
> +	return _kstrtoull(s, base, res, NULL);
>  }
>  EXPORT_SYMBOL(kstrtoull);
>  
> +/**
> + * kstrtoull_suffix - convert a string to ull with suffixes support
> + * @s: The start of the string. The string must be null-terminated, and may also
> + *  include a single newline before its terminating null.
> + * @base: The number base to use. The maximum supported base is 16. If base is
> + *  given as 0, then the base of the string is automatically detected with the
> + *  conventional semantics - If it begins with 0x the number will be parsed as a
> + *  hexadecimal (case insensitive), if it otherwise begins with 0, it will be
> + *  parsed as an octal number. Otherwise it will be parsed as a decimal.
> + * @res: Where to write the result of the conversion on success.
> + * @suffixes: A string of acceptable suffixes, must be provided. Or caller
> + *  should use kstrtoull() directly.

The suffixes parameter seems a bit cumbersome; callers need to provide
both upper and lower cases, and unsupported characters aren't checked
for. However, I can't think of any better suggestions at this stage.

> + *
> + *
> + * Return 0 on success.
> + *
> + * Return -ERANGE on overflow or -EINVAL if invalid chars found.
> + * Return value must be checked.
> + */
> +int kstrtoull_suffix(const char *s, unsigned int base, unsigned long long *res,
> +		     const char *suffixes)
> +{
> +	unsigned long long init_value;
> +	unsigned long long final_value;
> +	char *endptr;
> +	int ret;
> +
> +	ret = _kstrtoull(s, base, &init_value, &endptr);
> +	/* Either already overflow or no number string at all. */
> +	if (ret < 0)
> +		return ret;
> +	final_value = init_value;
> +	/* No suffixes. */
> +	if (!*endptr)
> +		goto done;
> +
> +	switch (*endptr) {
> +	case 'K':
> +	case 'k':
> +		if (!strchr(suffixes, *endptr))
> +			return -EINVAL;
> +		final_value <<= 10;
> +		endptr++;
> +		break;
> +	case 'M':
> +	case 'm':
> +		if (!strchr(suffixes, *endptr))
> +			return -EINVAL;
> +		final_value <<= 20;
> +		endptr++;
> +		break;
> +	case 'G':
> +	case 'g':
> +		if (!strchr(suffixes, *endptr))
> +			return -EINVAL;
> +		final_value <<= 30;
> +		endptr++;
> +		break;
> +	case 'T':
> +	case 't':
> +		if (!strchr(suffixes, *endptr))
> +			return -EINVAL;
> +		final_value <<= 40;
> +		endptr++;
> +		break;
> +	case 'P':
> +	case 'p':
> +		if (!strchr(suffixes, *endptr))
> +			return -EINVAL;
> +		final_value <<= 50;
> +		endptr++;
> +		break;
> +	case 'E':
> +	case 'e':
> +		if (!strchr(suffixes, *endptr))
> +			return -EINVAL;
> +		final_value <<= 60;
> +		endptr++;
> +		break;
> +	}
> +	if (*endptr == '\n')

Nit: the per-case logic could be simplified to a single "shift_val = X"
if you initialise and handle !shift_val.

> +		endptr++;
> +	if (*endptr)
> +		return -EINVAL;
> +
> +	/* Overflow check. */
> +	if (final_value < init_value)
> +		return -EOVERFLOW;
> +done:
> +	*res = final_value;
> +	return 0;
> +}
> +EXPORT_SYMBOL(kstrtoull_suffix);
> +
>  /**
>   * kstrtoll - convert a string to a long long
>   * @s: The start of the string. The string must be null-terminated, and may also
> @@ -159,7 +262,7 @@ int kstrtoll(const char *s, unsigned int base, long long *res)
>  	int rv;
>  
>  	if (s[0] == '-') {
> -		rv = _kstrtoull(s + 1, base, &tmp);
> +		rv = _kstrtoull(s + 1, base, &tmp, NULL);
>  		if (rv < 0)
>  			return rv;
>  		if ((long long)-tmp > 0)