[PATCH 0/5] media: qcom: camss: Add sc8280xp support

[PATCH 0/5] media: qcom: camss: Add sc8280xp support

[Bryan O'Donoghue]

A minimal set of patches to switch on sc8280xp support in CAMSS
upstream. Most of the SoC dependencies are either merged - CAMCC or very
close to being merged - CAMSS/CCI dtsi.

Alot of prior work means we have far less interventions to make in this
driver to support this new SoC.

Most of this series is already reviewed however it is gated on merge of
the CAMSS compat string here =>

Link: https://lore.kernel.org/linux-arm-msm/20240111-linux-next-24-01-02-sc8280xp-camss-core-dtsi-v4-2-cdd5c57ff1dc@linaro.org/
Link: https://git.codelinaro.org/bryan.odonoghue/kernel/-/tree/linux-next-24-01-09-sc8280xp-camss-changes

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
Bryan O'Donoghue (5):
      media: qcom: camss: csiphy-3ph: Add Gen2 v1.1 two-phase MIPI CSI-2 DPHY init
      media: qcom: camss: Add CAMSS_SC8280XP enum
      media: qcom: camss: Add sc8280xp resources
      media: qcom: camss: Add sc8280xp support
      media: qcom: camss: vfe-17x: Rename camss-vfe-170 to camss-vfe-17x

 drivers/media/platform/qcom/camss/Makefile         |   2 +-
 .../platform/qcom/camss/camss-csiphy-3ph-1-0.c     | 108 +++++++-
 drivers/media/platform/qcom/camss/camss-csiphy.c   |   1 +
 .../camss/{camss-vfe-170.c => camss-vfe-17x.c}     |   0
 drivers/media/platform/qcom/camss/camss-vfe.c      |  25 +-
 drivers/media/platform/qcom/camss/camss-video.c    |   1 +
 drivers/media/platform/qcom/camss/camss.c          | 307 +++++++++++++++++++++
 drivers/media/platform/qcom/camss/camss.h          |   1 +
 8 files changed, 436 insertions(+), 9 deletions(-)
---
base-commit: cae3c85e8e3896c2a7db983290ca25933713cd0e
change-id: 20240111-linux-next-24-01-09-sc8280xp-camss-changes-8cf2bf9fcdd6

Best regards,
-- 
Bryan O'Donoghue <bryan.odonoghue@linaro.org>

[PATCH 1/5] media: qcom: camss: csiphy-3ph: Add Gen2 v1.1 two-phase MIPI CSI-2 DPHY init

[Bryan O'Donoghue]

Add a PHY configuration sequence for the sc8280xp which uses a Qualcomm
Gen 2 version 1.1 CSI-2 PHY.

The PHY can be configured as two phase or three phase in C-PHY or D-PHY
mode. This configuration supports two-phase D-PHY mode.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
 .../platform/qcom/camss/camss-csiphy-3ph-1-0.c     | 85 ++++++++++++++++++++++
 1 file changed, 85 insertions(+)

diff --git a/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c b/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c
index f50e2235c37f..66ff48aeab64 100644
--- a/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c
+++ b/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c
@@ -148,6 +148,91 @@ csiphy_reg_t lane_regs_sdm845[5][14] = {
 	},
 };
 
+/* GEN2 1.1 2PH */
+static const struct
+csiphy_reg_t lane_regs_sc8280xp[5][14] = {
+	{
+		{0x0004, 0x0C, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x002C, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x0034, 0x0F, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x001C, 0x0A, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x0014, 0x60, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x0028, 0x00, 0x00, CSIPHY_DNP_PARAMS},
+		{0x003C, 0xB8, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x0000, 0x90, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x0008, 0x0E, 0x00, CSIPHY_SETTLE_CNT_LOWER_BYTE},
+		{0x000C, 0x00, 0x00, CSIPHY_DNP_PARAMS},
+		{0x0010, 0x52, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x0038, 0xFE, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x0060, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x0064, 0x7F, 0x00, CSIPHY_DEFAULT_PARAMS},
+	},
+	{
+		{0x0704, 0x0C, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x072C, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x0734, 0x0F, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x071C, 0x0A, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x0714, 0x60, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x0728, 0x04, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x073C, 0xB8, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x0700, 0x80, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x0708, 0x0E, 0x00, CSIPHY_SETTLE_CNT_LOWER_BYTE},
+		{0x070C, 0xA5, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x0710, 0x52, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x0738, 0x1F, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x0760, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x0764, 0x7F, 0x00, CSIPHY_DEFAULT_PARAMS},
+	},
+	{
+		{0x0204, 0x0C, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x022C, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x0234, 0x0F, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x021C, 0x0A, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x0214, 0x60, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x0228, 0x00, 0x00, CSIPHY_DNP_PARAMS},
+		{0x023C, 0xB8, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x0200, 0x90, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x0208, 0x0E, 0x00, CSIPHY_SETTLE_CNT_LOWER_BYTE},
+		{0x020C, 0x00, 0x00, CSIPHY_DNP_PARAMS},
+		{0x0210, 0x52, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x0238, 0xFE, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x0260, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x0264, 0x7F, 0x00, CSIPHY_DEFAULT_PARAMS},
+	},
+	{
+		{0x0404, 0x0C, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x042C, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x0434, 0x0F, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x041C, 0x0A, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x0414, 0x60, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x0428, 0x00, 0x00, CSIPHY_DNP_PARAMS},
+		{0x043C, 0xB8, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x0400, 0x90, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x0408, 0x0E, 0x00, CSIPHY_SETTLE_CNT_LOWER_BYTE},
+		{0x040C, 0x00, 0x00, CSIPHY_DNP_PARAMS},
+		{0x0410, 0x52, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x0438, 0xFE, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x0460, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x0464, 0x7F, 0x00, CSIPHY_DEFAULT_PARAMS},
+	},
+	{
+		{0x0604, 0x0C, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x062C, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x0634, 0x0F, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x061C, 0x0A, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x0614, 0x60, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x0628, 0x00, 0x00, CSIPHY_DNP_PARAMS},
+		{0x063C, 0xB8, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x0600, 0x90, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x0608, 0x0E, 0x00, CSIPHY_SETTLE_CNT_LOWER_BYTE},
+		{0x060C, 0x00, 0x00, CSIPHY_DNP_PARAMS},
+		{0x0610, 0x52, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x0638, 0xFE, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x0660, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
+		{0x0664, 0x7F, 0x00, CSIPHY_DEFAULT_PARAMS},
+	},
+};
+
 /* GEN2 1.2.1 2PH */
 static const struct
 csiphy_reg_t lane_regs_sm8250[5][20] = {

-- 
2.42.0

[PATCH 2/5] media: qcom: camss: Add CAMSS_SC8280XP enum

[Bryan O'Donoghue]

Adds a CAMSS SoC identifier for the SC8280XP.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
 drivers/media/platform/qcom/camss/camss.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/media/platform/qcom/camss/camss.h b/drivers/media/platform/qcom/camss/camss.h
index a0c2dcc779f0..ac15fe23a702 100644
--- a/drivers/media/platform/qcom/camss/camss.h
+++ b/drivers/media/platform/qcom/camss/camss.h
@@ -77,6 +77,7 @@ enum camss_version {
 	CAMSS_660,
 	CAMSS_845,
 	CAMSS_8250,
+	CAMSS_8280XP,
 };
 
 enum icc_count {

-- 
2.42.0

[PATCH 3/5] media: qcom: camss: Add sc8280xp resources

[Bryan O'Donoghue]

This commit describes the hardware layout for the sc8280xp for the
following hardware blocks:

- 4 x VFE, 4 RDI per VFE
- 4 x VFE Lite, 4 RDI per VFE
- 4 x CSID
- 4 x CSID Lite
- 4 x CSI PHY

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>

---
Depends on:
Link: https://lore.kernel.org/linux-arm-msm/20240111-linux-next-24-01-02-sc8280xp-camss-core-dtsi-v4-2-cdd5c57ff1dc@linaro.org
---
 drivers/media/platform/qcom/camss/camss.c | 307 ++++++++++++++++++++++++++++++
 1 file changed, 307 insertions(+)

diff --git a/drivers/media/platform/qcom/camss/camss.c b/drivers/media/platform/qcom/camss/camss.c
index 58f4be660290..916fe4a83aa9 100644
--- a/drivers/media/platform/qcom/camss/camss.c
+++ b/drivers/media/platform/qcom/camss/camss.c
@@ -941,6 +941,298 @@ static const struct resources_icc icc_res_sm8250[] = {
 	},
 };
 
+static const struct camss_subdev_resources csiphy_res_sc8280xp[] = {
+	/* CSIPHY0 */
+	{
+		.regulators = {},
+		.clock = { "csiphy0", "csiphy0_timer" },
+		.clock_rate = { { 400000000 },
+				{ 300000000 } },
+		.reg = { "csiphy0" },
+		.interrupt = { "csiphy0" },
+		.ops = &csiphy_ops_3ph_1_0
+	},
+	/* CSIPHY1 */
+	{
+		.regulators = {},
+		.clock = { "csiphy1", "csiphy1_timer" },
+		.clock_rate = { { 400000000 },
+				{ 300000000 } },
+		.reg = { "csiphy1" },
+		.interrupt = { "csiphy1" },
+		.ops = &csiphy_ops_3ph_1_0
+	},
+	/* CSIPHY2 */
+	{
+		.regulators = {},
+		.clock = { "csiphy2", "csiphy2_timer" },
+		.clock_rate = { { 400000000 },
+				{ 300000000 } },
+		.reg = { "csiphy2" },
+		.interrupt = { "csiphy2" },
+		.ops = &csiphy_ops_3ph_1_0
+	},
+	/* CSIPHY3 */
+	{
+		.regulators = {},
+		.clock = { "csiphy3", "csiphy3_timer" },
+		.clock_rate = { { 400000000 },
+				{ 300000000 } },
+		.reg = { "csiphy3" },
+		.interrupt = { "csiphy3" },
+		.ops = &csiphy_ops_3ph_1_0
+	},
+};
+
+static const struct camss_subdev_resources csid_res_sc8280xp[] = {
+	/* CSID0 */
+	{
+		.regulators = { "vdda-phy", "vdda-pll" },
+		.clock = { "vfe0_csid", "vfe0_cphy_rx", "vfe0", "vfe0_axi" },
+		.clock_rate = { { 400000000, 480000000, 600000000 },
+				{ 0 },
+				{ 0 },
+				{ 0 } },
+		.reg = { "csid0" },
+		.interrupt = { "csid0" },
+		.ops = &csid_ops_gen2
+	},
+	/* CSID1 */
+	{
+		.regulators = { "vdda-phy", "vdda-pll" },
+		.clock = { "vfe1_csid", "vfe1_cphy_rx", "vfe1", "vfe1_axi" },
+		.clock_rate = { { 400000000, 480000000, 600000000 },
+				{ 0 },
+				{ 0 },
+				{ 0 } },
+		.reg = { "csid1" },
+		.interrupt = { "csid1" },
+		.ops = &csid_ops_gen2
+	},
+	/* CSID2 */
+	{
+		.regulators = { "vdda-phy", "vdda-pll" },
+		.clock = { "vfe2_csid", "vfe2_cphy_rx", "vfe2", "vfe2_axi" },
+		.clock_rate = { { 400000000, 480000000, 600000000 },
+				{ 0 },
+				{ 0 },
+				{ 0 } },
+		.reg = { "csid2" },
+		.interrupt = { "csid2" },
+		.ops = &csid_ops_gen2
+	},
+	/* CSID3 */
+	{
+		.regulators = { "vdda-phy", "vdda-pll" },
+		.clock = { "vfe3_csid", "vfe3_cphy_rx", "vfe3", "vfe3_axi" },
+		.clock_rate = { { 400000000, 480000000, 600000000 },
+				{ 0 },
+				{ 0 },
+				{ 0 } },
+		.reg = { "csid3" },
+		.interrupt = { "csid3" },
+		.ops = &csid_ops_gen2
+	},
+	/* CSID_LITE0 */
+	{
+		.regulators = { "vdda-phy", "vdda-pll" },
+		.clock = { "vfe_lite0_csid", "vfe_lite0_cphy_rx", "vfe_lite0" },
+		.clock_rate = { { 400000000, 480000000, 600000000 },
+				{ 0 },
+				{ 0 }, },
+		.reg = { "csid0_lite" },
+		.interrupt = { "csid0_lite" },
+		.is_lite = true,
+		.ops = &csid_ops_gen2
+	},
+	/* CSID_LITE1 */
+	{
+		.regulators = { "vdda-phy", "vdda-pll" },
+		.clock = { "vfe_lite1_csid", "vfe_lite1_cphy_rx", "vfe_lite1" },
+		.clock_rate = { { 400000000, 480000000, 600000000 },
+				{ 0 },
+				{ 0 }, },
+		.reg = { "csid1_lite" },
+		.interrupt = { "csid1_lite" },
+		.is_lite = true,
+		.ops = &csid_ops_gen2
+	},
+	/* CSID_LITE2 */
+	{
+		.regulators = { "vdda-phy", "vdda-pll" },
+		.clock = { "vfe_lite2_csid", "vfe_lite2_cphy_rx", "vfe_lite2" },
+		.clock_rate = { { 400000000, 480000000, 600000000 },
+				{ 0 },
+				{ 0 }, },
+		.reg = { "csid2_lite" },
+		.interrupt = { "csid2_lite" },
+		.is_lite = true,
+		.ops = &csid_ops_gen2
+	},
+	/* CSID_LITE3 */
+	{
+		.regulators = { "vdda-phy", "vdda-pll" },
+		.clock = { "vfe_lite3_csid", "vfe_lite3_cphy_rx", "vfe_lite3" },
+		.clock_rate = { { 400000000, 480000000, 600000000 },
+				{ 0 },
+				{ 0 }, },
+		.reg = { "csid3_lite" },
+		.interrupt = { "csid3_lite" },
+		.is_lite = true,
+		.ops = &csid_ops_gen2
+	}
+};
+
+static const struct camss_subdev_resources vfe_res_sc8280xp[] = {
+	/* IFE0 */
+	{
+		.regulators = {},
+		.clock = { "gcc_axi_hf", "gcc_axi_sf", "cpas_ahb", "camnoc_axi", "vfe0", "vfe0_axi" },
+		.clock_rate = { { 0 },
+				{ 0 },
+				{ 19200000, 80000000},
+				{ 19200000, 150000000, 266666667, 320000000, 400000000, 480000000 },
+				{ 400000000, 558000000, 637000000, 760000000 },
+				{ 0 }, },
+		.reg = { "vfe0" },
+		.interrupt = { "vfe0" },
+		.pd_name = "ife0",
+		.line_num = 4,
+		.ops = &vfe_ops_170
+	},
+	/* IFE1 */
+	{
+		.regulators = {},
+		.clock = { "gcc_axi_hf", "gcc_axi_sf", "cpas_ahb", "camnoc_axi", "vfe1", "vfe1_axi" },
+		.clock_rate = { { 0 },
+				{ 0 },
+				{ 19200000, 80000000},
+				{ 19200000, 150000000, 266666667, 320000000, 400000000, 480000000 },
+				{ 400000000, 558000000, 637000000, 760000000 },
+				{ 0 }, },
+		.reg = { "vfe1" },
+		.interrupt = { "vfe1" },
+		.pd_name = "ife1",
+		.line_num = 4,
+		.ops = &vfe_ops_170
+	},
+	/* IFE2 */
+	{
+		.regulators = {},
+		.clock = { "gcc_axi_hf", "gcc_axi_sf", "cpas_ahb", "camnoc_axi", "vfe2", "vfe2_axi" },
+		.clock_rate = { { 0 },
+				{ 0 },
+				{ 19200000, 80000000},
+				{ 19200000, 150000000, 266666667, 320000000, 400000000, 480000000 },
+				{ 400000000, 558000000, 637000000, 760000000 },
+				{ 0 }, },
+		.reg = { "vfe2" },
+		.interrupt = { "vfe2" },
+		.pd_name = "ife2",
+		.line_num = 4,
+		.ops = &vfe_ops_170
+	},
+	/* VFE3 */
+	{
+		.regulators = {},
+		.clock = { "gcc_axi_hf", "gcc_axi_sf", "cpas_ahb", "camnoc_axi", "vfe3", "vfe3_axi" },
+		.clock_rate = { { 0 },
+				{ 0 },
+				{ 19200000, 80000000},
+				{ 19200000, 150000000, 266666667, 320000000, 400000000, 480000000 },
+				{ 400000000, 558000000, 637000000, 760000000 },
+				{ 0 }, },
+		.reg = { "vfe3" },
+		.interrupt = { "vfe3" },
+		.pd_name = "ife3",
+		.line_num = 4,
+		.ops = &vfe_ops_170
+	},
+	/* IFE_LITE_0 */
+	{
+		.regulators = {},
+		.clock = { "gcc_axi_hf", "gcc_axi_sf", "cpas_ahb", "camnoc_axi", "vfe_lite0" },
+		.clock_rate = { { 0 },
+				{ 0 },
+				{ 19200000, 80000000},
+				{ 19200000, 150000000, 266666667, 320000000, 400000000, 480000000 },
+				{ 320000000, 400000000, 480000000, 600000000 }, },
+		.reg = { "vfe_lite0" },
+		.interrupt = { "vfe_lite0" },
+		.is_lite = true,
+		.line_num = 4,
+		.ops = &vfe_ops_170
+	},
+	/* IFE_LITE_1 */
+	{
+		.regulators = {},
+		.clock = { "gcc_axi_hf", "gcc_axi_sf", "cpas_ahb", "camnoc_axi", "vfe_lite1" },
+		.clock_rate = { { 0 },
+				{ 0 },
+				{ 19200000, 80000000},
+				{ 19200000, 150000000, 266666667, 320000000, 400000000, 480000000 },
+				{ 320000000, 400000000, 480000000, 600000000 }, },
+		.reg = { "vfe_lite1" },
+		.interrupt = { "vfe_lite1" },
+		.is_lite = true,
+		.line_num = 4,
+		.ops = &vfe_ops_170
+	},
+	/* IFE_LITE_2 */
+	{
+		.regulators = {},
+		.clock = { "gcc_axi_hf", "gcc_axi_sf", "cpas_ahb", "camnoc_axi", "vfe_lite2" },
+		.clock_rate = { { 0 },
+				{ 0 },
+				{ 19200000, 80000000},
+				{ 19200000, 150000000, 266666667, 320000000, 400000000, 480000000 },
+				{ 320000000, 400000000, 480000000, 600000000, }, },
+		.reg = { "vfe_lite2" },
+		.interrupt = { "vfe_lite2" },
+		.is_lite = true,
+		.line_num = 4,
+		.ops = &vfe_ops_170
+	},
+	/* VFE_LITE_3 */
+	{
+		.regulators = {},
+		.clock = { "gcc_axi_hf", "gcc_axi_sf", "cpas_ahb", "camnoc_axi", "vfe_lite3" },
+		.clock_rate = { { 0 },
+				{ 0 },
+				{ 19200000, 80000000},
+				{ 19200000, 150000000, 266666667, 320000000, 400000000, 480000000 },
+				{ 320000000, 400000000, 480000000, 600000000 }, },
+		.reg = { "vfe_lite3" },
+		.interrupt = { "vfe_lite3" },
+		.is_lite = true,
+		.line_num = 4,
+		.ops = &vfe_ops_170
+	},
+};
+
+static const struct resources_icc icc_res_sc8280xp[] = {
+	{
+		.name = "cam_ahb",
+		.icc_bw_tbl.avg = 150000,
+		.icc_bw_tbl.peak = 300000,
+	},
+	{
+		.name = "cam_hf_mnoc",
+		.icc_bw_tbl.avg = 2097152,
+		.icc_bw_tbl.peak = 2097152,
+	},
+	{
+		.name = "cam_sf_mnoc",
+		.icc_bw_tbl.avg = 2097152,
+		.icc_bw_tbl.peak = 2097152,
+	},
+	{
+		.name = "cam_sf_icp_mnoc",
+		.icc_bw_tbl.avg = 2097152,
+		.icc_bw_tbl.peak = 2097152,
+	},
+};
+
 /*
  * camss_add_clock_margin - Add margin to clock frequency rate
  * @rate: Clock frequency rate
@@ -1826,12 +2118,27 @@ static const struct camss_resources sm8250_resources = {
 	.vfe_num = ARRAY_SIZE(vfe_res_8250),
 };
 
+static const struct camss_resources sc8280xp_resources = {
+	.version = CAMSS_8280XP,
+	.pd_name = "top",
+	.csiphy_res = csiphy_res_sc8280xp,
+	.csid_res = csid_res_sc8280xp,
+	.ispif_res = NULL,
+	.vfe_res = vfe_res_sc8280xp,
+	.icc_res = icc_res_sc8280xp,
+	.icc_path_num = ARRAY_SIZE(icc_res_sc8280xp),
+	.csiphy_num = ARRAY_SIZE(csiphy_res_sc8280xp),
+	.csid_num = ARRAY_SIZE(csid_res_sc8280xp),
+	.vfe_num = ARRAY_SIZE(vfe_res_sc8280xp),
+};
+
 static const struct of_device_id camss_dt_match[] = {
 	{ .compatible = "qcom,msm8916-camss", .data = &msm8916_resources },
 	{ .compatible = "qcom,msm8996-camss", .data = &msm8996_resources },
 	{ .compatible = "qcom,sdm660-camss", .data = &sdm660_resources },
 	{ .compatible = "qcom,sdm845-camss", .data = &sdm845_resources },
 	{ .compatible = "qcom,sm8250-camss", .data = &sm8250_resources },
+	{ .compatible = "qcom,sc8280xp-camss", .data = &sc8280xp_resources },
 	{ }
 };
 

-- 
2.42.0

[PATCH 4/5] media: qcom: camss: Add sc8280xp support

[Bryan O'Donoghue]

Add in functional logic throughout the code to support the sc8280xp.

Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
 .../platform/qcom/camss/camss-csiphy-3ph-1-0.c     | 23 +++++++++++++++++---
 drivers/media/platform/qcom/camss/camss-csiphy.c   |  1 +
 drivers/media/platform/qcom/camss/camss-vfe.c      | 25 +++++++++++++++++-----
 drivers/media/platform/qcom/camss/camss-video.c    |  1 +
 4 files changed, 42 insertions(+), 8 deletions(-)

diff --git a/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c b/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c
index 66ff48aeab64..df7e93a5a4f6 100644
--- a/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c
+++ b/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c
@@ -513,6 +513,10 @@ static void csiphy_gen2_config_lanes(struct csiphy_device *csiphy,
 		r = &lane_regs_sm8250[0][0];
 		array_size = ARRAY_SIZE(lane_regs_sm8250[0]);
 		break;
+	case CAMSS_8280XP:
+		r = &lane_regs_sc8280xp[0][0];
+		array_size = ARRAY_SIZE(lane_regs_sc8280xp[0]);
+		break;
 	default:
 		WARN(1, "unknown cspi version\n");
 		return;
@@ -548,13 +552,26 @@ static u8 csiphy_get_lane_mask(struct csiphy_lanes_cfg *lane_cfg)
 	return lane_mask;
 }
 
+static bool csiphy_is_gen2(u32 version)
+{
+	bool ret = false;
+
+	switch (version) {
+	case CAMSS_845:
+	case CAMSS_8250:
+	case CAMSS_8280XP:
+		ret = true;
+		break;
+	}
+
+	return ret;
+}
+
 static void csiphy_lanes_enable(struct csiphy_device *csiphy,
 				struct csiphy_config *cfg,
 				s64 link_freq, u8 lane_mask)
 {
 	struct csiphy_lanes_cfg *c = &cfg->csi2->lane_cfg;
-	bool is_gen2 = (csiphy->camss->res->version == CAMSS_845 ||
-			csiphy->camss->res->version == CAMSS_8250);
 	u8 settle_cnt;
 	u8 val;
 	int i;
@@ -576,7 +593,7 @@ static void csiphy_lanes_enable(struct csiphy_device *csiphy,
 	val = 0x00;
 	writel_relaxed(val, csiphy->base + CSIPHY_3PH_CMN_CSI_COMMON_CTRLn(0));
 
-	if (is_gen2)
+	if (csiphy_is_gen2(csiphy->camss->res->version))
 		csiphy_gen2_config_lanes(csiphy, settle_cnt);
 	else
 		csiphy_gen1_config_lanes(csiphy, cfg, settle_cnt);
diff --git a/drivers/media/platform/qcom/camss/camss-csiphy.c b/drivers/media/platform/qcom/camss/camss-csiphy.c
index 264c99efeae8..45b3a8e5dea4 100644
--- a/drivers/media/platform/qcom/camss/camss-csiphy.c
+++ b/drivers/media/platform/qcom/camss/camss-csiphy.c
@@ -578,6 +578,7 @@ int msm_csiphy_subdev_init(struct camss *camss,
 		break;
 	case CAMSS_845:
 	case CAMSS_8250:
+	case CAMSS_8280XP:
 		csiphy->formats = csiphy_formats_sdm845;
 		csiphy->nformats = ARRAY_SIZE(csiphy_formats_sdm845);
 		break;
diff --git a/drivers/media/platform/qcom/camss/camss-vfe.c b/drivers/media/platform/qcom/camss/camss-vfe.c
index 2062be668f49..d875237cf244 100644
--- a/drivers/media/platform/qcom/camss/camss-vfe.c
+++ b/drivers/media/platform/qcom/camss/camss-vfe.c
@@ -225,6 +225,7 @@ static u32 vfe_src_pad_code(struct vfe_line *line, u32 sink_code,
 	case CAMSS_660:
 	case CAMSS_845:
 	case CAMSS_8250:
+	case CAMSS_8280XP:
 		switch (sink_code) {
 		case MEDIA_BUS_FMT_YUYV8_1X16:
 		{
@@ -1518,6 +1519,7 @@ int msm_vfe_subdev_init(struct camss *camss, struct vfe_device *vfe,
 			break;
 		case CAMSS_845:
 		case CAMSS_8250:
+		case CAMSS_8280XP:
 			l->formats = formats_rdi_845;
 			l->nformats = ARRAY_SIZE(formats_rdi_845);
 			break;
@@ -1595,6 +1597,23 @@ static const struct media_entity_operations vfe_media_ops = {
 	.link_validate = v4l2_subdev_link_validate,
 };
 
+static int vfe_bpl_align(struct vfe_device *vfe)
+{
+	int ret = 8;
+
+	switch (vfe->camss->res->version) {
+	case CAMSS_845:
+	case CAMSS_8250:
+	case CAMSS_8280XP:
+		ret = 16;
+		break;
+	default:
+		break;
+	}
+
+	return ret;
+}
+
 /*
  * msm_vfe_register_entities - Register subdev node for VFE module
  * @vfe: VFE device
@@ -1661,11 +1680,7 @@ int msm_vfe_register_entities(struct vfe_device *vfe,
 		}
 
 		video_out->ops = &vfe->video_ops;
-		if (vfe->camss->res->version == CAMSS_845 ||
-		    vfe->camss->res->version == CAMSS_8250)
-			video_out->bpl_alignment = 16;
-		else
-			video_out->bpl_alignment = 8;
+		video_out->bpl_alignment = vfe_bpl_align(vfe);
 		video_out->line_based = 0;
 		if (i == VFE_LINE_PIX) {
 			video_out->bpl_alignment = 16;
diff --git a/drivers/media/platform/qcom/camss/camss-video.c b/drivers/media/platform/qcom/camss/camss-video.c
index a89da5ef4710..54cd82f74115 100644
--- a/drivers/media/platform/qcom/camss/camss-video.c
+++ b/drivers/media/platform/qcom/camss/camss-video.c
@@ -1028,6 +1028,7 @@ int msm_video_register(struct camss_video *video, struct v4l2_device *v4l2_dev,
 		break;
 	case CAMSS_845:
 	case CAMSS_8250:
+	case CAMSS_8280XP:
 		video->formats = formats_rdi_845;
 		video->nformats = ARRAY_SIZE(formats_rdi_845);
 		break;

-- 
2.42.0

[PATCH 5/5] media: qcom: camss: vfe-17x: Rename camss-vfe-170 to camss-vfe-17x

[Bryan O'Donoghue]

vfe-170 and vfe-175 can be supported in the same file with some minimal
indirection to differentiate between the silicon versions.

sdm845 uses vfe-170, sc8280xp uses vfe-175-200. Lets rename the file to
capture its wider scope than vfe-170 only.

Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
 drivers/media/platform/qcom/camss/Makefile                             | 2 +-
 drivers/media/platform/qcom/camss/{camss-vfe-170.c => camss-vfe-17x.c} | 0
 2 files changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/platform/qcom/camss/Makefile b/drivers/media/platform/qcom/camss/Makefile
index 4e2222358973..0d4389ab312d 100644
--- a/drivers/media/platform/qcom/camss/Makefile
+++ b/drivers/media/platform/qcom/camss/Makefile
@@ -14,7 +14,7 @@ qcom-camss-objs += \
 		camss-vfe-4-1.o \
 		camss-vfe-4-7.o \
 		camss-vfe-4-8.o \
-		camss-vfe-170.o \
+		camss-vfe-17x.o \
 		camss-vfe-480.o \
 		camss-vfe-gen1.o \
 		camss-vfe.o \
diff --git a/drivers/media/platform/qcom/camss/camss-vfe-170.c b/drivers/media/platform/qcom/camss/camss-vfe-17x.c
similarity index 100%
rename from drivers/media/platform/qcom/camss/camss-vfe-170.c
rename to drivers/media/platform/qcom/camss/camss-vfe-17x.c

-- 
2.42.0

Re: [PATCH 0/5] media: qcom: camss: Add sc8280xp support

[Konrad Dybcio]

On 1/11/24 20:57, Bryan O'Donoghue wrote:
> A minimal set of patches to switch on sc8280xp support in CAMSS
> upstream. Most of the SoC dependencies are either merged - CAMCC or very
> close to being merged - CAMSS/CCI dtsi.
> 
> Alot of prior work means we have far less interventions to make in this
> driver to support this new SoC.
> 
> Most of this series is already reviewed however it is gated on merge of
> the CAMSS compat string here =>
> 
> Link: https://lore.kernel.org/linux-arm-msm/20240111-linux-next-24-01-02-sc8280xp-camss-core-dtsi-v4-2-cdd5c57ff1dc@linaro.org/
> Link: https://git.codelinaro.org/bryan.odonoghue/kernel/-/tree/linux-next-24-01-09-sc8280xp-camss-changes
> 
> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
> ---
What happened to the "vN" in the subject and the changelog?

Konrad

Re: [PATCH 0/5] media: qcom: camss: Add sc8280xp support

[Bryan O'Donoghue]

On 11/01/2024 20:13, Konrad Dybcio wrote:
> 
> 
> On 1/11/24 20:57, Bryan O'Donoghue wrote:
>> A minimal set of patches to switch on sc8280xp support in CAMSS
>> upstream. Most of the SoC dependencies are either merged - CAMCC or very
>> close to being merged - CAMSS/CCI dtsi.
>>
>> Alot of prior work means we have far less interventions to make in this
>> driver to support this new SoC.
>>
>> Most of this series is already reviewed however it is gated on merge of
>> the CAMSS compat string here =>
>>
>> Link: 
>> https://lore.kernel.org/linux-arm-msm/20240111-linux-next-24-01-02-sc8280xp-camss-core-dtsi-v4-2-cdd5c57ff1dc@linaro.org/
>> Link: 
>> https://git.codelinaro.org/bryan.odonoghue/kernel/-/tree/linux-next-24-01-09-sc8280xp-camss-changes
>>
>> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
>> ---
> What happened to the "vN" in the subject and the changelog?
> 
> Konrad

Hmm it "felt" like a new series

Checking though - yep this should be v5

https://lwn.net/Articles/950887/

I'll resend

---
bod

Re: [PATCH 3/5] media: qcom: camss: Add sc8280xp resources

[Konrad Dybcio]

On 1/11/24 20:57, Bryan O'Donoghue wrote:
> This commit describes the hardware layout for the sc8280xp for the
> following hardware blocks:
> 
> - 4 x VFE, 4 RDI per VFE
> - 4 x VFE Lite, 4 RDI per VFE
> - 4 x CSID
> - 4 x CSID Lite
> - 4 x CSI PHY
> 
> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
> 
> ---

[...]

> +static const struct camss_subdev_resources csiphy_res_sc8280xp[] = {
> +	/* CSIPHY0 */

Are there any cases where a platform has PHYs with different
capabilities? Might be another nice thing to clean up in the
future..

[...]

> +
> +static const struct camss_subdev_resources vfe_res_sc8280xp[] = {
> +	/* IFE0 */
> +	{
> +		.regulators = {},
> +		.clock = { "gcc_axi_hf", "gcc_axi_sf", "cpas_ahb", "camnoc_axi", "vfe0", "vfe0_axi" },

VFE->IFE?

> +		.clock_rate = { { 0 },
> +				{ 0 },
> +				{ 19200000, 80000000},

Missing space

Also, the source of this clock has shared_ops, which means it's
parked to XO on disable.. Is the first frequency here useful?

> +				{ 19200000, 150000000, 266666667, 320000000, 400000000, 480000000 },

Similar story here

> +				{ 400000000, 558000000, 637000000, 760000000 },

And you (perhaps correctly) omitted 19.2MHz here

Same story for all other IFE/_LITEs in this patch

> +
> +static const struct resources_icc icc_res_sc8280xp[] = {
> +	{
> +		.name = "cam_ahb",
> +		.icc_bw_tbl.avg = 150000,
> +		.icc_bw_tbl.peak = 300000,
> +	},
> +	{
> +		.name = "cam_hf_mnoc",
> +		.icc_bw_tbl.avg = 2097152,
> +		.icc_bw_tbl.peak = 2097152,
> +	},
> +	{
> +		.name = "cam_sf_mnoc",
> +		.icc_bw_tbl.avg = 2097152,
> +		.icc_bw_tbl.peak = 2097152,
> +	},
> +	{
> +		.name = "cam_sf_icp_mnoc",
> +		.icc_bw_tbl.avg = 2097152,
> +		.icc_bw_tbl.peak = 2097152,

Mbps_to_icc()?


>   static const struct of_device_id camss_dt_match[] = {
>   	{ .compatible = "qcom,msm8916-camss", .data = &msm8916_resources },
>   	{ .compatible = "qcom,msm8996-camss", .data = &msm8996_resources },
>   	{ .compatible = "qcom,sdm660-camss", .data = &sdm660_resources },
>   	{ .compatible = "qcom,sdm845-camss", .data = &sdm845_resources },
>   	{ .compatible = "qcom,sm8250-camss", .data = &sm8250_resources },
> +	{ .compatible = "qcom,sc8280xp-camss", .data = &sc8280xp_resources },
"sc" < "sd"

Konrad