public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Ethan Zhao <haifeng.zhao@linux.intel.com>
To: kevin.tian@intel.com, bhelgaas@google.com,
	baolu.lu@linux.intel.com, dwmw2@infradead.org, will@kernel.org,
	robin.murphy@arm.com, lukas@wunner.de
Cc: linux-pci@vger.kernel.org, iommu@lists.linux.dev,
	linux-kernel@vger.kernel.org
Subject: [RFC PATCH v10 0/5] fix vt-d hard lockup when hotplug ATS capable device
Date: Thu, 28 Dec 2023 12:02:01 -0500	[thread overview]
Message-ID: <20231228170206.720675-1-haifeng.zhao@linux.intel.com> (raw)

This patchset is used to fix vt-d hard lockup reported when surprise
unplug ATS capable endpoint device connects to system via PCIe switch
as following topology.                                               
                                                                    
     +-[0000:15]-+-00.0  Intel Corporation Ice Lake Memory Map/VT-d 
     |           +-00.1  Intel Corporation Ice Lake Mesh 2 PCIe     
     |           +-00.2  Intel Corporation Ice Lake RAS             
     |           +-00.4  Intel Corporation Device 0b23              
     |           \-01.0-[16-1b]----00.0-[17-1b]--+-00.0-[18]----00.0 
                                           NVIDIA Corporation Device 2324 
     |                                           +-01.0-[19]----00.0    
                          Mellanox Technologies MT2910 Family [ConnectX-7]
                                                                          
User brought endpoint device 19:00.0's link down by flapping it's hotplug 
capable slot 17:01.0 link control register, as sequence DLLSC response, 
pciehp_ist() will unload device driver and power it off, durning device 
driver is unloading an iommu device-TLB invalidation (Intel VT-d spec, or 
'ATS Invalidation' in PCIe spec) request issued to that link down device, 
thus a long time completion/timeout waiting in interrupt context causes   
continuous hard lockup warnning and system hang.                         
                                                                         
Other detail, see every patch commit log.                                
                                                                         
patch [3&4] were tested by yehaorong@bytedance.com on stable v6.7-rc4.   
patch [1-5] passed compiling on stable v6.7-rc6.                    
                                                                         
                                                                         
change log:  
v10:
- refactor qi_submit_sync() and its callers to get pci_dev instance, as
  Kevin pointed out add target_flush_dev to iommu is not right.
v9:
- unify all spelling of ATS Invalidation adhere to PCIe spec per Bjorn's
  suggestion.                                                         
v8:
- add a patch to break the loop for timeout device-TLB invalidation, as
  Bjorn said there is possibility device just no response but not gone.  
v7:                                                                      
- reorder patches and revise commit log per Bjorn's guide.              
- other code and commit log revise per Lukas' suggestion.               
- rebased to stable v6.7-rc6.                                           
v6:                                                                     
- add two patches to break out device-TLB invalidation if device is gone. 
v5:                                                                       
- add a patch try to fix the rare case (surprise remove a device in       
  safe removal process). not work because surprise removal handling can't 
  re-enter when another safe removal is in process.                       
v4:                                                                       
- move the PCI device state checking after ATS per Baolu's suggestion.    
v3:                                                                       
- fix commit description typo.                                            
v2:                                                                       
- revise commit[1] description part according to Lukas' suggestion.       
- revise commit[2] description to clarify the issue's impact.             
v1:                                                                       
- https://lore.kernel.org/lkml/20231213034637.2603013-1-haifeng.zhao@     
linux.intel.com/T/                                                        
                                                                          
                                                                          
Thanks,                                                                   
Ethan                           


Ethan Zhao (5):
  iommu/vt-d: add pci_dev parameter to qi_submit_sync and refactor
    callers
  iommu/vt-d: break out ATS Invalidation if target device is gone
  PCI: make pci_dev_is_disconnected() helper public for other drivers
  iommu/vt-d: don't issue ATS Invalidation request when device is
    disconnected
  iommu/vt-d: don't loop for timeout ATS Invalidation request forever

 drivers/iommu/intel/dmar.c          | 55 ++++++++++++++++++++++-------
 drivers/iommu/intel/iommu.c         | 26 ++++----------
 drivers/iommu/intel/iommu.h         | 17 +++++----
 drivers/iommu/intel/irq_remapping.c |  2 +-
 drivers/iommu/intel/pasid.c         | 13 +++----
 drivers/iommu/intel/svm.c           | 13 ++++---
 drivers/pci/pci.h                   |  5 ---
 include/linux/pci.h                 |  5 +++
 8 files changed, 74 insertions(+), 62 deletions(-)

-- 
2.31.1


             reply	other threads:[~2023-12-28 17:02 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-12-28 17:02 Ethan Zhao [this message]
2023-12-28 17:02 ` [RFC PATCH v10 1/5] iommu/vt-d: add pci_dev parameter to qi_submit_sync and refactor callers Ethan Zhao
2024-01-10  4:59   ` Baolu Lu
2024-01-10  7:51     ` Ethan Zhao
2023-12-28 17:02 ` [RFC PATCH v10 2/5] iommu/vt-d: break out ATS Invalidation if target device is gone Ethan Zhao
2024-01-10  5:17   ` Baolu Lu
2024-01-10  8:29     ` Ethan Zhao
2023-12-29  8:18 ` [RFC PATCH v10 0/5] fix vt-d hard lockup when hotplug ATS capable device Tian, Kevin
2023-12-29  9:28   ` Ethan Zhao
2024-01-09  1:24 ` Ethan Zhao
2024-01-15  7:58 ` Ethan Zhao
2024-01-17  3:24   ` Baolu Lu
2024-01-17  5:26     ` Ethan Zhao
2024-01-17  5:38       ` Ethan Zhao
2024-01-17  9:00         ` Ethan Zhao
2024-01-18  0:46           ` Baolu Lu
2024-01-18  2:26             ` Ethan Zhao
2024-01-18  2:32               ` Ethan Zhao

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20231228170206.720675-1-haifeng.zhao@linux.intel.com \
    --to=haifeng.zhao@linux.intel.com \
    --cc=baolu.lu@linux.intel.com \
    --cc=bhelgaas@google.com \
    --cc=dwmw2@infradead.org \
    --cc=iommu@lists.linux.dev \
    --cc=kevin.tian@intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lukas@wunner.de \
    --cc=robin.murphy@arm.com \
    --cc=will@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox