From: Frank Li <Frank.Li@nxp.com>
To: krzysztof.kozlowski@linaro.org
Cc: Frank.Li@nxp.com, bhelgaas@google.com, conor+dt@kernel.org,
devicetree@vger.kernel.org, festevam@gmail.com,
helgaas@kernel.org, hongxing.zhu@nxp.com, imx@lists.linux.dev,
kernel@pengutronix.de, krzysztof.kozlowski+dt@linaro.org,
kw@linux.com, l.stach@pengutronix.de,
linux-arm-kernel@lists.infradead.org, linux-imx@nxp.com,
linux-kernel@vger.kernel.org, linux-pci@vger.kernel.org,
lpieralisi@kernel.org, manivannan.sadhasivam@linaro.org,
robh@kernel.org, s.hauer@pengutronix.de, shawnguo@kernel.org
Subject: [PATCH v8 16/16] PCI: imx6: Add iMX95 Endpoint (EP) support
Date: Mon, 8 Jan 2024 18:21:45 -0500 [thread overview]
Message-ID: <20240108232145.2116455-17-Frank.Li@nxp.com> (raw)
In-Reply-To: <20240108232145.2116455-1-Frank.Li@nxp.com>
Add iMX95 EP support and add 64bit address support. Internal bus bridge for
PCI support 64bit dma address in iMX95. Hence, call
dma_set_mask_and_coherent() to set 64 bit DMA mask.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
Notes:
Change from v7 to v8
- Update commit message
- Using Fixme
- Update clks_cnts by ARRAY_SIZE
Change from v4 to v7
- none
Change from v3 to v4
- change align to 4k for imx95
Change from v1 to v3
- new patches at v3
drivers/pci/controller/dwc/pci-imx6.c | 46 +++++++++++++++++++++++++++
1 file changed, 46 insertions(+)
diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index 3f474d4749dce..69ba72c3a9c9c 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -75,6 +75,7 @@ enum imx6_pcie_variants {
IMX8MQ_EP,
IMX8MM_EP,
IMX8MP_EP,
+ IMX95_EP,
};
#define IMX6_PCIE_FLAG_IMX6_PHY BIT(0)
@@ -84,6 +85,7 @@ enum imx6_pcie_variants {
#define IMX6_PCIE_FLAG_HAS_APP_RESET BIT(4)
#define IMX6_PCIE_FLAG_HAS_PHY_RESET BIT(5)
#define IMX6_PCIE_FLAG_HAS_SERDES BIT(6)
+#define IMX6_PCIE_FLAG_SUPPORT_64BIT BIT(7)
#define imx6_check_flag(pci, val) (pci->drvdata->flags & val)
@@ -616,6 +618,7 @@ static int imx6_pcie_enable_ref_clk(struct imx6_pcie *imx6_pcie)
break;
case IMX7D:
case IMX95:
+ case IMX95_EP:
break;
case IMX8MM:
case IMX8MM_EP:
@@ -1050,6 +1053,23 @@ static const struct pci_epc_features imx8m_pcie_epc_features = {
.align = SZ_64K,
};
+/*
+ * BAR# | Default BAR enable | Default BAR Type | Default BAR Size | BAR Sizing Scheme
+ * ================================================================================================
+ * BAR0 | Enable | 64-bit | 1 MB | Programmable Size
+ * BAR1 | Disable | 32-bit | 64 KB | Fixed Size
+ * | (If BAR0 is 64-bit) | (if BAR0 is 32-bit) | (if BAR0 is 32-bit) | As Bar0 is 64bit
+ * BAR2 | Enable | 32-bit | 1 MB | Programmable Size
+ * BAR3 | Enable | 32-bit | 64 KB | Programmable Size
+ * BAR4 | Enable | 32-bit | 1M | Programmable Size
+ * BAR5 | Enable | 32-bit | 64 KB | Programmable Size
+ */
+static const struct pci_epc_features imx95_pcie_epc_features = {
+ .msi_capable = true,
+ .bar_fixed_size[1] = SZ_64K,
+ .align = SZ_4K,
+};
+
static const struct pci_epc_features*
imx6_pcie_ep_get_features(struct dw_pcie_ep *ep)
{
@@ -1092,6 +1112,14 @@ static int imx6_add_pcie_ep(struct imx6_pcie *imx6_pcie,
pci->dbi_base2 = pci->dbi_base + pcie_dbi2_offset;
+ /*
+ * FIXME: dbi2 information should fetch from dtb file. dw_pcie_ep_init() can get dbi_base2
+ * from "dbi2" if pci->dbi_base2 is NULL. All code related pcie_dbi2_offset should be
+ * removed after all dts added "dbi2" reg.
+ */
+ if (imx6_pcie->drvdata->variant == IMX95_EP)
+ pci->dbi_base2 = NULL;
+
ret = dw_pcie_ep_init(ep);
if (ret) {
dev_err(dev, "failed to initialize endpoint\n");
@@ -1345,6 +1373,9 @@ static int imx6_pcie_probe(struct platform_device *pdev)
"unable to find iomuxc registers\n");
}
+ if (imx6_check_flag(imx6_pcie, IMX6_PCIE_FLAG_SUPPORT_64BIT))
+ dma_set_mask_and_coherent(dev, DMA_BIT_MASK(64));
+
/* Grab PCIe PHY Tx Settings */
if (of_property_read_u32(node, "fsl,tx-deemph-gen1",
&imx6_pcie->tx_deemph_gen1))
@@ -1567,6 +1598,20 @@ static const struct imx6_pcie_drvdata drvdata[] = {
.mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
.epc_features = &imx8m_pcie_epc_features,
},
+ [IMX95_EP] = {
+ .variant = IMX95_EP,
+ .flags = IMX6_PCIE_FLAG_HAS_SERDES |
+ IMX6_PCIE_FLAG_SUPPORT_64BIT,
+ .clk_names = imx6_4clks_bus_pcie_phy_aux,
+ .clks_cnt = ARRAY_SIZE(imx6_4clks_bus_pcie_phy_aux),
+ .ltssm_off = IMX95_PE0_GEN_CTRL_3,
+ .ltssm_mask = IMX95_PCIE_LTSSM_EN,
+ .mode_off[0] = IMX95_PE0_GEN_CTRL_1,
+ .mode_mask[0] = IMX95_PCIE_DEVICE_TYPE,
+ .init_phy = imx95_pcie_init_phy,
+ .epc_features = &imx95_pcie_epc_features,
+ .mode = DW_PCIE_EP_TYPE,
+ },
};
static const struct of_device_id imx6_pcie_of_match[] = {
@@ -1581,6 +1626,7 @@ static const struct of_device_id imx6_pcie_of_match[] = {
{ .compatible = "fsl,imx8mq-pcie-ep", .data = &drvdata[IMX8MQ_EP], },
{ .compatible = "fsl,imx8mm-pcie-ep", .data = &drvdata[IMX8MM_EP], },
{ .compatible = "fsl,imx8mp-pcie-ep", .data = &drvdata[IMX8MP_EP], },
+ { .compatible = "fsl,imx95-pcie-ep", .data = &drvdata[IMX95_EP], },
{},
};
--
2.34.1
next prev parent reply other threads:[~2024-01-08 23:23 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-01-08 23:21 [PATCH v8 00/16] PCI: imx6: Clean up and add imx95 pci support Frank Li
2024-01-08 23:21 ` [PATCH v8 01/16] PCI: imx6: Simplify clock handling by using clk_bulk*() function Frank Li
2024-01-19 8:17 ` Manivannan Sadhasivam
2024-01-08 23:21 ` [PATCH v8 02/16] PCI: imx6: Simplify phy handling by using IMX6_PCIE_FLAG_HAS_PHYDRV Frank Li
2024-01-19 8:21 ` Manivannan Sadhasivam
2024-01-08 23:21 ` [PATCH v8 03/16] PCI: imx6: Simplify reset handling by using by using *_FLAG_HAS_*_RESET Frank Li
2024-01-08 23:21 ` [PATCH v8 04/16] dt-bindings: imx6q-pcie: Add linux,pci-domain as required for iMX8MQ Frank Li
2024-01-09 18:24 ` Rob Herring
2024-01-09 18:24 ` Rob Herring
2024-01-08 23:21 ` [PATCH v8 05/16] PCI: imx6: Using "linux,pci-domain" as slot ID Frank Li
2024-01-08 23:21 ` [PATCH v8 06/16] PCI: imx6: Simplify ltssm_enable() by using ltssm_off and ltssm_mask Frank Li
2024-01-08 23:21 ` [PATCH v8 07/16] PCI: imx6: Simplify configure_type() by using mode_off and mode_mask Frank Li
2024-01-19 8:22 ` Manivannan Sadhasivam
2024-01-08 23:21 ` [PATCH v8 08/16] PCI: imx6: Simplify switch-case logic by involve init_phy callback Frank Li
2024-01-19 8:25 ` Manivannan Sadhasivam
2024-01-08 23:21 ` [PATCH v8 09/16] dt-bindings: imx6q-pcie: Clean up irrationality clocks check Frank Li
2024-01-08 23:21 ` [PATCH v8 10/16] dt-bindings: imx6q-pcie: restruct reg and reg-name Frank Li
2024-01-08 23:21 ` [PATCH v8 11/16] dt-bindings: imx6q-pcie: Add imx95 pcie compatible string Frank Li
2024-01-09 18:27 ` Rob Herring
2024-01-08 23:21 ` [PATCH v8 12/16] PCI: imx6: Add iMX95 PCIe Root Complex support Frank Li
2024-01-19 8:27 ` Manivannan Sadhasivam
2024-01-08 23:21 ` [PATCH v8 13/16] PCI: imx6: Clean up get addr_space code Frank Li
2024-01-08 23:21 ` [PATCH v8 14/16] PCI: imx6: Add epc_features in imx6_pcie_drvdata Frank Li
2024-01-08 23:21 ` [PATCH v8 15/16] dt-bindings: imx6q-pcie: Add iMX95 pcie endpoint compatible string Frank Li
2024-01-09 18:27 ` Rob Herring
2024-01-08 23:21 ` Frank Li [this message]
2024-01-19 8:36 ` [PATCH v8 16/16] PCI: imx6: Add iMX95 Endpoint (EP) support Manivannan Sadhasivam
2024-01-15 19:47 ` [PATCH v8 00/16] PCI: imx6: Clean up and add imx95 pci support Frank Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240108232145.2116455-17-Frank.Li@nxp.com \
--to=frank.li@nxp.com \
--cc=bhelgaas@google.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=helgaas@kernel.org \
--cc=hongxing.zhu@nxp.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=krzysztof.kozlowski@linaro.org \
--cc=kw@linux.com \
--cc=l.stach@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lpieralisi@kernel.org \
--cc=manivannan.sadhasivam@linaro.org \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox