Re: [PATCH v2 3/4] media: i2c: alvium: inline set_frame_interval into s_frame_interval

[Laurent Pinchart <laurent.pinchart@ideasonboard.com>]

Hi Tommaso,

Thank you for the patch.

On Wed, Dec 20, 2023 at 09:56:08AM +0100, Tommaso Merciai wrote:
> Inline alvium_set_frame_interval() into alvium_s_frame_interval().
> The alvium_set_frame_interval() is called once only, by
> alvium_s_frame_interval(). The latter is a thin wrapper around the
> former. Inline the function in its caller to make the code more
> readable.
> 
> Signed-off-by: Tommaso Merciai <tomm.merciai@gmail.com>
> ---
> Changes Since v1:
>  - Now this commit is the 3/4 of the series
>  - Fixed commit body as suggested by LPinchart
> 
>  drivers/media/i2c/alvium-csi2.c | 51 ++++++++++++---------------------
>  1 file changed, 19 insertions(+), 32 deletions(-)
> 
> diff --git a/drivers/media/i2c/alvium-csi2.c b/drivers/media/i2c/alvium-csi2.c
> index a9ff6cc97cff..b234d74454bf 100644
> --- a/drivers/media/i2c/alvium-csi2.c
> +++ b/drivers/media/i2c/alvium-csi2.c
> @@ -1660,14 +1660,26 @@ static int alvium_g_frame_interval(struct v4l2_subdev *sd,
>  	return 0;
>  }
>  
> -static int alvium_set_frame_interval(struct alvium_dev *alvium,
> -				     struct v4l2_subdev_frame_interval *fi,
> -				     u64 *req_fr)
> +static int alvium_s_frame_interval(struct v4l2_subdev *sd,
> +				   struct v4l2_subdev_state *sd_state,
> +				   struct v4l2_subdev_frame_interval *fi)
>  {
> +	struct alvium_dev *alvium = sd_to_alvium(sd);
>  	struct device *dev = &alvium->i2c_client->dev;
> +	u64 req_fr = ALVIUM_DEFAULT_FR_HZ;

No need to initialize the variable. With this fixed,

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

>  	u64 dft_fr, min_fr, max_fr;
>  	int ret;
>  
> +	/*
> +	 * FIXME: Implement support for V4L2_SUBDEV_FORMAT_TRY, using the V4L2
> +	 * subdev active state API.
> +	 */
> +	if (fi->which != V4L2_SUBDEV_FORMAT_ACTIVE)
> +		return -EINVAL;
> +
> +	if (alvium->streaming)
> +		return -EBUSY;
> +
>  	if (fi->interval.denominator == 0)
>  		return -EINVAL;
>  
> @@ -1682,41 +1694,16 @@ static int alvium_set_frame_interval(struct alvium_dev *alvium,
>  	dev_dbg(dev, "fi->interval.denominator = %d\n",
>  		fi->interval.denominator);
>  
> -	*req_fr = (u64)((fi->interval.denominator * USEC_PER_SEC) /
> +	req_fr = (u64)((fi->interval.denominator * USEC_PER_SEC) /
>  		       fi->interval.numerator);
>  
> -	if (*req_fr >= max_fr && *req_fr <= min_fr)
> -		*req_fr = dft_fr;
> +	if (req_fr >= max_fr && req_fr <= min_fr)
> +		req_fr = dft_fr;
>  
>  	alvium->frame_interval.numerator = fi->interval.numerator;
>  	alvium->frame_interval.denominator = fi->interval.denominator;
>  
> -	return 0;
> -}
> -
> -static int alvium_s_frame_interval(struct v4l2_subdev *sd,
> -				   struct v4l2_subdev_state *sd_state,
> -				   struct v4l2_subdev_frame_interval *fi)
> -{
> -	struct alvium_dev *alvium = sd_to_alvium(sd);
> -	u64 req_fr = ALVIUM_DEFAULT_FR_HZ;
> -	int ret;
> -
> -	/*
> -	 * FIXME: Implement support for V4L2_SUBDEV_FORMAT_TRY, using the V4L2
> -	 * subdev active state API.
> -	 */
> -	if (fi->which != V4L2_SUBDEV_FORMAT_ACTIVE)
> -		return -EINVAL;
> -
> -	if (alvium->streaming)
> -		return -EBUSY;
> -
> -	ret = alvium_set_frame_interval(alvium, fi, &req_fr);
> -	if (!ret)
> -		ret = alvium_set_frame_rate(alvium, req_fr);
> -
> -	return ret;
> +	return alvium_set_frame_rate(alvium, req_fr);
>  }
>  
>  static int alvium_enum_mbus_code(struct v4l2_subdev *sd,

-- 
Regards,

Laurent Pinchart