From: Dumitru Ceclan <mitrutzceclan@gmail.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>,
Jonathan Cameron <jic23@kernel.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
linux-iio@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Ceclan Dumitru <dumitru.ceclan@analog.com>,
Dumitru Ceclan <mitrutzceclan@gmail.com>,
Conor Dooley <conor.dooley@microchip.com>
Subject: [PATCH v4 1/5] dt-bindings: iio: hmc425a: add conditional GPIO array size constraints
Date: Wed, 17 Jan 2024 14:51:10 +0200 [thread overview]
Message-ID: <20240117125124.8326-2-mitrutzceclan@gmail.com> (raw)
In-Reply-To: <20240117125124.8326-1-mitrutzceclan@gmail.com>
ADRF5740 and HMC540S have a 4 bit parallel interface.
Update ctrl-gpios description and min/maxItems values depending on the
matched compatible to correctly reflect the hardware properties.
Fixes: 79f2ff6461e7 ("dt-bindings: iio: hmc425a: add entry for ADRF5740 Attenuator")
Fixes: 20f87a9a26be ("dt-bindings: iio: hmc425a: add entry for HMC540S")
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Dumitru Ceclan <mitrutzceclan@gmail.com>
---
.../bindings/iio/amplifiers/adi,hmc425a.yaml | 33 +++++++++++++++++--
1 file changed, 30 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml b/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml
index 67de9d4e3a1d..a434cb8ddcc9 100644
--- a/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml
+++ b/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml
@@ -33,11 +33,38 @@ properties:
ctrl-gpios:
description:
- Must contain an array of 6 GPIO specifiers, referring to the GPIO pins
- connected to the control pins V1-V6.
- minItems: 6
+ Must contain an array of GPIO specifiers, referring to the GPIO pins
+ connected to the control pins.
+ ADRF5740 - 4 GPIO connected to D2-D5
+ HMC540S - 4 GPIO connected to V1-V4
+ HMC425A - 6 GPIO connected to V1-V6
+ minItems: 1
maxItems: 6
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: adi,hmc425a
+ then:
+ properties:
+ ctrl-gpios:
+ minItems: 6
+ maxItems: 6
+ - if:
+ properties:
+ compatible:
+ contains:
+ anyOf:
+ - const: adi,adrf5740
+ - const: adi,hmc540s
+ then:
+ properties:
+ ctrl-gpios:
+ minItems: 4
+ maxItems: 4
+
required:
- compatible
- ctrl-gpios
--
2.42.0
next prev parent reply other threads:[~2024-01-17 12:51 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-01-17 12:51 [PATCH v4 0/5] Add support for LTC6373 Dumitru Ceclan
2024-01-17 12:51 ` Dumitru Ceclan [this message]
2024-01-17 12:51 ` [PATCH v4 2/5] dt-bindings: iio: hmc425a: add entry " Dumitru Ceclan
2024-01-17 12:51 ` [PATCH v4 3/5] iio: amplifiers: hmc425a: move conversion logic Dumitru Ceclan
2024-01-21 17:07 ` Jonathan Cameron
2024-01-17 12:51 ` [PATCH v4 4/5] iio: amplifiers: hmc425a: use pointers in match table Dumitru Ceclan
2024-01-21 16:57 ` Jonathan Cameron
2024-01-17 12:51 ` [PATCH v4 5/5] iio: amplifiers: hmc425a: add support for LTC6373 Instrumentation Amplifier Dumitru Ceclan
2024-01-21 17:14 ` Jonathan Cameron
2024-01-26 9:18 ` Petre Rodan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240117125124.8326-2-mitrutzceclan@gmail.com \
--to=mitrutzceclan@gmail.com \
--cc=conor+dt@kernel.org \
--cc=conor.dooley@microchip.com \
--cc=devicetree@vger.kernel.org \
--cc=dumitru.ceclan@analog.com \
--cc=jic23@kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox