From: Stefan Binding <sbinding@opensource.cirrus.com>
To: Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>
Cc: <alsa-devel@alsa-project.org>, <linux-sound@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <patches@opensource.cirrus.com>,
"Stefan Binding" <sbinding@opensource.cirrus.com>
Subject: [PATCH v2 1/4] ALSA: hda: cs35l41: Set Channel Index correctly when system is missing _DSD
Date: Fri, 26 Jan 2024 16:40:02 +0000 [thread overview]
Message-ID: <20240126164005.367021-2-sbinding@opensource.cirrus.com> (raw)
In-Reply-To: <20240126164005.367021-1-sbinding@opensource.cirrus.com>
Current method to set Channel Index when the system is missing _DSD
assumes that the channels alternate, which is not guaranteed.
Instead use the same methodology as the main driver does when _DSD
exists.
Fixes: 8c4c216db8fb ("ALSA: hda: cs35l41: Add config table to support many laptops without _DSD")
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
---
sound/pci/hda/cs35l41_hda_property.c | 16 ++++++----------
1 file changed, 6 insertions(+), 10 deletions(-)
diff --git a/sound/pci/hda/cs35l41_hda_property.c b/sound/pci/hda/cs35l41_hda_property.c
index 35277ce890a4..87edf0d2fbb0 100644
--- a/sound/pci/hda/cs35l41_hda_property.c
+++ b/sound/pci/hda/cs35l41_hda_property.c
@@ -203,6 +203,7 @@ static int generic_dsd_config(struct cs35l41_hda *cs35l41, struct device *physde
struct spi_device *spi;
bool dsd_found;
int ret;
+ int i;
for (cfg = cs35l41_config_table; cfg->ssid; cfg++) {
if (!strcasecmp(cfg->ssid, cs35l41->acpi_subsystem_id))
@@ -288,16 +289,6 @@ static int generic_dsd_config(struct cs35l41_hda *cs35l41, struct device *physde
cs35l41->index = id == 0x40 ? 0 : 1;
}
- if (cfg->num_amps == 3)
- /* 3 amps means a center channel, so no duplicate channels */
- cs35l41->channel_index = 0;
- else
- /*
- * if 4 amps, there are duplicate channels, so they need different indexes
- * if 2 amps, no duplicate channels, channel_index would be 0
- */
- cs35l41->channel_index = cs35l41->index / 2;
-
cs35l41->reset_gpio = fwnode_gpiod_get_index(acpi_fwnode_handle(cs35l41->dacpi), "reset",
cs35l41->index, GPIOD_OUT_LOW,
"cs35l41-reset");
@@ -305,6 +296,11 @@ static int generic_dsd_config(struct cs35l41_hda *cs35l41, struct device *physde
hw_cfg->spk_pos = cfg->channel[cs35l41->index];
+ cs35l41->channel_index = 0;
+ for (i = 0; i < cs35l41->index; i++)
+ if (cfg->channel[i] == hw_cfg->spk_pos)
+ cs35l41->channel_index++;
+
if (cfg->boost_type == INTERNAL) {
hw_cfg->bst_type = CS35L41_INT_BOOST;
hw_cfg->bst_ind = cfg->boost_ind_nanohenry;
--
2.34.1
next prev parent reply other threads:[~2024-01-26 16:40 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-01-26 16:40 [PATCH v2 0/4] Support HP Models without _DSD Stefan Binding
2024-01-26 16:40 ` Stefan Binding [this message]
2024-01-26 16:40 ` [PATCH v2 2/4] ALSA: hda: cs35l41: Support additional HP Envy Models Stefan Binding
2024-01-26 16:40 ` [PATCH v2 3/4] ALSA: hda: cs35l41: Support HP models without _DSD using dual Speaker ID Stefan Binding
2024-01-26 16:40 ` [PATCH v2 4/4] ALSA: hda/realtek: Add quirks for various HP ENVY models Stefan Binding
2024-01-28 12:11 ` [PATCH v2 0/4] Support HP Models without _DSD Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240126164005.367021-2-sbinding@opensource.cirrus.com \
--to=sbinding@opensource.cirrus.com \
--cc=alsa-devel@alsa-project.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=patches@opensource.cirrus.com \
--cc=perex@perex.cz \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox