From: Thomas Gleixner <tglx@linutronix.de>
To: LKML <linux-kernel@vger.kernel.org>
Cc: x86@kernel.org, Tom Lendacky <thomas.lendacky@amd.com>,
Andrew Cooper <andrew.cooper3@citrix.com>,
Arjan van de Ven <arjan@linux.intel.com>,
Huang Rui <ray.huang@amd.com>, Juergen Gross <jgross@suse.com>,
Dimitri Sivanich <dimitri.sivanich@hpe.com>,
Sohil Mehta <sohil.mehta@intel.com>,
K Prateek Nayak <kprateek.nayak@amd.com>,
Kan Liang <kan.liang@linux.intel.com>,
Zhang Rui <rui.zhang@intel.com>,
"Paul E. McKenney" <paulmck@kernel.org>,
Feng Tang <feng.tang@intel.com>,
Andy Shevchenko <andy@infradead.org>,
Michael Kelley <mhklinux@outlook.com>,
"Peter Zijlstra (Intel)" <peterz@infradead.org>,
Andy Shevchenko <andy.shevchenko@gmail.com>,
Wei Liu <wei.liu@kernel.org>
Subject: [patch V2 04/22] x86/apic: Get rid of get_physical_broadcast()
Date: Tue, 23 Jan 2024 14:10:08 +0100 (CET) [thread overview]
Message-ID: <20240117124902.600583242@linutronix.de> (raw)
In-Reply-To: 20240117124704.044462658@linutronix.de
From: Thomas Gleixner <tglx@linutronix.de>
There is no point for this function. The only case where this is used is
when there is no XAPIC available, which means the broadcast address is 0xF.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Shevchenko <andy@infradead.org>
---
arch/x86/kernel/apic/apic.c | 10 --------
arch/x86/kernel/apic/io_apic.c | 47 ++++++++++++++++++-----------------------
2 files changed, 21 insertions(+), 36 deletions(-)
---
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -261,16 +261,6 @@ u64 native_apic_icr_read(void)
return icr1 | ((u64)icr2 << 32);
}
-#ifdef CONFIG_X86_32
-/**
- * get_physical_broadcast - Get number of physical broadcast IDs
- */
-int get_physical_broadcast(void)
-{
- return modern_apic() ? 0xff : 0xf;
-}
-#endif
-
/**
* lapic_get_maxlvt - get the maximum number of local vector table entries
*/
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -1460,12 +1460,12 @@ void restore_boot_irq_mode(void)
*/
static void __init setup_ioapic_ids_from_mpc_nocheck(void)
{
- union IO_APIC_reg_00 reg_00;
physid_mask_t phys_id_present_map;
- int ioapic_idx;
- int i;
+ const u32 broadcast_id = 0xF;
+ union IO_APIC_reg_00 reg_00;
unsigned char old_id;
unsigned long flags;
+ int ioapic_idx, i;
/*
* This is broken; anything with a real cpu count has to
@@ -1484,11 +1484,10 @@ static void __init setup_ioapic_ids_from
old_id = mpc_ioapic_id(ioapic_idx);
- if (mpc_ioapic_id(ioapic_idx) >= get_physical_broadcast()) {
- printk(KERN_ERR "BIOS bug, IO-APIC#%d ID is %d in the MPC table!...\n",
- ioapic_idx, mpc_ioapic_id(ioapic_idx));
- printk(KERN_ERR "... fixing up to %d. (tell your hw vendor)\n",
- reg_00.bits.ID);
+ if (mpc_ioapic_id(ioapic_idx) >= broadcast_id) {
+ pr_err(FW_BUG "IO-APIC#%d ID is %d in the MPC table!...\n",
+ ioapic_idx, mpc_ioapic_id(ioapic_idx));
+ pr_err("... fixing up to %d. (tell your hw vendor)\n", reg_00.bits.ID);
ioapics[ioapic_idx].mp_config.apicid = reg_00.bits.ID;
}
@@ -1499,15 +1498,14 @@ static void __init setup_ioapic_ids_from
*/
if (apic->check_apicid_used(&phys_id_present_map,
mpc_ioapic_id(ioapic_idx))) {
- printk(KERN_ERR "BIOS bug, IO-APIC#%d ID %d is already used!...\n",
+ pr_err(FW_BUG "IO-APIC#%d ID %d is already used!...\n",
ioapic_idx, mpc_ioapic_id(ioapic_idx));
- for (i = 0; i < get_physical_broadcast(); i++)
+ for (i = 0; i < broadcast_id; i++)
if (!physid_isset(i, phys_id_present_map))
break;
- if (i >= get_physical_broadcast())
+ if (i >= broadcast_id)
panic("Max APIC ID exceeded!\n");
- printk(KERN_ERR "... fixing up to %d. (tell your hw vendor)\n",
- i);
+ pr_err("... fixing up to %d. (tell your hw vendor)\n", i);
physid_set(i, phys_id_present_map);
ioapics[ioapic_idx].mp_config.apicid = i;
} else {
@@ -2209,7 +2207,7 @@ static inline void __init check_timer(vo
* 8259A.
*/
if (pin1 == -1) {
- panic_if_irq_remap("BIOS bug: timer not connected to IO-APIC");
+ panic_if_irq_remap(FW_BUG "Timer not connected to IO-APIC");
pin1 = pin2;
apic1 = apic2;
no_pin1 = 1;
@@ -2495,6 +2493,7 @@ unsigned int arch_dynirq_lower_bound(uns
static int io_apic_get_unique_id(int ioapic, int apic_id)
{
static physid_mask_t apic_id_map = PHYSID_MASK_NONE;
+ const u32 broadcast_id = 0xF;
union IO_APIC_reg_00 reg_00;
unsigned long flags;
int i = 0;
@@ -2515,9 +2514,9 @@ static int io_apic_get_unique_id(int ioa
reg_00.raw = io_apic_read(ioapic, 0);
raw_spin_unlock_irqrestore(&ioapic_lock, flags);
- if (apic_id >= get_physical_broadcast()) {
- printk(KERN_WARNING "IOAPIC[%d]: Invalid apic_id %d, trying "
- "%d\n", ioapic, apic_id, reg_00.bits.ID);
+ if (apic_id >= broadcast_id) {
+ pr_warn("IOAPIC[%d]: Invalid apic_id %d, trying %d\n",
+ ioapic, apic_id, reg_00.bits.ID);
apic_id = reg_00.bits.ID;
}
@@ -2527,17 +2526,15 @@ static int io_apic_get_unique_id(int ioa
*/
if (apic->check_apicid_used(&apic_id_map, apic_id)) {
- for (i = 0; i < get_physical_broadcast(); i++) {
+ for (i = 0; i < broadcast_id; i++) {
if (!apic->check_apicid_used(&apic_id_map, i))
break;
}
- if (i == get_physical_broadcast())
+ if (i == broadcast_id)
panic("Max apic_id exceeded!\n");
- printk(KERN_WARNING "IOAPIC[%d]: apic_id %d already used, "
- "trying %d\n", ioapic, apic_id, i);
-
+ pr_warn("IOAPIC[%d]: apic_id %d already used, trying %d\n", ioapic, apic_id, i);
apic_id = i;
}
@@ -2567,11 +2564,9 @@ static int io_apic_get_unique_id(int ioa
static u8 io_apic_unique_id(int idx, u8 id)
{
- if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) &&
- !APIC_XAPIC(boot_cpu_apic_version))
+ if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) && !APIC_XAPIC(boot_cpu_apic_version))
return io_apic_get_unique_id(idx, id);
- else
- return id;
+ return id;
}
#else
static u8 io_apic_unique_id(int idx, u8 id)
next prev parent reply other threads:[~2024-01-23 13:10 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-01-23 13:10 [patch V2 00/22] x86/topology: More cleanups and preparatory work Thomas Gleixner
2024-01-23 13:10 ` [patch V2 01/22] x86/cpu/topology: Make the APIC mismatch warnings complete Thomas Gleixner
2024-01-25 9:53 ` Ashok Raj
2024-02-12 15:39 ` Thomas Gleixner
2024-01-23 13:10 ` [patch V2 02/22] x86/platform/ce4100: Dont override x86_init.mpparse.setup_ioapic_ids Thomas Gleixner
2024-01-23 13:10 ` [patch V2 03/22] x86/ioapic: Replace some more set bit nonsense Thomas Gleixner
2024-01-23 13:10 ` Thomas Gleixner [this message]
2024-02-01 22:24 ` [patch V2 04/22] x86/apic: Get rid of get_physical_broadcast() Sohil Mehta
2024-01-23 13:10 ` [patch V2 05/22] x86/ioapic: Make io_apic_get_unique_id() simpler Thomas Gleixner
2024-01-23 13:10 ` [patch V2 06/22] x86/ioapic: Simplify setup_ioapic_ids_from_mpc_nocheck() Thomas Gleixner
2024-01-23 13:10 ` [patch V2 07/22] x86/apic: Remove check_apicid_used() and ioapic_phys_id_map() Thomas Gleixner
2024-01-23 13:10 ` [patch V2 08/22] x86/mpparse: Rename default_find_smp_config() Thomas Gleixner
2024-01-23 13:10 ` [patch V2 09/22] x86/mpparse: Provide separate early/late callbacks Thomas Gleixner
2024-01-23 13:10 ` [patch V2 10/22] x86/mpparse: Prepare for callback separation Thomas Gleixner
2024-01-23 13:10 ` [patch V2 11/22] x86/dtb: Rename x86_dtb_init() Thomas Gleixner
2024-01-23 13:10 ` [patch V2 12/22] x86/platform/ce4100: Prepare for separate mpparse callbacks Thomas Gleixner
2024-01-23 13:10 ` [patch V2 13/22] x86/platform/intel-mid: " Thomas Gleixner
2024-01-23 13:10 ` [patch V2 14/22] x86/jailhouse: " Thomas Gleixner
2024-01-23 13:10 ` [patch V2 15/22] x86/xen/smp_pv: " Thomas Gleixner
2024-01-23 13:10 ` [patch V2 16/22] x86/hyperv/vtl: " Thomas Gleixner
2024-01-23 13:10 ` [patch V2 17/22] x86/mpparse: Switch to new init callbacks Thomas Gleixner
2024-01-23 13:10 ` [patch V2 18/22] x86/mm/numa: Move early mptable evaluation into common code Thomas Gleixner
2024-01-23 13:10 ` [patch V2 19/22] x86/mpparse: Remove the physid_t bitmap wrapper Thomas Gleixner
2024-01-23 13:10 ` [patch V2 20/22] x86/apic: Remove the pointless writeback of boot_cpu_physical_apicid Thomas Gleixner
2024-01-23 13:10 ` [patch V2 21/22] x86/apic: Remove yet another dubious callback Thomas Gleixner
2024-01-23 13:10 ` [patch V2 22/22] x86/apic: Use a proper define for invalid ACPI CPU ID Thomas Gleixner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240117124902.600583242@linutronix.de \
--to=tglx@linutronix.de \
--cc=andrew.cooper3@citrix.com \
--cc=andy.shevchenko@gmail.com \
--cc=andy@infradead.org \
--cc=arjan@linux.intel.com \
--cc=dimitri.sivanich@hpe.com \
--cc=feng.tang@intel.com \
--cc=jgross@suse.com \
--cc=kan.liang@linux.intel.com \
--cc=kprateek.nayak@amd.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mhklinux@outlook.com \
--cc=paulmck@kernel.org \
--cc=peterz@infradead.org \
--cc=ray.huang@amd.com \
--cc=rui.zhang@intel.com \
--cc=sohil.mehta@intel.com \
--cc=thomas.lendacky@amd.com \
--cc=wei.liu@kernel.org \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox