[PATCH v2 2/4] dt-bindings: iio: hmc425a: add entry for LTC6373

[Dumitru Ceclan <mitrutzceclan@gmail.com>]

The LTC6373 is a silicon, 3-bit Fully-Differential digital instrumentation
amplifier that supports the following programmable gains (Vout/Vin):
 G = 0.25, 0.5, 1, 2, 4, 8, 16 + Shutdown.

Signed-off-by: Dumitru Ceclan <mitrutzceclan@gmail.com>
---
 .../bindings/iio/amplifiers/adi,hmc425a.yaml       | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml b/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml
index a434cb8ddcc9..3a470459b965 100644
--- a/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml
+++ b/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml
@@ -21,6 +21,8 @@ description: |
   HMC540S 1 dB LSB Silicon MMIC 4-Bit Digital Positive Control Attenuator, 0.1 - 8 GHz
     https://www.analog.com/media/en/technical-documentation/data-sheets/hmc540s.pdf
 
+  LTC6373 is a 3-Bit precision instrumentation amplifier with fully differential outputs
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ltc6373.pdf
 
 properties:
   compatible:
@@ -28,6 +30,7 @@ properties:
       - adi,adrf5740
       - adi,hmc425a
       - adi,hmc540s
+      - adi,ltc6373
 
   vcc-supply: true
 
@@ -38,6 +41,7 @@ properties:
         ADRF5740  - 4 GPIO connected to D2-D5
         HMC540S   - 4 GPIO connected to V1-V4
         HMC425A   - 6 GPIO connected to V1-V6
+        LTC6373   - 3 GPIO connected to A0-A2
     minItems: 1
     maxItems: 6
 
@@ -64,6 +68,16 @@ allOf:
         ctrl-gpios:
           minItems: 4
           maxItems: 4
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: adi,ltc6373
+    then:
+      properties:
+        ctrl-gpios:
+          minItems: 3
+          maxItems: 3
 
 required:
   - compatible
-- 
2.42.0