From: Jisheng Zhang <jszhang@kernel.org>
To: Conor Dooley <conor@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Paul Walmsley <paul.walmsley@sifive.com>,
Palmer Dabbelt <palmer@dabbelt.com>,
Albert Ou <aou@eecs.berkeley.edu>,
Emil Renner Berthing <kernel@esmil.dk>
Cc: linux-riscv@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v3 6/6] riscv: dts: starfive: add Milkv Mars board device tree
Date: Wed, 31 Jan 2024 21:26:00 +0800 [thread overview]
Message-ID: <20240131132600.4067-7-jszhang@kernel.org> (raw)
In-Reply-To: <20240131132600.4067-1-jszhang@kernel.org>
The Milkv Mars is a development board based on the Starfive JH7110 SoC.
The board features:
- JH7110 SoC
- 1/2/4/8 GiB LPDDR4 DRAM
- AXP15060 PMIC
- 40 pin GPIO header
- 3x USB 3.0 host port
- 1x USB 2.0 host port
- 1x M.2 E-Key
- 1x eMMC slot
- 1x MicroSD slot
- 1x QSPI Flash
- 1x 1Gbps Ethernet port
- 1x HDMI port
- 1x 2-lane DSI and 1x 4-lane DSI
- 1x 2-lane CSI
Add the devicetree file describing the currently supported features,
namely PMIC, UART, I2C, GPIO, SD card, QSPI Flash, eMMC and Ethernet.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
---
arch/riscv/boot/dts/starfive/Makefile | 1 +
.../boot/dts/starfive/jh7110-milkv-mars.dts | 35 +++++++++++++++++++
2 files changed, 36 insertions(+)
create mode 100644 arch/riscv/boot/dts/starfive/jh7110-milkv-mars.dts
diff --git a/arch/riscv/boot/dts/starfive/Makefile b/arch/riscv/boot/dts/starfive/Makefile
index 0141504c0f5c..2fa0cd7f31c3 100644
--- a/arch/riscv/boot/dts/starfive/Makefile
+++ b/arch/riscv/boot/dts/starfive/Makefile
@@ -8,5 +8,6 @@ DTC_FLAGS_jh7110-starfive-visionfive-2-v1.3b := -@
dtb-$(CONFIG_ARCH_STARFIVE) += jh7100-beaglev-starlight.dtb
dtb-$(CONFIG_ARCH_STARFIVE) += jh7100-starfive-visionfive-v1.dtb
+dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-milkv-mars.dtb
dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-starfive-visionfive-2-v1.2a.dtb
dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-starfive-visionfive-2-v1.3b.dtb
diff --git a/arch/riscv/boot/dts/starfive/jh7110-milkv-mars.dts b/arch/riscv/boot/dts/starfive/jh7110-milkv-mars.dts
new file mode 100644
index 000000000000..de600e799e7d
--- /dev/null
+++ b/arch/riscv/boot/dts/starfive/jh7110-milkv-mars.dts
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (C) 2023 Jisheng Zhang <jszhang@kernel.org>
+ */
+
+/dts-v1/;
+#include "jh7110-visionfive2-mars-common.dtsi"
+
+/ {
+ model = "Milk-V Mars";
+ compatible = "milkv,mars", "starfive,jh7110";
+};
+
+&gmac0 {
+ starfive,tx-use-rgmii-clk;
+ assigned-clocks = <&aoncrg JH7110_AONCLK_GMAC0_TX>;
+ assigned-clock-parents = <&aoncrg JH7110_AONCLK_GMAC0_RMII_RTX>;
+};
+
+
+&phy0 {
+ motorcomm,tx-clk-adj-enabled;
+ motorcomm,tx-clk-10-inverted;
+ motorcomm,tx-clk-100-inverted;
+ motorcomm,tx-clk-1000-inverted;
+ motorcomm,rx-clk-drv-microamp = <3970>;
+ motorcomm,rx-data-drv-microamp = <2910>;
+ rx-internal-delay-ps = <1500>;
+ tx-internal-delay-ps = <1500>;
+};
+
+&mmc1 {
+ disable-wp;
+ cd-gpios = <&sysgpio 41 GPIO_ACTIVE_LOW>;
+};
--
2.43.0
next prev parent reply other threads:[~2024-01-31 13:39 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-01-31 13:25 [PATCH v3 0/6] riscv: dts: starfive: add Milkv Mars board device tree Jisheng Zhang
2024-01-31 13:25 ` [PATCH v3 1/6] riscv: dts: starfive: add 'cpus' label to jh7110 and jh7100 soc dtsi Jisheng Zhang
2024-04-19 22:04 ` Emil Renner Berthing
2024-01-31 13:25 ` [PATCH v3 2/6] dt-bindings: riscv: starfive: add Milkv Mars board Jisheng Zhang
2024-04-19 22:04 ` Emil Renner Berthing
2024-01-31 13:25 ` [PATCH v3 3/6] riscv: dts: starfive: visionfive 2: update sound and codec dt node name Jisheng Zhang
2024-04-19 22:05 ` Emil Renner Berthing
2024-01-31 13:25 ` [PATCH v3 4/6] riscv: dts: starfive: visionfive 2: use cpus label for timebase freq Jisheng Zhang
2024-04-19 22:05 ` Emil Renner Berthing
2024-01-31 13:25 ` [PATCH v3 5/6] riscv: dts: starfive: introduce a common board dtsi for jh7110 based boards Jisheng Zhang
2024-01-31 13:26 ` Jisheng Zhang [this message]
2024-02-06 19:13 ` [PATCH v3 6/6] riscv: dts: starfive: add Milkv Mars board device tree Conor Dooley
2024-03-27 18:06 ` Conor Dooley
2024-03-28 10:08 ` Jisheng Zhang
2024-03-28 12:45 ` Emil Renner Berthing
2024-03-29 2:32 ` Jisheng Zhang
2024-03-28 21:28 ` Heinrich Schuchardt
2024-03-29 2:31 ` Jisheng Zhang
2024-04-01 13:28 ` Heinrich Schuchardt
2024-04-01 14:44 ` Jisheng Zhang
2024-04-19 22:11 ` Emil Renner Berthing
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240131132600.4067-7-jszhang@kernel.org \
--to=jszhang@kernel.org \
--cc=aou@eecs.berkeley.edu \
--cc=conor@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=kernel@esmil.dk \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=palmer@dabbelt.com \
--cc=paul.walmsley@sifive.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox