[PATCH AUTOSEL 5.15 01/23] ext4: avoid dividing by 0 in mb_update_avg_fragment_size() when block bitmap corrupt

[PATCH AUTOSEL 5.15 01/23] ext4: avoid dividing by 0 in mb_update_avg_fragment_size() when block bitmap corrupt

[Sasha Levin]

From: Baokun Li <libaokun1@huawei.com>

[ Upstream commit 993bf0f4c393b3667830918f9247438a8f6fdb5b ]

Determine if bb_fragments is 0 instead of determining bb_free to eliminate
the risk of dividing by zero when the block bitmap is corrupted.

Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20240104142040.2835097-6-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ext4/mballoc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c
index e44c28ceb9cd..3df3c3894f7b 100644
--- a/fs/ext4/mballoc.c
+++ b/fs/ext4/mballoc.c
@@ -853,7 +853,7 @@ mb_update_avg_fragment_size(struct super_block *sb, struct ext4_group_info *grp)
 {
 	struct ext4_sb_info *sbi = EXT4_SB(sb);
 
-	if (!test_opt2(sb, MB_OPTIMIZE_SCAN) || grp->bb_free == 0)
+	if (!test_opt2(sb, MB_OPTIMIZE_SCAN) || grp->bb_fragments == 0)
 		return;
 
 	write_lock(&sbi->s_mb_rb_lock);
-- 
2.43.0

[PATCH AUTOSEL 5.15 02/23] ext4: avoid allocating blocks from corrupted group in ext4_mb_try_best_found()

[Sasha Levin]

From: Baokun Li <libaokun1@huawei.com>

[ Upstream commit 4530b3660d396a646aad91a787b6ab37cf604b53 ]

Determine if the group block bitmap is corrupted before using ac_b_ex in
ext4_mb_try_best_found() to avoid allocating blocks from a group with a
corrupted block bitmap in the following concurrency and making the
situation worse.

ext4_mb_regular_allocator
  ext4_lock_group(sb, group)
  ext4_mb_good_group
   // check if the group bbitmap is corrupted
  ext4_mb_complex_scan_group
   // Scan group gets ac_b_ex but doesn't use it
  ext4_unlock_group(sb, group)
                           ext4_mark_group_bitmap_corrupted(group)
                           // The block bitmap was corrupted during
                           // the group unlock gap.
  ext4_mb_try_best_found
    ext4_lock_group(ac->ac_sb, group)
    ext4_mb_use_best_found
      mb_mark_used
      // Allocating blocks in block bitmap corrupted group

Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20240104142040.2835097-7-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ext4/mballoc.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c
index 3df3c3894f7b..d826579686f7 100644
--- a/fs/ext4/mballoc.c
+++ b/fs/ext4/mballoc.c
@@ -2197,6 +2197,9 @@ int ext4_mb_try_best_found(struct ext4_allocation_context *ac,
 		return err;
 
 	ext4_lock_group(ac->ac_sb, group);
+	if (unlikely(EXT4_MB_GRP_BBITMAP_CORRUPT(e4b->bd_info)))
+		goto out;
+
 	max = mb_find_extent(e4b, ex.fe_start, ex.fe_len, &ex);
 
 	if (max > 0) {
@@ -2204,6 +2207,7 @@ int ext4_mb_try_best_found(struct ext4_allocation_context *ac,
 		ext4_mb_use_best_found(ac, e4b);
 	}
 
+out:
 	ext4_unlock_group(ac->ac_sb, group);
 	ext4_mb_unload_buddy(e4b);
 
-- 
2.43.0

[PATCH AUTOSEL 5.15 03/23] ext4: avoid allocating blocks from corrupted group in ext4_mb_find_by_goal()

[Sasha Levin]

From: Baokun Li <libaokun1@huawei.com>

[ Upstream commit 832698373a25950942c04a512daa652c18a9b513 ]

Places the logic for checking if the group's block bitmap is corrupt under
the protection of the group lock to avoid allocating blocks from the group
with a corrupted block bitmap.

Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20240104142040.2835097-8-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ext4/mballoc.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c
index d826579686f7..e5ae9870d659 100644
--- a/fs/ext4/mballoc.c
+++ b/fs/ext4/mballoc.c
@@ -2236,12 +2236,10 @@ int ext4_mb_find_by_goal(struct ext4_allocation_context *ac,
 	if (err)
 		return err;
 
-	if (unlikely(EXT4_MB_GRP_BBITMAP_CORRUPT(e4b->bd_info))) {
-		ext4_mb_unload_buddy(e4b);
-		return 0;
-	}
-
 	ext4_lock_group(ac->ac_sb, group);
+	if (unlikely(EXT4_MB_GRP_BBITMAP_CORRUPT(e4b->bd_info)))
+		goto out;
+
 	max = mb_find_extent(e4b, ac->ac_g_ex.fe_start,
 			     ac->ac_g_ex.fe_len, &ex);
 	ex.fe_logical = 0xDEADFA11; /* debug value */
@@ -2274,6 +2272,7 @@ int ext4_mb_find_by_goal(struct ext4_allocation_context *ac,
 		ac->ac_b_ex = ex;
 		ext4_mb_use_best_found(ac, e4b);
 	}
+out:
 	ext4_unlock_group(ac->ac_sb, group);
 	ext4_mb_unload_buddy(e4b);
 
-- 
2.43.0

[PATCH AUTOSEL 5.15 04/23] dmaengine: ti: edma: Add some null pointer checks to the edma_probe

[Sasha Levin]

From: Kunwu Chan <chentao@kylinos.cn>

[ Upstream commit 6e2276203ac9ff10fc76917ec9813c660f627369 ]

devm_kasprintf() returns a pointer to dynamically allocated memory
which can be NULL upon failure. Ensure the allocation was successful
by checking the pointer validity.

Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Link: https://lore.kernel.org/r/20240118031929.192192-1-chentao@kylinos.cn
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/ti/edma.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/dma/ti/edma.c b/drivers/dma/ti/edma.c
index a1adc8d91fd8..69292d4a0c44 100644
--- a/drivers/dma/ti/edma.c
+++ b/drivers/dma/ti/edma.c
@@ -2462,6 +2462,11 @@ static int edma_probe(struct platform_device *pdev)
 	if (irq > 0) {
 		irq_name = devm_kasprintf(dev, GFP_KERNEL, "%s_ccint",
 					  dev_name(dev));
+		if (!irq_name) {
+			ret = -ENOMEM;
+			goto err_disable_pm;
+		}
+
 		ret = devm_request_irq(dev, irq, dma_irq_handler, 0, irq_name,
 				       ecc);
 		if (ret) {
@@ -2478,6 +2483,11 @@ static int edma_probe(struct platform_device *pdev)
 	if (irq > 0) {
 		irq_name = devm_kasprintf(dev, GFP_KERNEL, "%s_ccerrint",
 					  dev_name(dev));
+		if (!irq_name) {
+			ret = -ENOMEM;
+			goto err_disable_pm;
+		}
+
 		ret = devm_request_irq(dev, irq, dma_ccerr_handler, 0, irq_name,
 				       ecc);
 		if (ret) {
-- 
2.43.0

[PATCH AUTOSEL 5.15 05/23] ASoC: codecs: wcd934x: drop unneeded regulator include

[Sasha Levin]

From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

[ Upstream commit 35314e39dabcfb256832654ad0e856a9fba744bd ]

Driver does not use any regulator code, so drop redundant include of
regulator/consumer.h header.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240117151208.1219755-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/wcd934x.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/sound/soc/codecs/wcd934x.c b/sound/soc/codecs/wcd934x.c
index 94ffd2ba29ae..a12bc454e085 100644
--- a/sound/soc/codecs/wcd934x.c
+++ b/sound/soc/codecs/wcd934x.c
@@ -13,7 +13,6 @@
 #include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
-#include <linux/regulator/consumer.h>
 #include <linux/slab.h>
 #include <linux/slimbus.h>
 #include <sound/pcm_params.h>
-- 
2.43.0

[PATCH AUTOSEL 5.15 06/23] regulator: pwm-regulator: Add validity checks in continuous .get_voltage

[Sasha Levin]

From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

[ Upstream commit c92688cac239794e4a1d976afa5203a4d3a2ac0e ]

Continuous regulators can be configured to operate only in a certain
duty cycle range (for example from 0..91%). Add a check to error out if
the duty cycle translates to an unsupported (or out of range) voltage.

Suggested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://msgid.link/r/20240113224628.377993-2-martin.blumenstingl@googlemail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/regulator/pwm-regulator.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/regulator/pwm-regulator.c b/drivers/regulator/pwm-regulator.c
index 7629476d94ae..f4d9d9455dea 100644
--- a/drivers/regulator/pwm-regulator.c
+++ b/drivers/regulator/pwm-regulator.c
@@ -158,6 +158,9 @@ static int pwm_regulator_get_voltage(struct regulator_dev *rdev)
 	pwm_get_state(drvdata->pwm, &pstate);
 
 	voltage = pwm_get_relative_duty_cycle(&pstate, duty_unit);
+	if (voltage < min(max_uV_duty, min_uV_duty) ||
+	    voltage > max(max_uV_duty, min_uV_duty))
+		return -ENOTRECOVERABLE;
 
 	/*
 	 * The dutycycle for min_uV might be greater than the one for max_uV.
-- 
2.43.0

[PATCH AUTOSEL 5.15 07/23] nvmet-tcp: fix nvme tcp ida memory leak

[Sasha Levin]

From: Guixin Liu <kanie@linux.alibaba.com>

[ Upstream commit 47c5dd66c1840524572dcdd956f4af2bdb6fbdff ]

The nvmet_tcp_queue_ida should be destroy when the nvmet-tcp module
exit.

Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/target/tcp.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/nvme/target/tcp.c b/drivers/nvme/target/tcp.c
index 4f2164a3f466..8468a41322f2 100644
--- a/drivers/nvme/target/tcp.c
+++ b/drivers/nvme/target/tcp.c
@@ -1884,6 +1884,7 @@ static void __exit nvmet_tcp_exit(void)
 	flush_workqueue(nvmet_wq);
 
 	destroy_workqueue(nvmet_tcp_wq);
+	ida_destroy(&nvmet_tcp_queue_ida);
 }
 
 module_init(nvmet_tcp_init);
-- 
2.43.0

[PATCH AUTOSEL 5.15 08/23] ALSA: usb-audio: Check presence of valid altsetting control

[Sasha Levin]

From: Alexander Tsoy <alexander@tsoy.me>

[ Upstream commit 346f59d1e8ed0eed41c80e1acb657e484c308e6a ]

Many devices with a single alternate setting do not have a Valid
Alternate Setting Control and validation performed by
validate_sample_rate_table_v2v3() doesn't work on them and is not
really needed. So check the presense of control before sending
altsetting validation requests.

MOTU Microbook IIc is suffering the most without this check. It
takes up to 40 seconds to bootup due to how slow it switches
sampling rates:

[ 2659.164824] usb 3-2: New USB device found, idVendor=07fd, idProduct=0004, bcdDevice= 0.60
[ 2659.164827] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2659.164829] usb 3-2: Product: MicroBook IIc
[ 2659.164830] usb 3-2: Manufacturer: MOTU
[ 2659.166204] usb 3-2: Found last interface = 3
[ 2679.322298] usb 3-2: No valid sample rate available for 1:1, assuming a firmware bug
[ 2679.322306] usb 3-2: 1:1: add audio endpoint 0x3
[ 2679.322321] usb 3-2: Creating new data endpoint #3
[ 2679.322552] usb 3-2: 1:1 Set sample rate 96000, clock 1
[ 2684.362250] usb 3-2: 2:1: cannot get freq (v2/v3): err -110
[ 2694.444700] usb 3-2: No valid sample rate available for 2:1, assuming a firmware bug
[ 2694.444707] usb 3-2: 2:1: add audio endpoint 0x84
[ 2694.444721] usb 3-2: Creating new data endpoint #84
[ 2699.482103] usb 3-2: 2:1 Set sample rate 96000, clock 1

Signed-off-by: Alexander Tsoy <alexander@tsoy.me>
Link: https://lore.kernel.org/r/20240129121254.3454481-1-alexander@tsoy.me
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/usb/format.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/sound/usb/format.c b/sound/usb/format.c
index ab5fed9f55b6..3b45d0ee7693 100644
--- a/sound/usb/format.c
+++ b/sound/usb/format.c
@@ -470,9 +470,11 @@ static int validate_sample_rate_table_v2v3(struct snd_usb_audio *chip,
 					   int clock)
 {
 	struct usb_device *dev = chip->dev;
+	struct usb_host_interface *alts;
 	unsigned int *table;
 	unsigned int nr_rates;
 	int i, err;
+	u32 bmControls;
 
 	/* performing the rate verification may lead to unexpected USB bus
 	 * behavior afterwards by some unknown reason.  Do this only for the
@@ -481,6 +483,24 @@ static int validate_sample_rate_table_v2v3(struct snd_usb_audio *chip,
 	if (!(chip->quirk_flags & QUIRK_FLAG_VALIDATE_RATES))
 		return 0; /* don't perform the validation as default */
 
+	alts = snd_usb_get_host_interface(chip, fp->iface, fp->altsetting);
+	if (!alts)
+		return 0;
+
+	if (fp->protocol == UAC_VERSION_3) {
+		struct uac3_as_header_descriptor *as = snd_usb_find_csint_desc(
+				alts->extra, alts->extralen, NULL, UAC_AS_GENERAL);
+		bmControls = le32_to_cpu(as->bmControls);
+	} else {
+		struct uac2_as_header_descriptor *as = snd_usb_find_csint_desc(
+				alts->extra, alts->extralen, NULL, UAC_AS_GENERAL);
+		bmControls = as->bmControls;
+	}
+
+	if (!uac_v2v3_control_is_readable(bmControls,
+				UAC2_AS_VAL_ALT_SETTINGS))
+		return 0;
+
 	table = kcalloc(fp->nr_rates, sizeof(*table), GFP_KERNEL);
 	if (!table)
 		return -ENOMEM;
-- 
2.43.0

[PATCH AUTOSEL 5.15 09/23] ASoC: sunxi: sun4i-spdif: Add support for Allwinner H616

[Sasha Levin]

From: Chen-Yu Tsai <wens@csie.org>

[ Upstream commit 0adf963b8463faa44653e22e56ce55f747e68868 ]

The SPDIF hardware block found in the H616 SoC has the same layout as
the one found in the H6 SoC, except that it is missing the receiver
side.

Since the driver currently only supports the transmit function, support
for the H616 is identical to what is currently done for the H6.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://msgid.link/r/20240127163247.384439-4-wens@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/sunxi/sun4i-spdif.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/sound/soc/sunxi/sun4i-spdif.c b/sound/soc/sunxi/sun4i-spdif.c
index a10949bf0ca1..dd8d13f3fd12 100644
--- a/sound/soc/sunxi/sun4i-spdif.c
+++ b/sound/soc/sunxi/sun4i-spdif.c
@@ -464,6 +464,11 @@ static const struct of_device_id sun4i_spdif_of_match[] = {
 		.compatible = "allwinner,sun50i-h6-spdif",
 		.data = &sun50i_h6_spdif_quirks,
 	},
+	{
+		.compatible = "allwinner,sun50i-h616-spdif",
+		/* Essentially the same as the H6, but without RX */
+		.data = &sun50i_h6_spdif_quirks,
+	},
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, sun4i_spdif_of_match);
-- 
2.43.0

[PATCH AUTOSEL 5.15 10/23] spi: sh-msiof: avoid integer overflow in constants

[Sasha Levin]

From: Wolfram Sang <wsa+renesas@sang-engineering.com>

[ Upstream commit 6500ad28fd5d67d5ca0fee9da73c463090842440 ]

cppcheck rightfully warned:

 drivers/spi/spi-sh-msiof.c:792:28: warning: Signed integer overflow for expression '7<<29'. [integerOverflow]
 sh_msiof_write(p, SIFCTR, SIFCTR_TFWM_1 | SIFCTR_RFWM_1);

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://msgid.link/r/20240130094053.10672-1-wsa+renesas@sang-engineering.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-sh-msiof.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/spi/spi-sh-msiof.c b/drivers/spi/spi-sh-msiof.c
index eb2c64e0a5f7..b7b3ec76e2cb 100644
--- a/drivers/spi/spi-sh-msiof.c
+++ b/drivers/spi/spi-sh-msiof.c
@@ -137,14 +137,14 @@ struct sh_msiof_spi_priv {
 
 /* SIFCTR */
 #define SIFCTR_TFWM_MASK	GENMASK(31, 29)	/* Transmit FIFO Watermark */
-#define SIFCTR_TFWM_64		(0 << 29)	/*  Transfer Request when 64 empty stages */
-#define SIFCTR_TFWM_32		(1 << 29)	/*  Transfer Request when 32 empty stages */
-#define SIFCTR_TFWM_24		(2 << 29)	/*  Transfer Request when 24 empty stages */
-#define SIFCTR_TFWM_16		(3 << 29)	/*  Transfer Request when 16 empty stages */
-#define SIFCTR_TFWM_12		(4 << 29)	/*  Transfer Request when 12 empty stages */
-#define SIFCTR_TFWM_8		(5 << 29)	/*  Transfer Request when 8 empty stages */
-#define SIFCTR_TFWM_4		(6 << 29)	/*  Transfer Request when 4 empty stages */
-#define SIFCTR_TFWM_1		(7 << 29)	/*  Transfer Request when 1 empty stage */
+#define SIFCTR_TFWM_64		(0UL << 29)	/*  Transfer Request when 64 empty stages */
+#define SIFCTR_TFWM_32		(1UL << 29)	/*  Transfer Request when 32 empty stages */
+#define SIFCTR_TFWM_24		(2UL << 29)	/*  Transfer Request when 24 empty stages */
+#define SIFCTR_TFWM_16		(3UL << 29)	/*  Transfer Request when 16 empty stages */
+#define SIFCTR_TFWM_12		(4UL << 29)	/*  Transfer Request when 12 empty stages */
+#define SIFCTR_TFWM_8		(5UL << 29)	/*  Transfer Request when 8 empty stages */
+#define SIFCTR_TFWM_4		(6UL << 29)	/*  Transfer Request when 4 empty stages */
+#define SIFCTR_TFWM_1		(7UL << 29)	/*  Transfer Request when 1 empty stage */
 #define SIFCTR_TFUA_MASK	GENMASK(26, 20) /* Transmit FIFO Usable Area */
 #define SIFCTR_TFUA_SHIFT	20
 #define SIFCTR_TFUA(i)		((i) << SIFCTR_TFUA_SHIFT)
-- 
2.43.0

[PATCH AUTOSEL 5.15 11/23] Input: xpad - add Lenovo Legion Go controllers

[Sasha Levin]

From: Brenton Simpson <appsforartists@google.com>

[ Upstream commit 80441f76ee67002437db61f3b317ed80cce085d2 ]

The Lenovo Legion Go is a handheld gaming system, similar to a Steam Deck.
It has a gamepad (including rear paddles), 3 gyroscopes, a trackpad,
volume buttons, a power button, and 2 LED ring lights.

The Legion Go firmware presents these controls as a USB hub with various
devices attached.  In its default state, the gamepad is presented as an
Xbox controller connected to this hub.  (By holding a combination of
buttons, it can be changed to use the older DirectInput API.)

This patch teaches the existing Xbox controller module `xpad` to bind to
the controller in the Legion Go, which enables support for the:

- directional pad,
- analog sticks (including clicks),
- X, Y, A, B,
- start and select (or menu and capture),
- shoulder buttons, and
- rumble.

The trackpad, touchscreen, volume controls, and power button are already
supported via existing kernel modules.  Two of the face buttons, the
gyroscopes, rear paddles, and LEDs are not.

After this patch lands, the Legion Go will be mostly functional in Linux,
out-of-the-box.  The various components of the USB hub can be synthesized
into a single logical controller (including the additional buttons) in
userspace with [Handheld Daemon](https://github.com/hhd-dev/hhd), which
makes the Go fully functional.

Signed-off-by: Brenton Simpson <appsforartists@google.com>
Link: https://lore.kernel.org/r/20240118183546.418064-1-appsforartists@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/input/joystick/xpad.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c
index 1ff0d4e24fe6..f0b1dac93822 100644
--- a/drivers/input/joystick/xpad.c
+++ b/drivers/input/joystick/xpad.c
@@ -276,6 +276,7 @@ static const struct xpad_device {
 	{ 0x1689, 0xfd00, "Razer Onza Tournament Edition", 0, XTYPE_XBOX360 },
 	{ 0x1689, 0xfd01, "Razer Onza Classic Edition", 0, XTYPE_XBOX360 },
 	{ 0x1689, 0xfe00, "Razer Sabertooth", 0, XTYPE_XBOX360 },
+	{ 0x17ef, 0x6182, "Lenovo Legion Controller for Windows", 0, XTYPE_XBOX360 },
 	{ 0x1949, 0x041a, "Amazon Game Controller", 0, XTYPE_XBOX360 },
 	{ 0x1bad, 0x0002, "Harmonix Rock Band Guitar", 0, XTYPE_XBOX360 },
 	{ 0x1bad, 0x0003, "Harmonix Rock Band Drumkit", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
@@ -464,6 +465,7 @@ static const struct usb_device_id xpad_table[] = {
 	XPAD_XBOX360_VENDOR(0x15e4),		/* Numark X-Box 360 controllers */
 	XPAD_XBOX360_VENDOR(0x162e),		/* Joytech X-Box 360 controllers */
 	XPAD_XBOX360_VENDOR(0x1689),		/* Razer Onza */
+	XPAD_XBOX360_VENDOR(0x17ef),		/* Lenovo */
 	XPAD_XBOX360_VENDOR(0x1949),		/* Amazon controllers */
 	XPAD_XBOX360_VENDOR(0x1bad),		/* Harminix Rock Band Guitar and Drums */
 	XPAD_XBOX360_VENDOR(0x20d6),		/* PowerA Controllers */
-- 
2.43.0

[PATCH AUTOSEL 5.15 12/23] netfilter: conntrack: check SCTP_CID_SHUTDOWN_ACK for vtag setting in sctp_new

[Sasha Levin]

From: Xin Long <lucien.xin@gmail.com>

[ Upstream commit 6e348067ee4bc5905e35faa3a8fafa91c9124bc7 ]

The annotation says in sctp_new(): "If it is a shutdown ack OOTB packet, we
expect a return shutdown complete, otherwise an ABORT Sec 8.4 (5) and (8)".
However, it does not check SCTP_CID_SHUTDOWN_ACK before setting vtag[REPLY]
in the conntrack entry(ct).

Because of that, if the ct in Router disappears for some reason in [1]
with the packet sequence like below:

   Client > Server: sctp (1) [INIT] [init tag: 3201533963]
   Server > Client: sctp (1) [INIT ACK] [init tag: 972498433]
   Client > Server: sctp (1) [COOKIE ECHO]
   Server > Client: sctp (1) [COOKIE ACK]
   Client > Server: sctp (1) [DATA] (B)(E) [TSN: 3075057809]
   Server > Client: sctp (1) [SACK] [cum ack 3075057809]
   Server > Client: sctp (1) [HB REQ]
   (the ct in Router disappears somehow)  <-------- [1]
   Client > Server: sctp (1) [HB ACK]
   Client > Server: sctp (1) [DATA] (B)(E) [TSN: 3075057810]
   Client > Server: sctp (1) [DATA] (B)(E) [TSN: 3075057810]
   Client > Server: sctp (1) [HB REQ]
   Client > Server: sctp (1) [DATA] (B)(E) [TSN: 3075057810]
   Client > Server: sctp (1) [HB REQ]
   Client > Server: sctp (1) [ABORT]

when processing HB ACK packet in Router it calls sctp_new() to initialize
the new ct with vtag[REPLY] set to HB_ACK packet's vtag.

Later when sending DATA from Client, all the SACKs from Server will get
dropped in Router, as the SACK packet's vtag does not match vtag[REPLY]
in the ct. The worst thing is the vtag in this ct will never get fixed
by the upcoming packets from Server.

This patch fixes it by checking SCTP_CID_SHUTDOWN_ACK before setting
vtag[REPLY] in the ct in sctp_new() as the annotation says. With this
fix, it will leave vtag[REPLY] in ct to 0 in the case above, and the
next HB REQ/ACK from Server is able to fix the vtag as its value is 0
in nf_conntrack_sctp_packet().

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nf_conntrack_proto_sctp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/netfilter/nf_conntrack_proto_sctp.c b/net/netfilter/nf_conntrack_proto_sctp.c
index c94a9971d790..7ffd698497f2 100644
--- a/net/netfilter/nf_conntrack_proto_sctp.c
+++ b/net/netfilter/nf_conntrack_proto_sctp.c
@@ -299,7 +299,7 @@ sctp_new(struct nf_conn *ct, const struct sk_buff *skb,
 			pr_debug("Setting vtag %x for secondary conntrack\n",
 				 sh->vtag);
 			ct->proto.sctp.vtag[IP_CT_DIR_ORIGINAL] = sh->vtag;
-		} else {
+		} else if (sch->type == SCTP_CID_SHUTDOWN_ACK) {
 		/* If it is a shutdown ack OOTB packet, we expect a return
 		   shutdown complete, otherwise an ABORT Sec 8.4 (5) and (8) */
 			pr_debug("Setting vtag %x for new conn OOTB\n",
-- 
2.43.0

[PATCH AUTOSEL 5.15 13/23] ALSA: usb-audio: Ignore clock selector errors for single connection

[Sasha Levin]

From: Alexander Tsoy <alexander@tsoy.me>

[ Upstream commit eaa1b01fe709d6a236a9cec74813e0400601fd23 ]

For devices with multiple clock sources connected to a selector, we need
to check what a clock selector control request has returned. This is
needed to ensure that a requested clock source is indeed selected and for
autoclock feature to work.

For devices with single clock source connected, if we get an error there
is nothing else we can do about it. We can't skip clock selector setup as
it is required by some devices. So lets just ignore error in this case.

This should fix various buggy Mackie devices:

[  649.109785] usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -32)
[  649.111946] usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -32)
[  649.113822] usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -32)

There is also interesting info from the Windows documentation [1] (this
is probably why manufacturers dont't even test this feature):

"The USB Audio 2.0 driver doesn't support clock selection. The driver
uses the Clock Source Entity, which is selected by default and never
issues a Clock Selector Control SET CUR request."

Link: https://learn.microsoft.com/en-us/windows-hardware/drivers/audio/usb-2-0-audio-drivers [1]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217314
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218175
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218342
Signed-off-by: Alexander Tsoy <alexander@tsoy.me>
Link: https://lore.kernel.org/r/20240201115308.17838-1-alexander@tsoy.me
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/usb/clock.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/sound/usb/clock.c b/sound/usb/clock.c
index ccca9efa7d33..970e14ff54d1 100644
--- a/sound/usb/clock.c
+++ b/sound/usb/clock.c
@@ -328,8 +328,16 @@ static int __uac_clock_find_source(struct snd_usb_audio *chip,
 			if (chip->quirk_flags & QUIRK_FLAG_SKIP_CLOCK_SELECTOR)
 				return ret;
 			err = uac_clock_selector_set_val(chip, entity_id, cur);
-			if (err < 0)
+			if (err < 0) {
+				if (pins == 1) {
+					usb_audio_dbg(chip,
+						      "%s(): selector returned an error, "
+						      "assuming a firmware bug, id %d, ret %d\n",
+						      __func__, clock_id, err);
+					return ret;
+				}
 				return err;
+			}
 		}
 
 		if (!validate || ret > 0 || !chip->autoclock)
-- 
2.43.0

[PATCH AUTOSEL 5.15 14/23] nvme-fc: do not wait in vain when unloading module

[Sasha Levin]

From: Daniel Wagner <dwagner@suse.de>

[ Upstream commit 70fbfc47a392b98e5f8dba70c6efc6839205c982 ]

The module exit path has race between deleting all controllers and
freeing 'left over IDs'. To prevent double free a synchronization
between nvme_delete_ctrl and ida_destroy has been added by the initial
commit.

There is some logic around trying to prevent from hanging forever in
wait_for_completion, though it does not handling all cases. E.g.
blktests is able to reproduce the situation where the module unload
hangs forever.

If we completely rely on the cleanup code executed from the
nvme_delete_ctrl path, all IDs will be freed eventually. This makes
calling ida_destroy unnecessary. We only have to ensure that all
nvme_delete_ctrl code has been executed before we leave
nvme_fc_exit_module. This is done by flushing the nvme_delete_wq
workqueue.

While at it, remove the unused nvme_fc_wq workqueue too.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/fc.c | 47 ++++++------------------------------------
 1 file changed, 6 insertions(+), 41 deletions(-)

diff --git a/drivers/nvme/host/fc.c b/drivers/nvme/host/fc.c
index aa14ad963d91..8dfd317509aa 100644
--- a/drivers/nvme/host/fc.c
+++ b/drivers/nvme/host/fc.c
@@ -220,11 +220,6 @@ static LIST_HEAD(nvme_fc_lport_list);
 static DEFINE_IDA(nvme_fc_local_port_cnt);
 static DEFINE_IDA(nvme_fc_ctrl_cnt);
 
-static struct workqueue_struct *nvme_fc_wq;
-
-static bool nvme_fc_waiting_to_unload;
-static DECLARE_COMPLETION(nvme_fc_unload_proceed);
-
 /*
  * These items are short-term. They will eventually be moved into
  * a generic FC class. See comments in module init.
@@ -254,8 +249,6 @@ nvme_fc_free_lport(struct kref *ref)
 	/* remove from transport list */
 	spin_lock_irqsave(&nvme_fc_lock, flags);
 	list_del(&lport->port_list);
-	if (nvme_fc_waiting_to_unload && list_empty(&nvme_fc_lport_list))
-		complete(&nvme_fc_unload_proceed);
 	spin_unlock_irqrestore(&nvme_fc_lock, flags);
 
 	ida_simple_remove(&nvme_fc_local_port_cnt, lport->localport.port_num);
@@ -3904,10 +3897,6 @@ static int __init nvme_fc_init_module(void)
 {
 	int ret;
 
-	nvme_fc_wq = alloc_workqueue("nvme_fc_wq", WQ_MEM_RECLAIM, 0);
-	if (!nvme_fc_wq)
-		return -ENOMEM;
-
 	/*
 	 * NOTE:
 	 * It is expected that in the future the kernel will combine
@@ -3925,7 +3914,7 @@ static int __init nvme_fc_init_module(void)
 	ret = class_register(&fc_class);
 	if (ret) {
 		pr_err("couldn't register class fc\n");
-		goto out_destroy_wq;
+		return ret;
 	}
 
 	/*
@@ -3949,8 +3938,6 @@ static int __init nvme_fc_init_module(void)
 	device_destroy(&fc_class, MKDEV(0, 0));
 out_destroy_class:
 	class_unregister(&fc_class);
-out_destroy_wq:
-	destroy_workqueue(nvme_fc_wq);
 
 	return ret;
 }
@@ -3970,45 +3957,23 @@ nvme_fc_delete_controllers(struct nvme_fc_rport *rport)
 	spin_unlock(&rport->lock);
 }
 
-static void
-nvme_fc_cleanup_for_unload(void)
+static void __exit nvme_fc_exit_module(void)
 {
 	struct nvme_fc_lport *lport;
 	struct nvme_fc_rport *rport;
-
-	list_for_each_entry(lport, &nvme_fc_lport_list, port_list) {
-		list_for_each_entry(rport, &lport->endp_list, endp_list) {
-			nvme_fc_delete_controllers(rport);
-		}
-	}
-}
-
-static void __exit nvme_fc_exit_module(void)
-{
 	unsigned long flags;
-	bool need_cleanup = false;
 
 	spin_lock_irqsave(&nvme_fc_lock, flags);
-	nvme_fc_waiting_to_unload = true;
-	if (!list_empty(&nvme_fc_lport_list)) {
-		need_cleanup = true;
-		nvme_fc_cleanup_for_unload();
-	}
+	list_for_each_entry(lport, &nvme_fc_lport_list, port_list)
+		list_for_each_entry(rport, &lport->endp_list, endp_list)
+			nvme_fc_delete_controllers(rport);
 	spin_unlock_irqrestore(&nvme_fc_lock, flags);
-	if (need_cleanup) {
-		pr_info("%s: waiting for ctlr deletes\n", __func__);
-		wait_for_completion(&nvme_fc_unload_proceed);
-		pr_info("%s: ctrl deletes complete\n", __func__);
-	}
+	flush_workqueue(nvme_delete_wq);
 
 	nvmf_unregister_transport(&nvme_fc_transport);
 
-	ida_destroy(&nvme_fc_local_port_cnt);
-	ida_destroy(&nvme_fc_ctrl_cnt);
-
 	device_destroy(&fc_class, MKDEV(0, 0));
 	class_unregister(&fc_class);
-	destroy_workqueue(nvme_fc_wq);
 }
 
 module_init(nvme_fc_init_module);
-- 
2.43.0

[PATCH AUTOSEL 5.15 15/23] nvmet-fcloop: swap the list_add_tail arguments

[Sasha Levin]

From: Daniel Wagner <dwagner@suse.de>

[ Upstream commit dcfad4ab4d6733f2861cd241d8532a0004fc835a ]

The first argument of list_add_tail function is the new element which
should be added to the list which is the second argument. Swap the
arguments to allow processing more than one element at a time.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/target/fcloop.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/nvme/target/fcloop.c b/drivers/nvme/target/fcloop.c
index c780af36c1d4..f5b8442b653d 100644
--- a/drivers/nvme/target/fcloop.c
+++ b/drivers/nvme/target/fcloop.c
@@ -358,7 +358,7 @@ fcloop_h2t_ls_req(struct nvme_fc_local_port *localport,
 	if (!rport->targetport) {
 		tls_req->status = -ECONNREFUSED;
 		spin_lock(&rport->lock);
-		list_add_tail(&rport->ls_list, &tls_req->ls_list);
+		list_add_tail(&tls_req->ls_list, &rport->ls_list);
 		spin_unlock(&rport->lock);
 		queue_work(nvmet_wq, &rport->ls_work);
 		return ret;
@@ -391,7 +391,7 @@ fcloop_h2t_xmt_ls_rsp(struct nvmet_fc_target_port *targetport,
 	if (remoteport) {
 		rport = remoteport->private;
 		spin_lock(&rport->lock);
-		list_add_tail(&rport->ls_list, &tls_req->ls_list);
+		list_add_tail(&tls_req->ls_list, &rport->ls_list);
 		spin_unlock(&rport->lock);
 		queue_work(nvmet_wq, &rport->ls_work);
 	}
@@ -446,7 +446,7 @@ fcloop_t2h_ls_req(struct nvmet_fc_target_port *targetport, void *hosthandle,
 	if (!tport->remoteport) {
 		tls_req->status = -ECONNREFUSED;
 		spin_lock(&tport->lock);
-		list_add_tail(&tport->ls_list, &tls_req->ls_list);
+		list_add_tail(&tls_req->ls_list, &tport->ls_list);
 		spin_unlock(&tport->lock);
 		queue_work(nvmet_wq, &tport->ls_work);
 		return ret;
-- 
2.43.0

[PATCH AUTOSEL 5.15 16/23] nvmet-fc: release reference on target port

[Sasha Levin]

From: Daniel Wagner <dwagner@suse.de>

[ Upstream commit c691e6d7e13dab81ac8c7489c83b5dea972522a5 ]

In case we return early out of __nvmet_fc_finish_ls_req() we still have
to release the reference on the target port.

Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/target/fc.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/nvme/target/fc.c b/drivers/nvme/target/fc.c
index 00a2a591f5c1..80df50ed7e3a 100644
--- a/drivers/nvme/target/fc.c
+++ b/drivers/nvme/target/fc.c
@@ -359,7 +359,7 @@ __nvmet_fc_finish_ls_req(struct nvmet_fc_ls_req_op *lsop)
 
 	if (!lsop->req_queued) {
 		spin_unlock_irqrestore(&tgtport->lock, flags);
-		return;
+		goto out_puttgtport;
 	}
 
 	list_del(&lsop->lsreq_list);
@@ -372,6 +372,7 @@ __nvmet_fc_finish_ls_req(struct nvmet_fc_ls_req_op *lsop)
 				  (lsreq->rqstlen + lsreq->rsplen),
 				  DMA_BIDIRECTIONAL);
 
+out_puttgtport:
 	nvmet_fc_tgtport_put(tgtport);
 }
 
-- 
2.43.0

[PATCH AUTOSEL 5.15 17/23] nvmet-fc: defer cleanup using RCU properly

[Sasha Levin]

From: Daniel Wagner <dwagner@suse.de>

[ Upstream commit 4049dc96b8de7aeb3addcea039446e464726a525 ]

When the target executes a disconnect and the host triggers a reconnect
immediately, the reconnect command still finds an existing association.

The reconnect crashes later on because nvmet_fc_delete_target_assoc
blindly removes resources while the reconnect code wants to use it.

To address this, nvmet_fc_find_target_assoc should not be able to
lookup an association which is being removed. The association list
is already under RCU lifetime management, so let's properly use it
and remove the association from the list and wait for a grace period
before cleaning up all. This means we also can drop the RCU management
on the queues, because this is now handled via the association itself.

A second step split the execution context so that the initial disconnect
command can complete without running the reconnect code in the same
context. As usual, this is done by deferring the ->done to a workqueue.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/target/fc.c | 83 ++++++++++++++++++----------------------
 1 file changed, 37 insertions(+), 46 deletions(-)

diff --git a/drivers/nvme/target/fc.c b/drivers/nvme/target/fc.c
index 80df50ed7e3a..97f4ec37f36d 100644
--- a/drivers/nvme/target/fc.c
+++ b/drivers/nvme/target/fc.c
@@ -165,7 +165,7 @@ struct nvmet_fc_tgt_assoc {
 	struct nvmet_fc_hostport	*hostport;
 	struct nvmet_fc_ls_iod		*rcv_disconn;
 	struct list_head		a_list;
-	struct nvmet_fc_tgt_queue __rcu	*queues[NVMET_NR_QUEUES + 1];
+	struct nvmet_fc_tgt_queue 	*queues[NVMET_NR_QUEUES + 1];
 	struct kref			ref;
 	struct work_struct		del_work;
 	struct rcu_head			rcu;
@@ -802,14 +802,11 @@ nvmet_fc_alloc_target_queue(struct nvmet_fc_tgt_assoc *assoc,
 	if (!queue)
 		return NULL;
 
-	if (!nvmet_fc_tgt_a_get(assoc))
-		goto out_free_queue;
-
 	queue->work_q = alloc_workqueue("ntfc%d.%d.%d", 0, 0,
 				assoc->tgtport->fc_target_port.port_num,
 				assoc->a_id, qid);
 	if (!queue->work_q)
-		goto out_a_put;
+		goto out_free_queue;
 
 	queue->qid = qid;
 	queue->sqsize = sqsize;
@@ -831,15 +828,13 @@ nvmet_fc_alloc_target_queue(struct nvmet_fc_tgt_assoc *assoc,
 		goto out_fail_iodlist;
 
 	WARN_ON(assoc->queues[qid]);
-	rcu_assign_pointer(assoc->queues[qid], queue);
+	assoc->queues[qid] = queue;
 
 	return queue;
 
 out_fail_iodlist:
 	nvmet_fc_destroy_fcp_iodlist(assoc->tgtport, queue);
 	destroy_workqueue(queue->work_q);
-out_a_put:
-	nvmet_fc_tgt_a_put(assoc);
 out_free_queue:
 	kfree(queue);
 	return NULL;
@@ -852,12 +847,8 @@ nvmet_fc_tgt_queue_free(struct kref *ref)
 	struct nvmet_fc_tgt_queue *queue =
 		container_of(ref, struct nvmet_fc_tgt_queue, ref);
 
-	rcu_assign_pointer(queue->assoc->queues[queue->qid], NULL);
-
 	nvmet_fc_destroy_fcp_iodlist(queue->assoc->tgtport, queue);
 
-	nvmet_fc_tgt_a_put(queue->assoc);
-
 	destroy_workqueue(queue->work_q);
 
 	kfree_rcu(queue, rcu);
@@ -969,7 +960,7 @@ nvmet_fc_find_target_queue(struct nvmet_fc_tgtport *tgtport,
 	rcu_read_lock();
 	list_for_each_entry_rcu(assoc, &tgtport->assoc_list, a_list) {
 		if (association_id == assoc->association_id) {
-			queue = rcu_dereference(assoc->queues[qid]);
+			queue = assoc->queues[qid];
 			if (queue &&
 			    (!atomic_read(&queue->connected) ||
 			     !nvmet_fc_tgt_q_get(queue)))
@@ -1172,13 +1163,18 @@ nvmet_fc_target_assoc_free(struct kref *ref)
 	struct nvmet_fc_tgtport *tgtport = assoc->tgtport;
 	struct nvmet_fc_ls_iod	*oldls;
 	unsigned long flags;
+	int i;
+
+	for (i = NVMET_NR_QUEUES; i >= 0; i--) {
+		if (assoc->queues[i])
+			nvmet_fc_delete_target_queue(assoc->queues[i]);
+	}
 
 	/* Send Disconnect now that all i/o has completed */
 	nvmet_fc_xmt_disconnect_assoc(assoc);
 
 	nvmet_fc_free_hostport(assoc->hostport);
 	spin_lock_irqsave(&tgtport->lock, flags);
-	list_del_rcu(&assoc->a_list);
 	oldls = assoc->rcv_disconn;
 	spin_unlock_irqrestore(&tgtport->lock, flags);
 	/* if pending Rcv Disconnect Association LS, send rsp now */
@@ -1208,7 +1204,7 @@ static void
 nvmet_fc_delete_target_assoc(struct nvmet_fc_tgt_assoc *assoc)
 {
 	struct nvmet_fc_tgtport *tgtport = assoc->tgtport;
-	struct nvmet_fc_tgt_queue *queue;
+	unsigned long flags;
 	int i, terminating;
 
 	terminating = atomic_xchg(&assoc->terminating, 1);
@@ -1217,29 +1213,21 @@ nvmet_fc_delete_target_assoc(struct nvmet_fc_tgt_assoc *assoc)
 	if (terminating)
 		return;
 
+	spin_lock_irqsave(&tgtport->lock, flags);
+	list_del_rcu(&assoc->a_list);
+	spin_unlock_irqrestore(&tgtport->lock, flags);
 
-	for (i = NVMET_NR_QUEUES; i >= 0; i--) {
-		rcu_read_lock();
-		queue = rcu_dereference(assoc->queues[i]);
-		if (!queue) {
-			rcu_read_unlock();
-			continue;
-		}
+	synchronize_rcu();
 
-		if (!nvmet_fc_tgt_q_get(queue)) {
-			rcu_read_unlock();
-			continue;
-		}
-		rcu_read_unlock();
-		nvmet_fc_delete_target_queue(queue);
-		nvmet_fc_tgt_q_put(queue);
+	/* ensure all in-flight I/Os have been processed */
+	for (i = NVMET_NR_QUEUES; i >= 0; i--) {
+		if (assoc->queues[i])
+			flush_workqueue(assoc->queues[i]->work_q);
 	}
 
 	dev_info(tgtport->dev,
 		"{%d:%d} Association deleted\n",
 		tgtport->fc_target_port.port_num, assoc->a_id);
-
-	nvmet_fc_tgt_a_put(assoc);
 }
 
 static struct nvmet_fc_tgt_assoc *
@@ -1492,9 +1480,8 @@ __nvmet_fc_free_assocs(struct nvmet_fc_tgtport *tgtport)
 	list_for_each_entry_rcu(assoc, &tgtport->assoc_list, a_list) {
 		if (!nvmet_fc_tgt_a_get(assoc))
 			continue;
-		if (!queue_work(nvmet_wq, &assoc->del_work))
-			/* already deleting - release local reference */
-			nvmet_fc_tgt_a_put(assoc);
+		queue_work(nvmet_wq, &assoc->del_work);
+		nvmet_fc_tgt_a_put(assoc);
 	}
 	rcu_read_unlock();
 }
@@ -1547,9 +1534,8 @@ nvmet_fc_invalidate_host(struct nvmet_fc_target_port *target_port,
 			continue;
 		assoc->hostport->invalid = 1;
 		noassoc = false;
-		if (!queue_work(nvmet_wq, &assoc->del_work))
-			/* already deleting - release local reference */
-			nvmet_fc_tgt_a_put(assoc);
+		queue_work(nvmet_wq, &assoc->del_work);
+		nvmet_fc_tgt_a_put(assoc);
 	}
 	spin_unlock_irqrestore(&tgtport->lock, flags);
 
@@ -1581,7 +1567,7 @@ nvmet_fc_delete_ctrl(struct nvmet_ctrl *ctrl)
 
 		rcu_read_lock();
 		list_for_each_entry_rcu(assoc, &tgtport->assoc_list, a_list) {
-			queue = rcu_dereference(assoc->queues[0]);
+			queue = assoc->queues[0];
 			if (queue && queue->nvme_sq.ctrl == ctrl) {
 				if (nvmet_fc_tgt_a_get(assoc))
 					found_ctrl = true;
@@ -1593,9 +1579,8 @@ nvmet_fc_delete_ctrl(struct nvmet_ctrl *ctrl)
 		nvmet_fc_tgtport_put(tgtport);
 
 		if (found_ctrl) {
-			if (!queue_work(nvmet_wq, &assoc->del_work))
-				/* already deleting - release local reference */
-				nvmet_fc_tgt_a_put(assoc);
+			queue_work(nvmet_wq, &assoc->del_work);
+			nvmet_fc_tgt_a_put(assoc);
 			return;
 		}
 
@@ -1625,6 +1610,8 @@ nvmet_fc_unregister_targetport(struct nvmet_fc_target_port *target_port)
 	/* terminate any outstanding associations */
 	__nvmet_fc_free_assocs(tgtport);
 
+	flush_workqueue(nvmet_wq);
+
 	/*
 	 * should terminate LS's as well. However, LS's will be generated
 	 * at the tail end of association termination, so they likely don't
@@ -1870,9 +1857,6 @@ nvmet_fc_ls_disconnect(struct nvmet_fc_tgtport *tgtport,
 				sizeof(struct fcnvme_ls_disconnect_assoc_acc)),
 			FCNVME_LS_DISCONNECT_ASSOC);
 
-	/* release get taken in nvmet_fc_find_target_assoc */
-	nvmet_fc_tgt_a_put(assoc);
-
 	/*
 	 * The rules for LS response says the response cannot
 	 * go back until ABTS's have been sent for all outstanding
@@ -1887,8 +1871,6 @@ nvmet_fc_ls_disconnect(struct nvmet_fc_tgtport *tgtport,
 	assoc->rcv_disconn = iod;
 	spin_unlock_irqrestore(&tgtport->lock, flags);
 
-	nvmet_fc_delete_target_assoc(assoc);
-
 	if (oldls) {
 		dev_info(tgtport->dev,
 			"{%d:%d} Multiple Disconnect Association LS's "
@@ -1904,6 +1886,9 @@ nvmet_fc_ls_disconnect(struct nvmet_fc_tgtport *tgtport,
 		nvmet_fc_xmt_ls_rsp(tgtport, oldls);
 	}
 
+	queue_work(nvmet_wq, &assoc->del_work);
+	nvmet_fc_tgt_a_put(assoc);
+
 	return false;
 }
 
@@ -2902,6 +2887,9 @@ nvmet_fc_remove_port(struct nvmet_port *port)
 
 	nvmet_fc_portentry_unbind(pe);
 
+	/* terminate any outstanding associations */
+	__nvmet_fc_free_assocs(pe->tgtport);
+
 	kfree(pe);
 }
 
@@ -2933,6 +2921,9 @@ static int __init nvmet_fc_init_module(void)
 
 static void __exit nvmet_fc_exit_module(void)
 {
+	/* ensure any shutdown operation, e.g. delete ctrls have finished */
+	flush_workqueue(nvmet_wq);
+
 	/* sanity check - all lports should be removed */
 	if (!list_empty(&nvmet_fc_target_list))
 		pr_warn("%s: targetport list not empty\n", __func__);
-- 
2.43.0

[PATCH AUTOSEL 5.15 18/23] nvmet-fc: hold reference on hostport match

[Sasha Levin]

From: Daniel Wagner <dwagner@suse.de>

[ Upstream commit ca121a0f7515591dba0eb5532bfa7ace4dc153ce ]

The hostport data structure is shared between the association, this why
we keep track of the users via a refcount. So we should not decrement
the refcount on a match and free the hostport several times.

Reported by KASAN.

Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/target/fc.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/nvme/target/fc.c b/drivers/nvme/target/fc.c
index 97f4ec37f36d..06d11bb7b944 100644
--- a/drivers/nvme/target/fc.c
+++ b/drivers/nvme/target/fc.c
@@ -1069,8 +1069,6 @@ nvmet_fc_alloc_hostport(struct nvmet_fc_tgtport *tgtport, void *hosthandle)
 		/* new allocation not needed */
 		kfree(newhost);
 		newhost = match;
-		/* no new allocation - release reference */
-		nvmet_fc_tgtport_put(tgtport);
 	} else {
 		newhost->tgtport = tgtport;
 		newhost->hosthandle = hosthandle;
-- 
2.43.0

[PATCH AUTOSEL 5.15 19/23] nvmet-fc: abort command when there is no binding

[Sasha Levin]

From: Daniel Wagner <dwagner@suse.de>

[ Upstream commit 3146345c2e9c2f661527054e402b0cfad80105a4 ]

When the target port has not active port binding, there is no point in
trying to process the command as it has to fail anyway. Instead adding
checks to all commands abort the command early.

Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/target/fc.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/nvme/target/fc.c b/drivers/nvme/target/fc.c
index 06d11bb7b944..20d3013be08a 100644
--- a/drivers/nvme/target/fc.c
+++ b/drivers/nvme/target/fc.c
@@ -1101,6 +1101,9 @@ nvmet_fc_alloc_target_assoc(struct nvmet_fc_tgtport *tgtport, void *hosthandle)
 	int idx;
 	bool needrandom = true;
 
+	if (!tgtport->pe)
+		return NULL;
+
 	assoc = kzalloc(sizeof(*assoc), GFP_KERNEL);
 	if (!assoc)
 		return NULL;
@@ -2523,8 +2526,9 @@ nvmet_fc_handle_fcp_rqst(struct nvmet_fc_tgtport *tgtport,
 
 	fod->req.cmd = &fod->cmdiubuf.sqe;
 	fod->req.cqe = &fod->rspiubuf.cqe;
-	if (tgtport->pe)
-		fod->req.port = tgtport->pe->port;
+	if (!tgtport->pe)
+		goto transport_error;
+	fod->req.port = tgtport->pe->port;
 
 	/* clear any response payload */
 	memset(&fod->rspiubuf, 0, sizeof(fod->rspiubuf));
-- 
2.43.0

[PATCH AUTOSEL 5.15 20/23] nvmet-fc: avoid deadlock on delete association path

[Sasha Levin]

From: Daniel Wagner <dwagner@suse.de>

[ Upstream commit 710c69dbaccdac312e32931abcb8499c1525d397 ]

When deleting an association the shutdown path is deadlocking because we
try to flush the nvmet_wq nested. Avoid this by deadlock by deferring
the put work into its own work item.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/target/fc.c | 16 +++++++++++++---
 1 file changed, 13 insertions(+), 3 deletions(-)

diff --git a/drivers/nvme/target/fc.c b/drivers/nvme/target/fc.c
index 20d3013be08a..1ef075b159b9 100644
--- a/drivers/nvme/target/fc.c
+++ b/drivers/nvme/target/fc.c
@@ -111,6 +111,8 @@ struct nvmet_fc_tgtport {
 	struct nvmet_fc_port_entry	*pe;
 	struct kref			ref;
 	u32				max_sg_cnt;
+
+	struct work_struct		put_work;
 };
 
 struct nvmet_fc_port_entry {
@@ -248,6 +250,13 @@ static int nvmet_fc_tgt_a_get(struct nvmet_fc_tgt_assoc *assoc);
 static void nvmet_fc_tgt_q_put(struct nvmet_fc_tgt_queue *queue);
 static int nvmet_fc_tgt_q_get(struct nvmet_fc_tgt_queue *queue);
 static void nvmet_fc_tgtport_put(struct nvmet_fc_tgtport *tgtport);
+static void nvmet_fc_put_tgtport_work(struct work_struct *work)
+{
+	struct nvmet_fc_tgtport *tgtport =
+		container_of(work, struct nvmet_fc_tgtport, put_work);
+
+	nvmet_fc_tgtport_put(tgtport);
+}
 static int nvmet_fc_tgtport_get(struct nvmet_fc_tgtport *tgtport);
 static void nvmet_fc_handle_fcp_rqst(struct nvmet_fc_tgtport *tgtport,
 					struct nvmet_fc_fcp_iod *fod);
@@ -359,7 +368,7 @@ __nvmet_fc_finish_ls_req(struct nvmet_fc_ls_req_op *lsop)
 
 	if (!lsop->req_queued) {
 		spin_unlock_irqrestore(&tgtport->lock, flags);
-		goto out_puttgtport;
+		goto out_putwork;
 	}
 
 	list_del(&lsop->lsreq_list);
@@ -372,8 +381,8 @@ __nvmet_fc_finish_ls_req(struct nvmet_fc_ls_req_op *lsop)
 				  (lsreq->rqstlen + lsreq->rsplen),
 				  DMA_BIDIRECTIONAL);
 
-out_puttgtport:
-	nvmet_fc_tgtport_put(tgtport);
+out_putwork:
+	queue_work(nvmet_wq, &tgtport->put_work);
 }
 
 static int
@@ -1404,6 +1413,7 @@ nvmet_fc_register_targetport(struct nvmet_fc_port_info *pinfo,
 	kref_init(&newrec->ref);
 	ida_init(&newrec->assoc_cnt);
 	newrec->max_sg_cnt = template->max_sgl_segments;
+	INIT_WORK(&newrec->put_work, nvmet_fc_put_tgtport_work);
 
 	ret = nvmet_fc_alloc_ls_iodlist(newrec);
 	if (ret) {
-- 
2.43.0

[PATCH AUTOSEL 5.15 21/23] nvmet-fc: take ref count on tgtport before delete assoc

[Sasha Levin]

From: Daniel Wagner <dwagner@suse.de>

[ Upstream commit fe506a74589326183297d5abdda02d0c76ae5a8b ]

We have to ensure that the tgtport is not going away
before be have remove all the associations.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/target/fc.c | 31 +++++++++++++++++++++++--------
 1 file changed, 23 insertions(+), 8 deletions(-)

diff --git a/drivers/nvme/target/fc.c b/drivers/nvme/target/fc.c
index 1ef075b159b9..d3ca59ae4c7a 100644
--- a/drivers/nvme/target/fc.c
+++ b/drivers/nvme/target/fc.c
@@ -1092,13 +1092,28 @@ nvmet_fc_alloc_hostport(struct nvmet_fc_tgtport *tgtport, void *hosthandle)
 }
 
 static void
-nvmet_fc_delete_assoc(struct work_struct *work)
+nvmet_fc_delete_assoc(struct nvmet_fc_tgt_assoc *assoc)
+{
+	nvmet_fc_delete_target_assoc(assoc);
+	nvmet_fc_tgt_a_put(assoc);
+}
+
+static void
+nvmet_fc_delete_assoc_work(struct work_struct *work)
 {
 	struct nvmet_fc_tgt_assoc *assoc =
 		container_of(work, struct nvmet_fc_tgt_assoc, del_work);
+	struct nvmet_fc_tgtport *tgtport = assoc->tgtport;
 
-	nvmet_fc_delete_target_assoc(assoc);
-	nvmet_fc_tgt_a_put(assoc);
+	nvmet_fc_delete_assoc(assoc);
+	nvmet_fc_tgtport_put(tgtport);
+}
+
+static void
+nvmet_fc_schedule_delete_assoc(struct nvmet_fc_tgt_assoc *assoc)
+{
+	nvmet_fc_tgtport_get(assoc->tgtport);
+	queue_work(nvmet_wq, &assoc->del_work);
 }
 
 static struct nvmet_fc_tgt_assoc *
@@ -1132,7 +1147,7 @@ nvmet_fc_alloc_target_assoc(struct nvmet_fc_tgtport *tgtport, void *hosthandle)
 	assoc->a_id = idx;
 	INIT_LIST_HEAD(&assoc->a_list);
 	kref_init(&assoc->ref);
-	INIT_WORK(&assoc->del_work, nvmet_fc_delete_assoc);
+	INIT_WORK(&assoc->del_work, nvmet_fc_delete_assoc_work);
 	atomic_set(&assoc->terminating, 0);
 
 	while (needrandom) {
@@ -1491,7 +1506,7 @@ __nvmet_fc_free_assocs(struct nvmet_fc_tgtport *tgtport)
 	list_for_each_entry_rcu(assoc, &tgtport->assoc_list, a_list) {
 		if (!nvmet_fc_tgt_a_get(assoc))
 			continue;
-		queue_work(nvmet_wq, &assoc->del_work);
+		nvmet_fc_schedule_delete_assoc(assoc);
 		nvmet_fc_tgt_a_put(assoc);
 	}
 	rcu_read_unlock();
@@ -1545,7 +1560,7 @@ nvmet_fc_invalidate_host(struct nvmet_fc_target_port *target_port,
 			continue;
 		assoc->hostport->invalid = 1;
 		noassoc = false;
-		queue_work(nvmet_wq, &assoc->del_work);
+		nvmet_fc_schedule_delete_assoc(assoc);
 		nvmet_fc_tgt_a_put(assoc);
 	}
 	spin_unlock_irqrestore(&tgtport->lock, flags);
@@ -1590,7 +1605,7 @@ nvmet_fc_delete_ctrl(struct nvmet_ctrl *ctrl)
 		nvmet_fc_tgtport_put(tgtport);
 
 		if (found_ctrl) {
-			queue_work(nvmet_wq, &assoc->del_work);
+			nvmet_fc_schedule_delete_assoc(assoc);
 			nvmet_fc_tgt_a_put(assoc);
 			return;
 		}
@@ -1897,7 +1912,7 @@ nvmet_fc_ls_disconnect(struct nvmet_fc_tgtport *tgtport,
 		nvmet_fc_xmt_ls_rsp(tgtport, oldls);
 	}
 
-	queue_work(nvmet_wq, &assoc->del_work);
+	nvmet_fc_schedule_delete_assoc(assoc);
 	nvmet_fc_tgt_a_put(assoc);
 
 	return false;
-- 
2.43.0

[PATCH AUTOSEL 5.15 22/23] ext4: correct the hole length returned by ext4_map_blocks()

[Sasha Levin]

From: Zhang Yi <yi.zhang@huawei.com>

[ Upstream commit 6430dea07e85958fa87d0276c0c4388dd51e630b ]

In ext4_map_blocks(), if we can't find a range of mapping in the
extents cache, we are calling ext4_ext_map_blocks() to search the real
path and ext4_ext_determine_hole() to determine the hole range. But if
the querying range was partially or completely overlaped by a delalloc
extent, we can't find it in the real extent path, so the returned hole
length could be incorrect.

Fortunately, ext4_ext_put_gap_in_cache() have already handle delalloc
extent, but it searches start from the expanded hole_start, doesn't
start from the querying range, so the delalloc extent found could not be
the one that overlaped the querying range, plus, it also didn't adjust
the hole length. Let's just remove ext4_ext_put_gap_in_cache(), handle
delalloc and insert adjusted hole extent in ext4_ext_determine_hole().

Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20240127015825.1608160-4-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ext4/extents.c | 111 +++++++++++++++++++++++++++++-----------------
 1 file changed, 70 insertions(+), 41 deletions(-)

diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c
index 592be39e3d51..cece004b32d5 100644
--- a/fs/ext4/extents.c
+++ b/fs/ext4/extents.c
@@ -2227,7 +2227,7 @@ static int ext4_fill_es_cache_info(struct inode *inode,
 
 
 /*
- * ext4_ext_determine_hole - determine hole around given block
+ * ext4_ext_find_hole - find hole around given block according to the given path
  * @inode:	inode we lookup in
  * @path:	path in extent tree to @lblk
  * @lblk:	pointer to logical block around which we want to determine hole
@@ -2239,9 +2239,9 @@ static int ext4_fill_es_cache_info(struct inode *inode,
  * The function returns the length of a hole starting at @lblk. We update @lblk
  * to the beginning of the hole if we managed to find it.
  */
-static ext4_lblk_t ext4_ext_determine_hole(struct inode *inode,
-					   struct ext4_ext_path *path,
-					   ext4_lblk_t *lblk)
+static ext4_lblk_t ext4_ext_find_hole(struct inode *inode,
+				      struct ext4_ext_path *path,
+				      ext4_lblk_t *lblk)
 {
 	int depth = ext_depth(inode);
 	struct ext4_extent *ex;
@@ -2268,30 +2268,6 @@ static ext4_lblk_t ext4_ext_determine_hole(struct inode *inode,
 	return len;
 }
 
-/*
- * ext4_ext_put_gap_in_cache:
- * calculate boundaries of the gap that the requested block fits into
- * and cache this gap
- */
-static void
-ext4_ext_put_gap_in_cache(struct inode *inode, ext4_lblk_t hole_start,
-			  ext4_lblk_t hole_len)
-{
-	struct extent_status es;
-
-	ext4_es_find_extent_range(inode, &ext4_es_is_delayed, hole_start,
-				  hole_start + hole_len - 1, &es);
-	if (es.es_len) {
-		/* There's delayed extent containing lblock? */
-		if (es.es_lblk <= hole_start)
-			return;
-		hole_len = min(es.es_lblk - hole_start, hole_len);
-	}
-	ext_debug(inode, " -> %u:%u\n", hole_start, hole_len);
-	ext4_es_insert_extent(inode, hole_start, hole_len, ~0,
-			      EXTENT_STATUS_HOLE);
-}
-
 /*
  * ext4_ext_rm_idx:
  * removes index from the index block.
@@ -4064,6 +4040,69 @@ static int get_implied_cluster_alloc(struct super_block *sb,
 	return 0;
 }
 
+/*
+ * Determine hole length around the given logical block, first try to
+ * locate and expand the hole from the given @path, and then adjust it
+ * if it's partially or completely converted to delayed extents, insert
+ * it into the extent cache tree if it's indeed a hole, finally return
+ * the length of the determined extent.
+ */
+static ext4_lblk_t ext4_ext_determine_insert_hole(struct inode *inode,
+						  struct ext4_ext_path *path,
+						  ext4_lblk_t lblk)
+{
+	ext4_lblk_t hole_start, len;
+	struct extent_status es;
+
+	hole_start = lblk;
+	len = ext4_ext_find_hole(inode, path, &hole_start);
+again:
+	ext4_es_find_extent_range(inode, &ext4_es_is_delayed, hole_start,
+				  hole_start + len - 1, &es);
+	if (!es.es_len)
+		goto insert_hole;
+
+	/*
+	 * There's a delalloc extent in the hole, handle it if the delalloc
+	 * extent is in front of, behind and straddle the queried range.
+	 */
+	if (lblk >= es.es_lblk + es.es_len) {
+		/*
+		 * The delalloc extent is in front of the queried range,
+		 * find again from the queried start block.
+		 */
+		len -= lblk - hole_start;
+		hole_start = lblk;
+		goto again;
+	} else if (in_range(lblk, es.es_lblk, es.es_len)) {
+		/*
+		 * The delalloc extent containing lblk, it must have been
+		 * added after ext4_map_blocks() checked the extent status
+		 * tree, adjust the length to the delalloc extent's after
+		 * lblk.
+		 */
+		len = es.es_lblk + es.es_len - lblk;
+		return len;
+	} else {
+		/*
+		 * The delalloc extent is partially or completely behind
+		 * the queried range, update hole length until the
+		 * beginning of the delalloc extent.
+		 */
+		len = min(es.es_lblk - hole_start, len);
+	}
+
+insert_hole:
+	/* Put just found gap into cache to speed up subsequent requests */
+	ext_debug(inode, " -> %u:%u\n", hole_start, len);
+	ext4_es_insert_extent(inode, hole_start, len, ~0, EXTENT_STATUS_HOLE);
+
+	/* Update hole_len to reflect hole size after lblk */
+	if (hole_start != lblk)
+		len -= lblk - hole_start;
+
+	return len;
+}
 
 /*
  * Block allocation/map/preallocation routine for extents based files
@@ -4181,22 +4220,12 @@ int ext4_ext_map_blocks(handle_t *handle, struct inode *inode,
 	 * we couldn't try to create block if create flag is zero
 	 */
 	if ((flags & EXT4_GET_BLOCKS_CREATE) == 0) {
-		ext4_lblk_t hole_start, hole_len;
+		ext4_lblk_t len;
 
-		hole_start = map->m_lblk;
-		hole_len = ext4_ext_determine_hole(inode, path, &hole_start);
-		/*
-		 * put just found gap into cache to speed up
-		 * subsequent requests
-		 */
-		ext4_ext_put_gap_in_cache(inode, hole_start, hole_len);
+		len = ext4_ext_determine_insert_hole(inode, path, map->m_lblk);
 
-		/* Update hole_len to reflect hole size after map->m_lblk */
-		if (hole_start != map->m_lblk)
-			hole_len -= map->m_lblk - hole_start;
 		map->m_pblk = 0;
-		map->m_len = min_t(unsigned int, map->m_len, hole_len);
-
+		map->m_len = min_t(unsigned int, map->m_len, len);
 		goto out;
 	}
 
-- 
2.43.0

[PATCH AUTOSEL 5.15 23/23] Input: i8042 - add Fujitsu Lifebook U728 to i8042 quirk table

[Sasha Levin]

From: Szilard Fabian <szfabian@bluemarch.art>

[ Upstream commit 4255447ad34c5c3785fcdcf76cfa0271d6e5ed39 ]

Another Fujitsu-related patch.

In the initial boot stage the integrated keyboard of Fujitsu Lifebook U728
refuses to work and it's not possible to type for example a dm-crypt
passphrase without the help of an external keyboard.

i8042.nomux kernel parameter resolves this issue but using that a PS/2
mouse is detected. This input device is unused even when the i2c-hid-acpi
kernel module is blacklisted making the integrated ELAN touchpad
(04F3:3092) not working at all.

So this notebook uses a hid-over-i2c touchpad which is managed by the
i2c_designware input driver. Since you can't find a PS/2 mouse port on this
computer and you can't connect a PS/2 mouse to it even with an official
port replicator I think it's safe to not use the PS/2 mouse port at all.

Signed-off-by: Szilard Fabian <szfabian@bluemarch.art>
Link: https://lore.kernel.org/r/20240103014717.127307-2-szfabian@bluemarch.art
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/input/serio/i8042-acpipnpio.h | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/input/serio/i8042-acpipnpio.h b/drivers/input/serio/i8042-acpipnpio.h
index 6af38f53154b..37b87e05cf0b 100644
--- a/drivers/input/serio/i8042-acpipnpio.h
+++ b/drivers/input/serio/i8042-acpipnpio.h
@@ -625,6 +625,14 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = {
 		},
 		.driver_data = (void *)(SERIO_QUIRK_NOAUX)
 	},
+	{
+		/* Fujitsu Lifebook U728 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK U728"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOAUX)
+	},
 	{
 		/* Gigabyte M912 */
 		.matches = {
-- 
2.43.0