public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Thomas Gleixner <tglx@linutronix.de>
To: LKML <linux-kernel@vger.kernel.org>
Cc: x86@kernel.org, Tom Lendacky <thomas.lendacky@amd.com>,
	Andrew Cooper <andrew.cooper3@citrix.com>,
	Arjan van de Ven <arjan@linux.intel.com>,
	Huang Rui <ray.huang@amd.com>, Juergen Gross <jgross@suse.com>,
	Dimitri Sivanich <dimitri.sivanich@hpe.com>,
	Sohil Mehta <sohil.mehta@intel.com>,
	K Prateek Nayak <kprateek.nayak@amd.com>,
	Kan Liang <kan.liang@linux.intel.com>,
	Zhang Rui <rui.zhang@intel.com>,
	"Paul E. McKenney" <paulmck@kernel.org>,
	Feng Tang <feng.tang@intel.com>,
	Andy Shevchenko <andy@infradead.org>,
	Michael Kelley <mhklinux@outlook.com>,
	"Peter Zijlstra (Intel)" <peterz@infradead.org>
Subject: [patch v2 13/30] x86/cpu/topology: Sanitize the APIC admission logic
Date: Tue, 23 Jan 2024 14:11:10 +0100 (CET)	[thread overview]
Message-ID: <20240118123649.287143098@linutronix.de> (raw)
In-Reply-To: 20240118123127.055361964@linutronix.de

From: Thomas Gleixner <tglx@linutronix.de>

Move the actually required content of generic_processor_id() into the call
sites and use common helper functions for them. This separates the early
boot registration and the ACPI hotplug mechanism completely which allows
further cleanups and improvements.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

---
 arch/x86/kernel/cpu/topology.c |  160 +++++++++++++++++++----------------------
 1 file changed, 78 insertions(+), 82 deletions(-)
---
--- a/arch/x86/kernel/cpu/topology.c
+++ b/arch/x86/kernel/cpu/topology.c
@@ -30,8 +30,10 @@ static struct {
 	unsigned int		nr_assigned_cpus;
 	unsigned int		nr_disabled_cpus;
 	unsigned int		nr_rejected_cpus;
+	u32			boot_cpu_apic_id;
 } topo_info __read_mostly = {
 	.nr_assigned_cpus	= 1,
+	.boot_cpu_apic_id	= BAD_APICID,
 };
 
 /*
@@ -83,78 +85,6 @@ early_initcall(smp_init_primary_thread_m
 static inline void cpu_mark_primary_thread(unsigned int cpu, unsigned int apicid) { }
 #endif
 
-static int topo_lookup_cpuid(u32 apic_id)
-{
-	int i;
-
-	/* CPU# to APICID mapping is persistent once it is established */
-	for (i = 0; i < topo_info.nr_assigned_cpus; i++) {
-		if (cpuid_to_apicid[i] == apic_id)
-			return i;
-	}
-	return -ENODEV;
-}
-
-/*
- * Should use this API to allocate logical CPU IDs to keep nr_logical_cpuids
- * and cpuid_to_apicid[] synchronized.
- */
-static int allocate_logical_cpuid(u32 apic_id)
-{
-	int cpu = topo_lookup_cpuid(apic_id);
-
-	if (cpu >= 0)
-		return cpu;
-
-	return topo_info.nr_assigned_cpus++;
-}
-
-static void cpu_update_apic(unsigned int cpu, u32 apic_id)
-{
-#if defined(CONFIG_SMP) || defined(CONFIG_X86_64)
-	early_per_cpu(x86_cpu_to_apicid, cpu) = apic_id;
-#endif
-	cpuid_to_apicid[cpu] = apic_id;
-	set_cpu_possible(cpu, true);
-	set_bit(apic_id, phys_cpu_present_map);
-	set_cpu_present(cpu, true);
-
-	if (system_state != SYSTEM_BOOTING)
-		cpu_mark_primary_thread(cpu, apic_id);
-}
-
-static int generic_processor_info(int apicid)
-{
-	int cpu;
-
-	/* The boot CPU must be set before MADT/MPTABLE parsing happens */
-	if (cpuid_to_apicid[0] == BAD_APICID)
-		panic("Boot CPU APIC not registered yet\n");
-
-	if (apicid == boot_cpu_physical_apicid)
-		return 0;
-
-	if (disabled_cpu_apicid == apicid) {
-		int thiscpu = topo_info.nr_assigned_cpus + topo_info.nr_disabled_cpus;
-
-		pr_warn("APIC: Disabling requested cpu. Processor %d/0x%x ignored.\n",
-			thiscpu, apicid);
-
-		topo_info.nr_rejected_cpus++;
-		return -ENODEV;
-	}
-
-	if (topo_info.nr_assigned_cpus >= nr_cpu_ids) {
-		pr_warn_once("APIC: CPU limit of %d reached. Ignoring further CPUs\n", nr_cpu_ids);
-		topo_info.nr_rejected_cpus++;
-		return -ENOSPC;
-	}
-
-	cpu = allocate_logical_cpuid(apicid);
-	cpu_update_apic(cpu, apicid);
-	return cpu;
-}
-
 static int __initdata setup_possible_cpus = -1;
 
 /*
@@ -222,6 +152,43 @@ static int __initdata setup_possible_cpu
 		set_cpu_possible(i, true);
 }
 
+static int topo_lookup_cpuid(u32 apic_id)
+{
+	int i;
+
+	/* CPU# to APICID mapping is persistent once it is established */
+	for (i = 0; i < topo_info.nr_assigned_cpus; i++) {
+		if (cpuid_to_apicid[i] == apic_id)
+			return i;
+	}
+	return -ENODEV;
+}
+
+static int topo_assign_cpunr(u32 apic_id)
+{
+	int cpu = topo_lookup_cpuid(apic_id);
+
+	if (cpu >= 0)
+		return cpu;
+
+	return topo_info.nr_assigned_cpus++;
+}
+
+static void topo_set_cpuids(unsigned int cpu, u32 apic_id, u32 acpi_id)
+{
+#if defined(CONFIG_SMP) || defined(CONFIG_X86_64)
+	early_per_cpu(x86_cpu_to_apicid, cpu) = apic_id;
+	early_per_cpu(x86_cpu_to_acpiid, cpu) = acpi_id;
+#endif
+	cpuid_to_apicid[cpu] = apic_id;
+
+	set_cpu_possible(cpu, true);
+	set_cpu_present(cpu, true);
+
+	if (system_state != SYSTEM_BOOTING)
+		cpu_mark_primary_thread(cpu, apic_id);
+}
+
 /**
  * topology_register_apic - Register an APIC in early topology maps
  * @apic_id:	The APIC ID to set up
@@ -234,17 +201,41 @@ void __init topology_register_apic(u32 a
 
 	if (apic_id >= MAX_LOCAL_APIC) {
 		pr_err_once("APIC ID %x exceeds kernel limit of: %x\n", apic_id, MAX_LOCAL_APIC - 1);
+		topo_info.nr_rejected_cpus++;
 		return;
 	}
 
-	if (!present) {
-		topo_info.nr_disabled_cpus++;
+	/* CPU numbers exhausted? */
+	if (topo_info.nr_assigned_cpus >= nr_cpu_ids) {
+		pr_warn_once("CPU limit of %d reached. Ignoring further CPUs\n", nr_cpu_ids);
+		topo_info.nr_rejected_cpus++;
 		return;
 	}
 
-	cpu = generic_processor_info(apic_id);
-	if (cpu >= 0)
-		early_per_cpu(x86_cpu_to_acpiid, cpu) = acpi_id;
+	if (disabled_cpu_apicid == apic_id) {
+		pr_info("Disabling CPU as requested via 'disable_cpu_apicid=0x%x'.\n", apic_id);
+		topo_info.nr_rejected_cpus++;
+		return;
+	}
+
+	if (present) {
+		/*
+		 * Prevent double registration, which is valid in case of
+		 * the boot CPU APIC because that is registered before the
+		 * enumeration of the APICs via firmware parsers or VM
+		 * guest mechanisms.
+		 */
+		if (test_and_set_bit(apic_id, phys_cpu_present_map))
+			return;
+
+		if (apic_id == topo_info.boot_cpu_apic_id)
+			cpu = 0;
+		else
+			cpu = topo_assign_cpunr(apic_id);
+		topo_set_cpuids(cpu, apic_id, acpi_id);
+	} else {
+		topo_info.nr_disabled_cpus++;
+	}
 }
 
 /**
@@ -255,8 +246,10 @@ void __init topology_register_apic(u32 a
  */
 void __init topology_register_boot_apic(u32 apic_id)
 {
-	cpuid_to_apicid[0] = apic_id;
-	cpu_update_apic(0, apic_id);
+	WARN_ON_ONCE(topo_info.boot_cpu_apic_id != BAD_APICID);
+
+	topo_info.boot_cpu_apic_id = apic_id;
+	topology_register_apic(apic_id, CPU_ACPIID_INVALID, true);
 }
 
 #ifdef CONFIG_ACPI_HOTPLUG_CPU
@@ -274,10 +267,13 @@ int topology_hotplug_apic(u32 apic_id, u
 
 	cpu = topo_lookup_cpuid(apic_id);
 	if (cpu < 0) {
-		cpu = generic_processor_info(apic_id);
-		if (cpu >= 0)
-			per_cpu(x86_cpu_to_acpiid, cpu) = acpi_id;
+		if (topo_info.nr_assigned_cpus >= nr_cpu_ids)
+			return -ENOSPC;
+
+		cpu = topo_assign_cpunr(apic_id);
 	}
+	set_bit(apic_id, phys_cpu_present_map);
+	topo_set_cpuids(cpu, apic_id, acpi_id);
 	return cpu;
 }
 


  parent reply	other threads:[~2024-01-23 13:11 UTC|newest]

Thread overview: 44+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-01-23 13:10 [patch v2 00/30] x86/apic: Rework APIC registration Thomas Gleixner
2024-01-23 13:10 ` [patch v2 01/30] x86/cpu/topology: Move registration out of APIC code Thomas Gleixner
2024-01-23 13:10 ` [patch v2 02/30] x86/cpu/topology: Provide separate APIC registration functions Thomas Gleixner
2024-01-23 13:10 ` [patch v2 03/30] x86/acpi: Use new " Thomas Gleixner
2024-01-23 13:10 ` [patch v2 04/30] x86/jailhouse: Use new APIC registration function Thomas Gleixner
2024-01-23 13:10 ` [patch v2 05/30] x86/of: Use new APIC registration functions Thomas Gleixner
2024-01-23 13:10 ` [patch v2 06/30] x86/mpparse: Use new APIC registration function Thomas Gleixner
2024-01-23 13:11 ` [patch v2 07/30] x86/acpi: Dont invoke topology_register_apic() for XEN PV Thomas Gleixner
2024-01-23 13:11 ` [patch v2 08/30] x86/xen/smp_pv: Register fake APICs Thomas Gleixner
2024-01-23 13:11 ` [patch v2 09/30] x86/cpu/topology: Confine topology information Thomas Gleixner
2024-01-23 13:11 ` [patch v2 10/30] x86/cpu/topology: Simplify APIC registration Thomas Gleixner
2024-01-23 13:11 ` [patch v2 11/30] x86/cpu/topology: Use a data structure for topology info Thomas Gleixner
2024-01-23 13:11 ` [patch v2 12/30] x86/smpboot: Make error message actually useful Thomas Gleixner
2024-01-23 13:11 ` Thomas Gleixner [this message]
2024-01-23 13:11 ` [patch v2 14/30] x86/cpu/topology: Rework possible CPU management Thomas Gleixner
2024-01-31 23:47   ` Sohil Mehta
2024-01-23 13:11 ` [patch v2 15/30] x86/cpu: Detect real BSP on crash kernels Thomas Gleixner
2024-01-31 17:59   ` Michael Kelley
2024-01-23 13:11 ` [patch v2 16/30] x86/topology: Add a mechanism to track topology via APIC IDs Thomas Gleixner
2024-01-23 13:11 ` [patch v2 17/30] x86/cpu/topology: Reject unknown APIC IDs on ACPI hotplug Thomas Gleixner
2024-01-23 13:11 ` [patch v2 18/30] x86/cpu/topology: Assign hotpluggable CPUIDs during init Thomas Gleixner
2024-01-23 13:11 ` [patch v2 19/30] x86/xen/smp_pv: Count number of vCPUs early Thomas Gleixner
2024-01-23 13:11 ` [patch v2 20/30] x86/cpu/topology: Let XEN/PV use topology from CPUID/MADT Thomas Gleixner
2024-01-23 13:11 ` [patch v2 21/30] x86/cpu/topology: Use topology bitmaps for sizing Thomas Gleixner
2024-01-26  7:07   ` Zhang, Rui
2024-01-26 20:22     ` Thomas Gleixner
2024-01-28 20:01       ` Paul E. McKenney
2024-02-12 16:40       ` Thomas Gleixner
2024-02-12 19:49         ` Michael Kelley
2024-02-13 20:23         ` Sohil Mehta
2024-01-23 13:11 ` [patch v2 22/30] x86/cpu/topology: Mop up primary thread mask handling Thomas Gleixner
2024-01-23 13:11 ` [patch v2 23/30] x86/cpu/topology: Simplify cpu_mark_primary_thread() Thomas Gleixner
2024-01-23 13:11 ` [patch v2 24/30] x86/cpu/topology: Provide logical pkg/die mapping Thomas Gleixner
2024-01-23 13:11 ` [patch v2 25/30] x86/cpu/topology: Use topology logical mapping mechanism Thomas Gleixner
2024-02-01 22:31   ` Sohil Mehta
2024-02-02  6:45   ` Zhang, Rui
2024-02-12 16:21     ` Thomas Gleixner
2024-01-23 13:11 ` [patch v2 26/30] x86/cpu/topology: Retrieve cores per package from topology bitmaps Thomas Gleixner
2024-01-23 13:11 ` [patch v2 27/30] x86/cpu/topology: Rename smp_num_siblings Thomas Gleixner
2024-01-23 13:11 ` [patch v2 28/30] x86/cpu/topology: Rename topology_max_die_per_package() Thomas Gleixner
2024-01-23 13:11 ` [patch v2 29/30] x86/cpu/topology: Provide __num_[cores|threads]_per_package Thomas Gleixner
2024-01-23 13:11 ` [patch v2 30/30] x86/cpu/topology: Get rid of cpuinfo::x86_max_cores Thomas Gleixner
2024-01-24 14:31 ` [patch v2 00/30] x86/apic: Rework APIC registration Zhang, Rui
2024-02-01 22:10 ` Sohil Mehta

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240118123649.287143098@linutronix.de \
    --to=tglx@linutronix.de \
    --cc=andrew.cooper3@citrix.com \
    --cc=andy@infradead.org \
    --cc=arjan@linux.intel.com \
    --cc=dimitri.sivanich@hpe.com \
    --cc=feng.tang@intel.com \
    --cc=jgross@suse.com \
    --cc=kan.liang@linux.intel.com \
    --cc=kprateek.nayak@amd.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mhklinux@outlook.com \
    --cc=paulmck@kernel.org \
    --cc=peterz@infradead.org \
    --cc=ray.huang@amd.com \
    --cc=rui.zhang@intel.com \
    --cc=sohil.mehta@intel.com \
    --cc=thomas.lendacky@amd.com \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox