[PATCH AUTOSEL 5.4 1/7] ext4: avoid allocating blocks from corrupted group in ext4_mb_try_best_found()

[PATCH AUTOSEL 5.4 1/7] ext4: avoid allocating blocks from corrupted group in ext4_mb_try_best_found()

[Sasha Levin]

From: Baokun Li <libaokun1@huawei.com>

[ Upstream commit 4530b3660d396a646aad91a787b6ab37cf604b53 ]

Determine if the group block bitmap is corrupted before using ac_b_ex in
ext4_mb_try_best_found() to avoid allocating blocks from a group with a
corrupted block bitmap in the following concurrency and making the
situation worse.

ext4_mb_regular_allocator
  ext4_lock_group(sb, group)
  ext4_mb_good_group
   // check if the group bbitmap is corrupted
  ext4_mb_complex_scan_group
   // Scan group gets ac_b_ex but doesn't use it
  ext4_unlock_group(sb, group)
                           ext4_mark_group_bitmap_corrupted(group)
                           // The block bitmap was corrupted during
                           // the group unlock gap.
  ext4_mb_try_best_found
    ext4_lock_group(ac->ac_sb, group)
    ext4_mb_use_best_found
      mb_mark_used
      // Allocating blocks in block bitmap corrupted group

Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20240104142040.2835097-7-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ext4/mballoc.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c
index 9e5aa625ab30..c1af95898aa4 100644
--- a/fs/ext4/mballoc.c
+++ b/fs/ext4/mballoc.c
@@ -1802,6 +1802,9 @@ int ext4_mb_try_best_found(struct ext4_allocation_context *ac,
 		return err;
 
 	ext4_lock_group(ac->ac_sb, group);
+	if (unlikely(EXT4_MB_GRP_BBITMAP_CORRUPT(e4b->bd_info)))
+		goto out;
+
 	max = mb_find_extent(e4b, ex.fe_start, ex.fe_len, &ex);
 
 	if (max > 0) {
@@ -1809,6 +1812,7 @@ int ext4_mb_try_best_found(struct ext4_allocation_context *ac,
 		ext4_mb_use_best_found(ac, e4b);
 	}
 
+out:
 	ext4_unlock_group(ac->ac_sb, group);
 	ext4_mb_unload_buddy(e4b);
 
-- 
2.43.0

[PATCH AUTOSEL 5.4 2/7] ext4: avoid allocating blocks from corrupted group in ext4_mb_find_by_goal()

[Sasha Levin]

From: Baokun Li <libaokun1@huawei.com>

[ Upstream commit 832698373a25950942c04a512daa652c18a9b513 ]

Places the logic for checking if the group's block bitmap is corrupt under
the protection of the group lock to avoid allocating blocks from the group
with a corrupted block bitmap.

Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20240104142040.2835097-8-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ext4/mballoc.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c
index c1af95898aa4..3acc76b1ac91 100644
--- a/fs/ext4/mballoc.c
+++ b/fs/ext4/mballoc.c
@@ -1839,12 +1839,10 @@ int ext4_mb_find_by_goal(struct ext4_allocation_context *ac,
 	if (err)
 		return err;
 
-	if (unlikely(EXT4_MB_GRP_BBITMAP_CORRUPT(e4b->bd_info))) {
-		ext4_mb_unload_buddy(e4b);
-		return 0;
-	}
-
 	ext4_lock_group(ac->ac_sb, group);
+	if (unlikely(EXT4_MB_GRP_BBITMAP_CORRUPT(e4b->bd_info)))
+		goto out;
+
 	max = mb_find_extent(e4b, ac->ac_g_ex.fe_start,
 			     ac->ac_g_ex.fe_len, &ex);
 	ex.fe_logical = 0xDEADFA11; /* debug value */
@@ -1877,6 +1875,7 @@ int ext4_mb_find_by_goal(struct ext4_allocation_context *ac,
 		ac->ac_b_ex = ex;
 		ext4_mb_use_best_found(ac, e4b);
 	}
+out:
 	ext4_unlock_group(ac->ac_sb, group);
 	ext4_mb_unload_buddy(e4b);
 
-- 
2.43.0

[PATCH AUTOSEL 5.4 3/7] regulator: pwm-regulator: Add validity checks in continuous .get_voltage

[Sasha Levin]

From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

[ Upstream commit c92688cac239794e4a1d976afa5203a4d3a2ac0e ]

Continuous regulators can be configured to operate only in a certain
duty cycle range (for example from 0..91%). Add a check to error out if
the duty cycle translates to an unsupported (or out of range) voltage.

Suggested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://msgid.link/r/20240113224628.377993-2-martin.blumenstingl@googlemail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/regulator/pwm-regulator.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/regulator/pwm-regulator.c b/drivers/regulator/pwm-regulator.c
index 0a9d61a91f43..1b06aaaaf8b8 100644
--- a/drivers/regulator/pwm-regulator.c
+++ b/drivers/regulator/pwm-regulator.c
@@ -158,6 +158,9 @@ static int pwm_regulator_get_voltage(struct regulator_dev *rdev)
 	pwm_get_state(drvdata->pwm, &pstate);
 
 	voltage = pwm_get_relative_duty_cycle(&pstate, duty_unit);
+	if (voltage < min(max_uV_duty, min_uV_duty) ||
+	    voltage > max(max_uV_duty, min_uV_duty))
+		return -ENOTRECOVERABLE;
 
 	/*
 	 * The dutycycle for min_uV might be greater than the one for max_uV.
-- 
2.43.0

[PATCH AUTOSEL 5.4 4/7] nvmet-tcp: fix nvme tcp ida memory leak

[Sasha Levin]

From: Guixin Liu <kanie@linux.alibaba.com>

[ Upstream commit 47c5dd66c1840524572dcdd956f4af2bdb6fbdff ]

The nvmet_tcp_queue_ida should be destroy when the nvmet-tcp module
exit.

Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/target/tcp.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/nvme/target/tcp.c b/drivers/nvme/target/tcp.c
index be9e97657557..d40bd57537ba 100644
--- a/drivers/nvme/target/tcp.c
+++ b/drivers/nvme/target/tcp.c
@@ -1817,6 +1817,7 @@ static void __exit nvmet_tcp_exit(void)
 	flush_scheduled_work();
 
 	destroy_workqueue(nvmet_tcp_wq);
+	ida_destroy(&nvmet_tcp_queue_ida);
 }
 
 module_init(nvmet_tcp_init);
-- 
2.43.0

[PATCH AUTOSEL 5.4 5/7] ASoC: sunxi: sun4i-spdif: Add support for Allwinner H616

[Sasha Levin]

From: Chen-Yu Tsai <wens@csie.org>

[ Upstream commit 0adf963b8463faa44653e22e56ce55f747e68868 ]

The SPDIF hardware block found in the H616 SoC has the same layout as
the one found in the H6 SoC, except that it is missing the receiver
side.

Since the driver currently only supports the transmit function, support
for the H616 is identical to what is currently done for the H6.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://msgid.link/r/20240127163247.384439-4-wens@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/sunxi/sun4i-spdif.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/sound/soc/sunxi/sun4i-spdif.c b/sound/soc/sunxi/sun4i-spdif.c
index cbe598b0fb10..680d64e0d69f 100644
--- a/sound/soc/sunxi/sun4i-spdif.c
+++ b/sound/soc/sunxi/sun4i-spdif.c
@@ -464,6 +464,11 @@ static const struct of_device_id sun4i_spdif_of_match[] = {
 		.compatible = "allwinner,sun50i-h6-spdif",
 		.data = &sun50i_h6_spdif_quirks,
 	},
+	{
+		.compatible = "allwinner,sun50i-h616-spdif",
+		/* Essentially the same as the H6, but without RX */
+		.data = &sun50i_h6_spdif_quirks,
+	},
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, sun4i_spdif_of_match);
-- 
2.43.0

[PATCH AUTOSEL 5.4 6/7] netfilter: conntrack: check SCTP_CID_SHUTDOWN_ACK for vtag setting in sctp_new

[Sasha Levin]

From: Xin Long <lucien.xin@gmail.com>

[ Upstream commit 6e348067ee4bc5905e35faa3a8fafa91c9124bc7 ]

The annotation says in sctp_new(): "If it is a shutdown ack OOTB packet, we
expect a return shutdown complete, otherwise an ABORT Sec 8.4 (5) and (8)".
However, it does not check SCTP_CID_SHUTDOWN_ACK before setting vtag[REPLY]
in the conntrack entry(ct).

Because of that, if the ct in Router disappears for some reason in [1]
with the packet sequence like below:

   Client > Server: sctp (1) [INIT] [init tag: 3201533963]
   Server > Client: sctp (1) [INIT ACK] [init tag: 972498433]
   Client > Server: sctp (1) [COOKIE ECHO]
   Server > Client: sctp (1) [COOKIE ACK]
   Client > Server: sctp (1) [DATA] (B)(E) [TSN: 3075057809]
   Server > Client: sctp (1) [SACK] [cum ack 3075057809]
   Server > Client: sctp (1) [HB REQ]
   (the ct in Router disappears somehow)  <-------- [1]
   Client > Server: sctp (1) [HB ACK]
   Client > Server: sctp (1) [DATA] (B)(E) [TSN: 3075057810]
   Client > Server: sctp (1) [DATA] (B)(E) [TSN: 3075057810]
   Client > Server: sctp (1) [HB REQ]
   Client > Server: sctp (1) [DATA] (B)(E) [TSN: 3075057810]
   Client > Server: sctp (1) [HB REQ]
   Client > Server: sctp (1) [ABORT]

when processing HB ACK packet in Router it calls sctp_new() to initialize
the new ct with vtag[REPLY] set to HB_ACK packet's vtag.

Later when sending DATA from Client, all the SACKs from Server will get
dropped in Router, as the SACK packet's vtag does not match vtag[REPLY]
in the ct. The worst thing is the vtag in this ct will never get fixed
by the upcoming packets from Server.

This patch fixes it by checking SCTP_CID_SHUTDOWN_ACK before setting
vtag[REPLY] in the ct in sctp_new() as the annotation says. With this
fix, it will leave vtag[REPLY] in ct to 0 in the case above, and the
next HB REQ/ACK from Server is able to fix the vtag as its value is 0
in nf_conntrack_sctp_packet().

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nf_conntrack_proto_sctp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/netfilter/nf_conntrack_proto_sctp.c b/net/netfilter/nf_conntrack_proto_sctp.c
index e7545bcca805..6b2a215b2786 100644
--- a/net/netfilter/nf_conntrack_proto_sctp.c
+++ b/net/netfilter/nf_conntrack_proto_sctp.c
@@ -299,7 +299,7 @@ sctp_new(struct nf_conn *ct, const struct sk_buff *skb,
 			pr_debug("Setting vtag %x for secondary conntrack\n",
 				 sh->vtag);
 			ct->proto.sctp.vtag[IP_CT_DIR_ORIGINAL] = sh->vtag;
-		} else {
+		} else if (sch->type == SCTP_CID_SHUTDOWN_ACK) {
 		/* If it is a shutdown ack OOTB packet, we expect a return
 		   shutdown complete, otherwise an ABORT Sec 8.4 (5) and (8) */
 			pr_debug("Setting vtag %x for new conn OOTB\n",
-- 
2.43.0

[PATCH AUTOSEL 5.4 7/7] nvmet-fc: abort command when there is no binding

[Sasha Levin]

From: Daniel Wagner <dwagner@suse.de>

[ Upstream commit 3146345c2e9c2f661527054e402b0cfad80105a4 ]

When the target port has not active port binding, there is no point in
trying to process the command as it has to fail anyway. Instead adding
checks to all commands abort the command early.

Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/target/fc.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/nvme/target/fc.c b/drivers/nvme/target/fc.c
index f74fc6481731..2dd39299fba0 100644
--- a/drivers/nvme/target/fc.c
+++ b/drivers/nvme/target/fc.c
@@ -796,6 +796,9 @@ nvmet_fc_alloc_target_assoc(struct nvmet_fc_tgtport *tgtport)
 	int idx;
 	bool needrandom = true;
 
+	if (!tgtport->pe)
+		return NULL;
+
 	assoc = kzalloc(sizeof(*assoc), GFP_KERNEL);
 	if (!assoc)
 		return NULL;
@@ -2180,8 +2183,9 @@ nvmet_fc_handle_fcp_rqst(struct nvmet_fc_tgtport *tgtport,
 
 	fod->req.cmd = &fod->cmdiubuf.sqe;
 	fod->req.cqe = &fod->rspiubuf.cqe;
-	if (tgtport->pe)
-		fod->req.port = tgtport->pe->port;
+	if (!tgtport->pe)
+		goto transport_error;
+	fod->req.port = tgtport->pe->port;
 
 	/* clear any response payload */
 	memset(&fod->rspiubuf, 0, sizeof(fod->rspiubuf));
-- 
2.43.0