public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Alex Lyakas <alex.lyakas@zadara.com>, Song Liu <song@kernel.org>,
	Sasha Levin <sashal@kernel.org>,
	linux-raid@vger.kernel.org
Subject: [PATCH AUTOSEL 6.7 081/108] md: Whenassemble the array, consult the superblock of the freshest device
Date: Tue, 16 Jan 2024 14:39:47 -0500	[thread overview]
Message-ID: <20240116194225.250921-81-sashal@kernel.org> (raw)
In-Reply-To: <20240116194225.250921-1-sashal@kernel.org>

From: Alex Lyakas <alex.lyakas@zadara.com>

[ Upstream commit dc1cc22ed58f11d58d8553c5ec5f11cbfc3e3039 ]

Upon assembling the array, both kernel and mdadm allow the devices to have event
counter difference of 1, and still consider them as up-to-date.
However, a device whose event count is behind by 1, may in fact not be up-to-date,
and array resync with such a device may cause data corruption.
To avoid this, consult the superblock of the freshest device about the status
of a device, whose event counter is behind by 1.

Signed-off-by: Alex Lyakas <alex.lyakas@zadara.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/1702470271-16073-1-git-send-email-alex.lyakas@zadara.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/md.c | 54 ++++++++++++++++++++++++++++++++++++++++---------
 1 file changed, 44 insertions(+), 10 deletions(-)

diff --git a/drivers/md/md.c b/drivers/md/md.c
index 9bdd57324c37..da33270971ab 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -1209,6 +1209,7 @@ struct super_type  {
 					  struct md_rdev *refdev,
 					  int minor_version);
 	int		    (*validate_super)(struct mddev *mddev,
+					      struct md_rdev *freshest,
 					      struct md_rdev *rdev);
 	void		    (*sync_super)(struct mddev *mddev,
 					  struct md_rdev *rdev);
@@ -1346,8 +1347,9 @@ static int super_90_load(struct md_rdev *rdev, struct md_rdev *refdev, int minor
 
 /*
  * validate_super for 0.90.0
+ * note: we are not using "freshest" for 0.9 superblock
  */
-static int super_90_validate(struct mddev *mddev, struct md_rdev *rdev)
+static int super_90_validate(struct mddev *mddev, struct md_rdev *freshest, struct md_rdev *rdev)
 {
 	mdp_disk_t *desc;
 	mdp_super_t *sb = page_address(rdev->sb_page);
@@ -1859,7 +1861,7 @@ static int super_1_load(struct md_rdev *rdev, struct md_rdev *refdev, int minor_
 	return ret;
 }
 
-static int super_1_validate(struct mddev *mddev, struct md_rdev *rdev)
+static int super_1_validate(struct mddev *mddev, struct md_rdev *freshest, struct md_rdev *rdev)
 {
 	struct mdp_superblock_1 *sb = page_address(rdev->sb_page);
 	__u64 ev1 = le64_to_cpu(sb->events);
@@ -1955,13 +1957,15 @@ static int super_1_validate(struct mddev *mddev, struct md_rdev *rdev)
 		}
 	} else if (mddev->pers == NULL) {
 		/* Insist of good event counter while assembling, except for
-		 * spares (which don't need an event count) */
-		++ev1;
+		 * spares (which don't need an event count).
+		 * Similar to mdadm, we allow event counter difference of 1
+		 * from the freshest device.
+		 */
 		if (rdev->desc_nr >= 0 &&
 		    rdev->desc_nr < le32_to_cpu(sb->max_dev) &&
 		    (le16_to_cpu(sb->dev_roles[rdev->desc_nr]) < MD_DISK_ROLE_MAX ||
 		     le16_to_cpu(sb->dev_roles[rdev->desc_nr]) == MD_DISK_ROLE_JOURNAL))
-			if (ev1 < mddev->events)
+			if (ev1 + 1 < mddev->events)
 				return -EINVAL;
 	} else if (mddev->bitmap) {
 		/* If adding to array with a bitmap, then we can accept an
@@ -1982,8 +1986,38 @@ static int super_1_validate(struct mddev *mddev, struct md_rdev *rdev)
 		    rdev->desc_nr >= le32_to_cpu(sb->max_dev)) {
 			role = MD_DISK_ROLE_SPARE;
 			rdev->desc_nr = -1;
-		} else
+		} else if (mddev->pers == NULL && freshest && ev1 < mddev->events) {
+			/*
+			 * If we are assembling, and our event counter is smaller than the
+			 * highest event counter, we cannot trust our superblock about the role.
+			 * It could happen that our rdev was marked as Faulty, and all other
+			 * superblocks were updated with +1 event counter.
+			 * Then, before the next superblock update, which typically happens when
+			 * remove_and_add_spares() removes the device from the array, there was
+			 * a crash or reboot.
+			 * If we allow current rdev without consulting the freshest superblock,
+			 * we could cause data corruption.
+			 * Note that in this case our event counter is smaller by 1 than the
+			 * highest, otherwise, this rdev would not be allowed into array;
+			 * both kernel and mdadm allow event counter difference of 1.
+			 */
+			struct mdp_superblock_1 *freshest_sb = page_address(freshest->sb_page);
+			u32 freshest_max_dev = le32_to_cpu(freshest_sb->max_dev);
+
+			if (rdev->desc_nr >= freshest_max_dev) {
+				/* this is unexpected, better not proceed */
+				pr_warn("md: %s: rdev[%pg]: desc_nr(%d) >= freshest(%pg)->sb->max_dev(%u)\n",
+						mdname(mddev), rdev->bdev, rdev->desc_nr,
+						freshest->bdev, freshest_max_dev);
+				return -EUCLEAN;
+			}
+
+			role = le16_to_cpu(freshest_sb->dev_roles[rdev->desc_nr]);
+			pr_debug("md: %s: rdev[%pg]: role=%d(0x%x) according to freshest %pg\n",
+				     mdname(mddev), rdev->bdev, role, role, freshest->bdev);
+		} else {
 			role = le16_to_cpu(sb->dev_roles[rdev->desc_nr]);
+		}
 		switch(role) {
 		case MD_DISK_ROLE_SPARE: /* spare */
 			break;
@@ -2890,7 +2924,7 @@ static int add_bound_rdev(struct md_rdev *rdev)
 		 * and should be added immediately.
 		 */
 		super_types[mddev->major_version].
-			validate_super(mddev, rdev);
+			validate_super(mddev, NULL/*freshest*/, rdev);
 		err = mddev->pers->hot_add_disk(mddev, rdev);
 		if (err) {
 			md_kick_rdev_from_array(rdev);
@@ -3827,7 +3861,7 @@ static int analyze_sbs(struct mddev *mddev)
 	}
 
 	super_types[mddev->major_version].
-		validate_super(mddev, freshest);
+		validate_super(mddev, NULL/*freshest*/, freshest);
 
 	i = 0;
 	rdev_for_each_safe(rdev, tmp, mddev) {
@@ -3842,7 +3876,7 @@ static int analyze_sbs(struct mddev *mddev)
 		}
 		if (rdev != freshest) {
 			if (super_types[mddev->major_version].
-			    validate_super(mddev, rdev)) {
+			    validate_super(mddev, freshest, rdev)) {
 				pr_warn("md: kicking non-fresh %pg from array!\n",
 					rdev->bdev);
 				md_kick_rdev_from_array(rdev);
@@ -6833,7 +6867,7 @@ int md_add_new_disk(struct mddev *mddev, struct mdu_disk_info_s *info)
 			rdev->saved_raid_disk = rdev->raid_disk;
 		} else
 			super_types[mddev->major_version].
-				validate_super(mddev, rdev);
+				validate_super(mddev, NULL/*freshest*/, rdev);
 		if ((info->state & (1<<MD_DISK_SYNC)) &&
 		     rdev->raid_disk != info->raid_disk) {
 			/* This was a hot-add request, but events doesn't
-- 
2.43.0


  parent reply	other threads:[~2024-01-16 19:46 UTC|newest]

Thread overview: 125+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-01-16 19:38 [PATCH AUTOSEL 6.7 001/108] wifi: rtw89: fix timeout calculation in rtw89_roc_end() Sasha Levin
2024-01-16 19:38 ` [PATCH AUTOSEL 6.7 002/108] wifi: rt2x00: restart beacon queue when hardware reset Sasha Levin
2024-01-16 19:38 ` [PATCH AUTOSEL 6.7 003/108] selftests/bpf: fix RELEASE=1 build for tc_opts Sasha Levin
2024-01-16 19:38 ` [PATCH AUTOSEL 6.7 004/108] selftests/bpf: satisfy compiler by having explicit return in btf test Sasha Levin
2024-01-16 19:38 ` [PATCH AUTOSEL 6.7 005/108] libbpf: Fix potential uninitialized tail padding with LIBBPF_OPTS_RESET Sasha Levin
2024-01-16 19:38 ` [PATCH AUTOSEL 6.7 006/108] selftests/bpf: Fix pyperf180 compilation failure with clang18 Sasha Levin
2024-01-16 19:38 ` [PATCH AUTOSEL 6.7 007/108] wifi: rt2x00: correct wrong BBP register in RxDCOC calibration Sasha Levin
2024-01-16 19:38 ` [PATCH AUTOSEL 6.7 008/108] selftests/bpf: Fix issues in setup_classid_environment() Sasha Levin
2024-01-16 19:38 ` [PATCH AUTOSEL 6.7 009/108] ARM: dts: qcom: strip prefix from PMIC files Sasha Levin
2024-01-16 19:38 ` [PATCH AUTOSEL 6.7 010/108] ARM: dts: qcom: apq8064: fix PMIC node labels Sasha Levin
2024-01-16 19:38 ` [PATCH AUTOSEL 6.7 011/108] ARM: dts: qcom: mdm9615: " Sasha Levin
2024-01-16 19:38 ` [PATCH AUTOSEL 6.7 012/108] ARM: dts: qcom: msm8660: " Sasha Levin
2024-01-16 19:38 ` [PATCH AUTOSEL 6.7 013/108] ARM: dts: qcom: msm8960: " Sasha Levin
2024-01-16 19:38 ` [PATCH AUTOSEL 6.7 014/108] soc: xilinx: Fix for call trace due to the usage of smp_processor_id() Sasha Levin
2024-01-16 19:38 ` [PATCH AUTOSEL 6.7 015/108] soc: xilinx: fix unhandled SGI warning message Sasha Levin
2024-01-16 19:38 ` [PATCH AUTOSEL 6.7 016/108] scsi: lpfc: Fix possible file string name overflow when updating firmware Sasha Levin
2024-01-16 19:38 ` [PATCH AUTOSEL 6.7 017/108] ARM: dts: samsung: exynos4: fix camera unit addresses/ranges Sasha Levin
2024-01-16 19:38 ` [PATCH AUTOSEL 6.7 018/108] ARM: dts: samsung: s5pv210: " Sasha Levin
2024-01-16 19:38 ` [PATCH AUTOSEL 6.7 019/108] net: phy: micrel: fix ts_info value in case of no phc Sasha Levin
2024-01-16 19:38 ` [PATCH AUTOSEL 6.7 020/108] PCI: Add no PM reset quirk for NVIDIA Spectrum devices Sasha Levin
2024-01-16 19:38 ` [PATCH AUTOSEL 6.7 021/108] r8169: improve RTL8411b phy-down fixup Sasha Levin
2024-01-17  1:43   ` Jakub Kicinski
2024-01-17 10:30     ` Mirsad Todorovac
2024-01-17 11:10       ` Heiner Kallweit
2024-01-17 13:44       ` Andrew Lunn
2024-01-17 16:35         ` Mirsad Todorovac
2024-01-17 17:04           ` Andrew Lunn
2024-01-16 19:38 ` [PATCH AUTOSEL 6.7 022/108] bonding: return -ENOMEM instead of BUG in alb_upper_dev_walk Sasha Levin
2024-01-16 19:38 ` [PATCH AUTOSEL 6.7 023/108] net: usb: ax88179_178a: avoid two consecutive device resets Sasha Levin
2024-01-16 19:38 ` [PATCH AUTOSEL 6.7 024/108] wifi: ieee80211: fix PV1 frame control field name Sasha Levin
2024-01-16 19:38 ` [PATCH AUTOSEL 6.7 025/108] scsi: mpi3mr: Add support for SAS5116 PCI IDs Sasha Levin
2024-01-16 19:38 ` [PATCH AUTOSEL 6.7 026/108] scsi: mpi3mr: Add PCI checks where SAS5116 diverges from SAS4116 Sasha Levin
2024-01-16 19:38 ` [PATCH AUTOSEL 6.7 027/108] scsi: arcmsr: Support new PCI device IDs 1883 and 1886 Sasha Levin
2024-01-16 19:38 ` [PATCH AUTOSEL 6.7 028/108] ARM: dts: imx7d: Fix coresight funnel ports Sasha Levin
2024-01-16 19:38 ` [PATCH AUTOSEL 6.7 029/108] ARM: dts: imx7s: Fix lcdif compatible Sasha Levin
2024-01-16 19:38 ` [PATCH AUTOSEL 6.7 030/108] ARM: dts: imx7s: Fix nand-controller #size-cells Sasha Levin
2024-01-16 19:38 ` [PATCH AUTOSEL 6.7 031/108] bpf: Fix a few selftest failures due to llvm18 change Sasha Levin
2024-01-16 19:38 ` [PATCH AUTOSEL 6.7 032/108] wifi: ath9k: Fix potential array-index-out-of-bounds read in ath9k_htc_txstatus() Sasha Levin
2024-01-16 19:38 ` [PATCH AUTOSEL 6.7 033/108] wifi: ath11k: fix race due to setting ATH11K_FLAG_EXT_IRQ_ENABLED too early Sasha Levin
2024-01-16 19:39 ` [PATCH AUTOSEL 6.7 034/108] wifi: rtw89: fix not entering PS mode after AP stops Sasha Levin
2024-01-16 19:39 ` [PATCH AUTOSEL 6.7 035/108] wifi: rtw89: fix misbehavior of TX beacon in concurrent mode Sasha Levin
2024-01-16 19:39 ` [PATCH AUTOSEL 6.7 036/108] bnxt_en: Add 5760X (P7) PCI IDs Sasha Levin
2024-01-16 19:47   ` Michael Chan
2024-01-30 21:44     ` Sasha Levin
2024-01-16 19:39 ` [PATCH AUTOSEL 6.7 037/108] bpf: Check rcu_read_lock_trace_held() before calling bpf map helpers Sasha Levin
2024-01-16 19:39 ` [PATCH AUTOSEL 6.7 038/108] bpf: Add map and need_defer parameters to .map_fd_put_ptr() Sasha Levin
2024-01-16 19:39 ` [PATCH AUTOSEL 6.7 039/108] bpf: Set need_defer as false when clearing fd array during map free Sasha Levin
2024-01-16 19:39 ` [PATCH AUTOSEL 6.7 040/108] wifi: ath12k: fix and enable AP mode for WCN7850 Sasha Levin
2024-01-16 19:39 ` [PATCH AUTOSEL 6.7 041/108] scsi: libfc: Don't schedule abort twice Sasha Levin
2024-01-16 19:39 ` [PATCH AUTOSEL 6.7 042/108] scsi: libfc: Fix up timeout error in fc_fcp_rec_error() Sasha Levin
2024-01-16 19:39 ` [PATCH AUTOSEL 6.7 043/108] net: mvmdio: Avoid excessive sleeps in polled mode Sasha Levin
2024-01-17  1:42   ` Jakub Kicinski
2024-01-17  1:54     ` Andrew Lunn
2024-01-16 19:39 ` [PATCH AUTOSEL 6.7 044/108] usb: typec: ucsi: fix UCSI on buggy Qualcomm devices Sasha Levin
2024-01-17  8:04   ` Johan Hovold
2024-01-17 12:17     ` Dmitry Baryshkov
2024-01-17 12:51       ` Johan Hovold
2024-01-17 16:04       ` Greg KH
2024-01-16 19:39 ` [PATCH AUTOSEL 6.7 045/108] arm64: dts: qcom: sm8550: fix soundwire controllers node name Sasha Levin
2024-01-16 19:39 ` [PATCH AUTOSEL 6.7 046/108] arm64: dts: qcom: sm8450: " Sasha Levin
2024-01-16 19:39 ` [PATCH AUTOSEL 6.7 047/108] arm64: dts: qcom: sm8350: Fix remoteproc interrupt type Sasha Levin
2024-01-16 19:39 ` [PATCH AUTOSEL 6.7 048/108] wifi: mt76: connac: fix EHT phy mode check Sasha Levin
2024-01-16 19:39 ` [PATCH AUTOSEL 6.7 049/108] wifi: mt76: mt7996: add PCI IDs for mt7992 Sasha Levin
2024-01-16 19:39 ` [PATCH AUTOSEL 6.7 050/108] net: wangxun: fix changing mac failed when running Sasha Levin
2024-01-17  1:39   ` Jakub Kicinski
2024-01-30 22:51     ` Sasha Levin
2024-01-16 19:39 ` [PATCH AUTOSEL 6.7 051/108] bpf: Guard stack limits against 32bit overflow Sasha Levin
2024-01-16 19:39 ` [PATCH AUTOSEL 6.7 052/108] bpf: Set uattr->batch.count as zero before batched update or deletion Sasha Levin
2024-01-16 19:39 ` [PATCH AUTOSEL 6.7 053/108] wifi: wfx: fix possible NULL pointer dereference in wfx_set_mfp_ap() Sasha Levin
2024-01-16 19:39 ` [PATCH AUTOSEL 6.7 054/108] wifi: ath12k: fix the issue that the multicast/broadcast indicator is not read correctly for WCN7850 Sasha Levin
2024-01-16 19:39 ` [PATCH AUTOSEL 6.7 055/108] ARM: dts: rockchip: fix rk3036 hdmi ports node Sasha Levin
2024-01-16 19:39 ` [PATCH AUTOSEL 6.7 056/108] ARM: dts: imx25/27-eukrea: Fix RTC node name Sasha Levin
2024-01-16 19:39 ` [PATCH AUTOSEL 6.7 057/108] ARM: dts: imx: Use flash@0,0 pattern Sasha Levin
2024-01-16 19:39 ` [PATCH AUTOSEL 6.7 058/108] ARM: dts: imx27: Fix sram node Sasha Levin
2024-01-16 19:39 ` [PATCH AUTOSEL 6.7 059/108] ARM: dts: imx1: " Sasha Levin
2024-01-16 19:39 ` [PATCH AUTOSEL 6.7 060/108] net: phy: at803x: fix passing the wrong reference for config_intr Sasha Levin
2024-01-16 19:39 ` [PATCH AUTOSEL 6.7 061/108] ionic: pass opcode to devcmd_wait Sasha Levin
2024-01-16 19:39 ` [PATCH AUTOSEL 6.7 062/108] ionic: bypass firmware cmds when stuck in reset Sasha Levin
2024-01-16 19:39 ` [PATCH AUTOSEL 6.7 063/108] block/rnbd-srv: Check for unlikely string overflow Sasha Levin
2024-01-16 19:39 ` [PATCH AUTOSEL 6.7 064/108] arm64: zynqmp: Move fixed clock to / for kv260 Sasha Levin
2024-01-16 19:39 ` [PATCH AUTOSEL 6.7 065/108] arm64: zynqmp: Fix clock node name in kv260 cards Sasha Levin
2024-01-16 19:39 ` [PATCH AUTOSEL 6.7 066/108] selftests/bpf: fix compiler warnings in RELEASE=1 mode Sasha Levin
2024-01-16 19:39 ` [PATCH AUTOSEL 6.7 067/108] ARM: dts: imx25: Fix the iim compatible string Sasha Levin
2024-01-16 19:39 ` [PATCH AUTOSEL 6.7 068/108] ARM: dts: imx25/27: Pass timing0 Sasha Levin
2024-01-16 19:39 ` [PATCH AUTOSEL 6.7 069/108] ARM: dts: imx27-apf27dev: Fix LED name Sasha Levin
2024-01-16 19:39 ` [PATCH AUTOSEL 6.7 070/108] ARM: dts: imx23-sansa: Use preferred i2c-gpios properties Sasha Levin
2024-01-16 19:39 ` [PATCH AUTOSEL 6.7 071/108] ARM: dts: imx23/28: Fix the DMA controller node name Sasha Levin
2024-01-16 19:39 ` [PATCH AUTOSEL 6.7 072/108] scsi: lpfc: Reinitialize an NPIV's VMID data structures after FDISC Sasha Levin
2024-01-16 19:39 ` [PATCH AUTOSEL 6.7 073/108] scsi: lpfc: Move determination of vmid_flag after VMID reinitialization completes Sasha Levin
2024-01-16 19:39 ` [PATCH AUTOSEL 6.7 074/108] scsi: hisi_sas: Set .phy_attached before notifing phyup event HISI_PHYE_PHY_UP_PM Sasha Levin
2024-01-16 19:39 ` [PATCH AUTOSEL 6.7 075/108] ice: fix ICE_AQ_VSI_Q_OPT_RSS_* register values Sasha Levin
2024-01-16 19:39 ` [PATCH AUTOSEL 6.7 076/108] net: atlantic: eliminate double free in error handling logic Sasha Levin
2024-01-17  1:38   ` Jakub Kicinski
2024-01-16 19:39 ` [PATCH AUTOSEL 6.7 077/108] net: dsa: mv88e6xxx: Fix mv88e6352_serdes_get_stats error path Sasha Levin
2024-01-16 19:39 ` [PATCH AUTOSEL 6.7 078/108] ARM: dts: marvell: Fix some common switch mistakes Sasha Levin
2024-01-16 19:39 ` [PATCH AUTOSEL 6.7 079/108] ARM64: " Sasha Levin
2024-01-16 19:39 ` [PATCH AUTOSEL 6.7 080/108] block: prevent an integer overflow in bvec_try_merge_hw_page Sasha Levin
2024-01-16 19:39 ` Sasha Levin [this message]
2024-01-16 19:39 ` [PATCH AUTOSEL 6.7 082/108] cfi: Add CFI_NOSEAL() Sasha Levin
2024-01-16 19:39 ` [PATCH AUTOSEL 6.7 083/108] x86/cfi,bpf: Fix bpf_exception_cb() signature Sasha Levin
2024-01-16 19:39 ` [PATCH AUTOSEL 6.7 084/108] arm64: dts: qcom: msm8996: Fix 'in-ports' is a required property Sasha Levin
2024-01-16 19:39 ` [PATCH AUTOSEL 6.7 085/108] arm64: dts: qcom: msm8998: Fix 'out-ports' " Sasha Levin
2024-01-16 19:39 ` [PATCH AUTOSEL 6.7 086/108] arm64: dts: qcom: Fix coresight warnings in in-ports and out-ports Sasha Levin
2024-01-16 19:39 ` [PATCH AUTOSEL 6.7 087/108] intel: add bit macro includes where needed Sasha Levin
2024-01-16 19:39 ` [PATCH AUTOSEL 6.7 088/108] ice: fix pre-shifted bit usage Sasha Levin
2024-01-16 19:39 ` [PATCH AUTOSEL 6.7 089/108] arm64: dts: amlogic: fix format for s4 uart node Sasha Levin
2024-01-16 19:39 ` [PATCH AUTOSEL 6.7 090/108] wifi: rtl8xxxu: Add additional USB IDs for RTL8192EU devices Sasha Levin
2024-01-16 19:39 ` [PATCH AUTOSEL 6.7 091/108] wifi: rtw89: coex: Fix wrong Wi-Fi role info and FDDT parameter members Sasha Levin
2024-01-16 19:39 ` [PATCH AUTOSEL 6.7 092/108] libbpf: Fix NULL pointer dereference in bpf_object__collect_prog_relos Sasha Levin
2024-01-16 19:39 ` [PATCH AUTOSEL 6.7 093/108] wifi: rtlwifi: add calculate_bit_shift() Sasha Levin
2024-01-16 19:40 ` [PATCH AUTOSEL 6.7 094/108] wifi: rtlwifi: rtl8723{be,ae}: using calculate_bit_shift() Sasha Levin
2024-01-16 19:40 ` [PATCH AUTOSEL 6.7 095/108] wifi: cfg80211: free beacon_ies when overridden from hidden BSS Sasha Levin
2024-01-16 19:40 ` [PATCH AUTOSEL 6.7 096/108] Bluetooth: qca: Set both WIDEBAND_SPEECH and LE_STATES quirks for QCA2066 Sasha Levin
2024-01-16 19:40 ` [PATCH AUTOSEL 6.7 097/108] Bluetooth: ISO: Avoid creating child socket if PA sync is terminating Sasha Levin
2024-01-16 19:40 ` [PATCH AUTOSEL 6.7 098/108] Bluetooth: hci_sync: fix BR/EDR wakeup bug Sasha Levin
2024-01-16 19:40 ` [PATCH AUTOSEL 6.7 099/108] Bluetooth: L2CAP: Fix possible multiple reject send Sasha Levin
2024-01-16 19:40 ` [PATCH AUTOSEL 6.7 100/108] net/smc: disable SEID on non-s390 archs where virtual ISM may be used Sasha Levin
2024-01-16 19:40 ` [PATCH AUTOSEL 6.7 101/108] bridge: cfm: fix enum typo in br_cc_ccm_tx_parse Sasha Levin
2024-01-16 19:40 ` [PATCH AUTOSEL 6.7 102/108] arm64: dts: sprd: Add clock reference for pll2 on UMS512 Sasha Levin
2024-01-16 19:40 ` [PATCH AUTOSEL 6.7 103/108] arm64: dts: sprd: Change UMS512 idle-state nodename to match bindings Sasha Levin
2024-01-16 19:40 ` [PATCH AUTOSEL 6.7 104/108] i40e: Fix VF disable behavior to block all traffic Sasha Levin
2024-01-16 19:40 ` [PATCH AUTOSEL 6.7 105/108] octeontx2-af: Fix max NPC MCAM entry check while validating ref_entry Sasha Levin
2024-01-16 19:40 ` [PATCH AUTOSEL 6.7 106/108] net: kcm: fix direct access to bv_len Sasha Levin
2024-01-16 19:40 ` [PATCH AUTOSEL 6.7 107/108] net: dsa: qca8k: put MDIO bus OF node on qca8k_mdio_register() failure Sasha Levin
2024-01-16 19:40 ` [PATCH AUTOSEL 6.7 108/108] ARM: dts: usr8200: Fix phy registers Sasha Levin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240116194225.250921-81-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=alex.lyakas@zadara.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-raid@vger.kernel.org \
    --cc=song@kernel.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox