From: Trevor Woerner <twoerner@gmail.com>
To: linux-kernel@vger.kernel.org, Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Heiko Stuebner <heiko@sntech.de>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org
Subject: [PATCH] arm64: dts: rockchip: rk3308-rock-pi-s cleanup
Date: Tue, 19 Dec 2023 12:38:13 -0500 [thread overview]
Message-ID: <20231219173814.1569-1-twoerner@gmail.com> (raw)
Perform the following cleanups on a previous patch:
- indent lines after "gpio-line-names"
- fix D0-D8 -> D0-D7
- sort phandle references
Fixes: c45de75d7a9a ("arm64: dts: rockchip: add gpio-line-names to rk3308-rock-pi-s")
Signed-off-by: Trevor Woerner <twoerner@gmail.com>
---
.../boot/dts/rockchip/rk3308-rock-pi-s.dts | 120 +++++++++---------
1 file changed, 62 insertions(+), 58 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts b/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts
index f2d7251de298..b47fe02c33fb 100644
--- a/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts
@@ -143,6 +143,68 @@ &gmac {
status = "okay";
};
+&gpio0 {
+ gpio-line-names =
+ /* GPIO0_A0 - A7 */
+ "", "", "", "", "", "", "", "",
+ /* GPIO0_B0 - B7 */
+ "", "", "", "header1-pin3 [GPIO0_B3]",
+ "header1-pin5 [GPIO0_B4]", "", "",
+ "header1-pin11 [GPIO0_B7]",
+ /* GPIO0_C0 - C7 */
+ "header1-pin13 [GPIO0_C0]",
+ "header1-pin15 [GPIO0_C1]", "", "", "",
+ "", "", "",
+ /* GPIO0_D0 - D7 */
+ "", "", "", "", "", "", "", "";
+};
+
+&gpio1 {
+ gpio-line-names =
+ /* GPIO1_A0 - A7 */
+ "", "", "", "", "", "", "", "",
+ /* GPIO1_B0 - B7 */
+ "", "", "", "", "", "", "", "",
+ /* GPIO1_C0 - C7 */
+ "", "", "", "", "", "", "header1-pin21 [GPIO1_C6]",
+ "header1-pin19 [GPIO1_C7]",
+ /* GPIO1_D0 - D7 */
+ "header1-pin23 [GPIO1_D0]", "header1-pin24 [GPIO1_D1]",
+ "", "", "", "", "", "";
+};
+
+&gpio2 {
+ gpio-line-names =
+ /* GPIO2_A0 - A7 */
+ "header1-pin10 [GPIO2_A0]", "header1-pin8 [GPIO2_A1]",
+ "", "",
+ "header1-pin7 [GPIO2_A4]", "header1-pin12 [GPIO2_A5]",
+ "header2-pin46 [GPIO2_A6]", "header1-pin22 [GPIO1_A7]",
+ /* GPIO2_B0 - B7 */
+ "header2-pin45 [GPIO2_B0]", "header1-pin18 [GPIO2_B1]",
+ "header1-pin16 [GPIO2_B2]", "header2-pin44 [GPIO2_B3]",
+ "header2-pin43 [GPIO2_B4]", "header2-pin28 [GPIO2_B5]",
+ "header2-pin30 [GPIO2_B6]", "header2-pin32 [GPIO2_B7]",
+ /* GPIO2_C0 - C7 */
+ "header2-pin34 [GPIO2_C0]", "", "", "", "", "", "", "",
+ /* GPIO2_D0 - D7 */
+ "", "", "", "", "", "", "", "";
+};
+
+&gpio3 {
+ gpio-line-names =
+ /* GPIO3_A0 - A7 */
+ "", "", "", "", "", "", "", "",
+ /* GPIO3_B0 - B7 */
+ "", "", "header2-pin42 [GPIO3_B2]",
+ "header2-pin41 [GPIO3_B3]", "header2-pin40 [GPIO3_B4]",
+ "header2-pin39 [GPIO3_B5]", "", "",
+ /* GPIO3_C0 - C7 */
+ "", "", "", "", "", "", "", "",
+ /* GPIO3_D0 - D7 */
+ "", "", "", "", "", "", "", "";
+};
+
&i2c1 {
status = "okay";
};
@@ -250,61 +312,3 @@ &usb20_otg {
&wdt {
status = "okay";
};
-
-&gpio0 {
- gpio-line-names =
- /* GPIO0_A0 - A7 */
- "", "", "", "", "", "", "", "",
- /* GPIO0_B0 - B7 */
- "", "", "", "header1-pin3 [GPIO0_B3]", "header1-pin5 [GPIO0_B4]",
- "", "", "header1-pin11 [GPIO0_B7]",
- /* GPIO0_C0 - C7 */
- "header1-pin13 [GPIO0_C0]", "header1-pin15 [GPIO0_C1]", "", "", "",
- "", "", "",
- /* GPIO0_D0 - D8 */
- "", "", "", "", "", "", "", "";
-};
-
-&gpio1 {
- gpio-line-names =
- /* GPIO1_A0 - A7 */
- "", "", "", "", "", "", "", "",
- /* GPIO1_B0 - B7 */
- "", "", "", "", "", "", "", "",
- /* GPIO1_C0 - C7 */
- "", "", "", "", "", "", "header1-pin21 [GPIO1_C6]",
- "header1-pin19 [GPIO1_C7]",
- /* GPIO1_D0 - D8 */
- "header1-pin23 [GPIO1_D0]", "header1-pin24 [GPIO1_D1]", "", "", "",
- "", "", "";
-};
-
-&gpio2 {
- gpio-line-names =
- /* GPIO2_A0 - A7 */
- "header1-pin10 [GPIO2_A0]", "header1-pin8 [GPIO2_A1]", "", "",
- "header1-pin7 [GPIO2_A4]", "header1-pin12 [GPIO2_A5]",
- "header2-pin46 [GPIO2_A6]", "header1-pin22 [GPIO1_A7]",
- /* GPIO2_B0 - B7 */
- "header2-pin45 [GPIO2_B0]", "header1-pin18 [GPIO2_B1]",
- "header1-pin16 [GPIO2_B2]", "header2-pin44 [GPIO2_B3]",
- "header2-pin43 [GPIO2_B4]", "header2-pin28 [GPIO2_B5]",
- "header2-pin30 [GPIO2_B6]", "header2-pin32 [GPIO2_B7]",
- /* GPIO2_C0 - C7 */
- "header2-pin34 [GPIO2_C0]", "", "", "", "", "", "", "",
- /* GPIO2_D0 - D8 */
- "", "", "", "", "", "", "", "";
-};
-
-&gpio3 {
- gpio-line-names =
- /* GPIO3_A0 - A7 */
- "", "", "", "", "", "", "", "",
- /* GPIO3_B0 - B7 */
- "", "", "header2-pin42 [GPIO3_B2]", "header2-pin41 [GPIO3_B3]",
- "header2-pin40 [GPIO3_B4]", "header2-pin39 [GPIO3_B5]", "", "",
- /* GPIO3_C0 - C7 */
- "", "", "", "", "", "", "", "",
- /* GPIO3_D0 - D8 */
- "", "", "", "", "", "", "", "";
-};
--
2.43.0.76.g1a87c842ece3
next reply other threads:[~2023-12-19 17:38 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-19 17:38 Trevor Woerner [this message]
2023-12-24 19:54 ` [PATCH] arm64: dts: rockchip: rk3308-rock-pi-s cleanup Heiko Stuebner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231219173814.1569-1-twoerner@gmail.com \
--to=twoerner@gmail.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=heiko@sntech.de \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox