From: Max Kellermann <max.kellermann@ionos.com>
To: linux-kernel@vger.kernel.org
Cc: Max Kellermann <max.kellermann@ionos.com>
Subject: [PATCH v2 12/35] bvec.h: move declarations to bvec_types.h
Date: Fri, 9 Feb 2024 17:40:04 +0100 [thread overview]
Message-ID: <20240209164027.2582906-13-max.kellermann@ionos.com> (raw)
In-Reply-To: <20240209164027.2582906-1-max.kellermann@ionos.com>
By providing declarations in a lean header, we can reduce header
dependencies.
Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
---
include/linux/blk_types.h | 2 +-
include/linux/bvec.h | 84 +--------------------------------
include/linux/bvec_types.h | 95 ++++++++++++++++++++++++++++++++++++++
include/linux/iov_iter.h | 2 +-
include/linux/skbuff.h | 2 +-
5 files changed, 99 insertions(+), 86 deletions(-)
create mode 100644 include/linux/bvec_types.h
diff --git a/include/linux/blk_types.h b/include/linux/blk_types.h
index 1c07848dea7e..9d2d8a8328a6 100644
--- a/include/linux/blk_types.h
+++ b/include/linux/blk_types.h
@@ -7,7 +7,7 @@
#define __LINUX_BLK_TYPES_H
#include <linux/types.h>
-#include <linux/bvec.h>
+#include <linux/bvec_types.h>
#include <linux/device.h>
#include <linux/ktime.h>
diff --git a/include/linux/bvec.h b/include/linux/bvec.h
index 555aae5448ae..fbb79e6ba953 100644
--- a/include/linux/bvec.h
+++ b/include/linux/bvec.h
@@ -7,6 +7,7 @@
#ifndef __LINUX_BVEC_H
#define __LINUX_BVEC_H
+#include <linux/bvec_types.h>
#include <linux/highmem.h>
#include <linux/bug.h>
#include <linux/errno.h>
@@ -14,26 +15,6 @@
#include <linux/minmax.h>
#include <linux/types.h>
-struct page;
-
-/**
- * struct bio_vec - a contiguous range of physical memory addresses
- * @bv_page: First page associated with the address range.
- * @bv_len: Number of bytes in the address range.
- * @bv_offset: Start of the address range relative to the start of @bv_page.
- *
- * The following holds for a bvec if n * PAGE_SIZE < bv_offset + bv_len:
- *
- * nth_page(@bv_page, n) == @bv_page + n
- *
- * This holds because page_is_mergeable() checks the above property.
- */
-struct bio_vec {
- struct page *bv_page;
- unsigned int bv_len;
- unsigned int bv_offset;
-};
-
/**
* bvec_set_page - initialize a bvec based off a struct page
* @bv: bvec to initialize
@@ -74,69 +55,6 @@ static inline void bvec_set_virt(struct bio_vec *bv, void *vaddr,
bvec_set_page(bv, virt_to_page(vaddr), len, offset_in_page(vaddr));
}
-struct bvec_iter {
- sector_t bi_sector; /* device address in 512 byte
- sectors */
- unsigned int bi_size; /* residual I/O count */
-
- unsigned int bi_idx; /* current index into bvl_vec */
-
- unsigned int bi_bvec_done; /* number of bytes completed in
- current bvec */
-} __packed;
-
-struct bvec_iter_all {
- struct bio_vec bv;
- int idx;
- unsigned done;
-};
-
-/*
- * various member access, note that bio_data should of course not be used
- * on highmem page vectors
- */
-#define __bvec_iter_bvec(bvec, iter) (&(bvec)[(iter).bi_idx])
-
-/* multi-page (mp_bvec) helpers */
-#define mp_bvec_iter_page(bvec, iter) \
- (__bvec_iter_bvec((bvec), (iter))->bv_page)
-
-#define mp_bvec_iter_len(bvec, iter) \
- min((iter).bi_size, \
- __bvec_iter_bvec((bvec), (iter))->bv_len - (iter).bi_bvec_done)
-
-#define mp_bvec_iter_offset(bvec, iter) \
- (__bvec_iter_bvec((bvec), (iter))->bv_offset + (iter).bi_bvec_done)
-
-#define mp_bvec_iter_page_idx(bvec, iter) \
- (mp_bvec_iter_offset((bvec), (iter)) / PAGE_SIZE)
-
-#define mp_bvec_iter_bvec(bvec, iter) \
-((struct bio_vec) { \
- .bv_page = mp_bvec_iter_page((bvec), (iter)), \
- .bv_len = mp_bvec_iter_len((bvec), (iter)), \
- .bv_offset = mp_bvec_iter_offset((bvec), (iter)), \
-})
-
-/* For building single-page bvec in flight */
- #define bvec_iter_offset(bvec, iter) \
- (mp_bvec_iter_offset((bvec), (iter)) % PAGE_SIZE)
-
-#define bvec_iter_len(bvec, iter) \
- min_t(unsigned, mp_bvec_iter_len((bvec), (iter)), \
- PAGE_SIZE - bvec_iter_offset((bvec), (iter)))
-
-#define bvec_iter_page(bvec, iter) \
- (mp_bvec_iter_page((bvec), (iter)) + \
- mp_bvec_iter_page_idx((bvec), (iter)))
-
-#define bvec_iter_bvec(bvec, iter) \
-((struct bio_vec) { \
- .bv_page = bvec_iter_page((bvec), (iter)), \
- .bv_len = bvec_iter_len((bvec), (iter)), \
- .bv_offset = bvec_iter_offset((bvec), (iter)), \
-})
-
static inline bool bvec_iter_advance(const struct bio_vec *bv,
struct bvec_iter *iter, unsigned bytes)
{
diff --git a/include/linux/bvec_types.h b/include/linux/bvec_types.h
new file mode 100644
index 000000000000..23453c988154
--- /dev/null
+++ b/include/linux/bvec_types.h
@@ -0,0 +1,95 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * bvec iterator
+ *
+ * Copyright (C) 2001 Ming Lei <ming.lei@canonical.com>
+ */
+#ifndef __LINUX_BVEC_TYPES_H
+#define __LINUX_BVEC_TYPES_H
+
+#include <linux/types.h>
+
+struct page;
+
+/**
+ * struct bio_vec - a contiguous range of physical memory addresses
+ * @bv_page: First page associated with the address range.
+ * @bv_len: Number of bytes in the address range.
+ * @bv_offset: Start of the address range relative to the start of @bv_page.
+ *
+ * The following holds for a bvec if n * PAGE_SIZE < bv_offset + bv_len:
+ *
+ * nth_page(@bv_page, n) == @bv_page + n
+ *
+ * This holds because page_is_mergeable() checks the above property.
+ */
+struct bio_vec {
+ struct page *bv_page;
+ unsigned int bv_len;
+ unsigned int bv_offset;
+};
+
+struct bvec_iter {
+ sector_t bi_sector; /* device address in 512 byte
+ sectors */
+ unsigned int bi_size; /* residual I/O count */
+
+ unsigned int bi_idx; /* current index into bvl_vec */
+
+ unsigned int bi_bvec_done; /* number of bytes completed in
+ current bvec */
+} __packed;
+
+struct bvec_iter_all {
+ struct bio_vec bv;
+ int idx;
+ unsigned done;
+};
+
+/*
+ * various member access, note that bio_data should of course not be used
+ * on highmem page vectors
+ */
+#define __bvec_iter_bvec(bvec, iter) (&(bvec)[(iter).bi_idx])
+
+/* multi-page (mp_bvec) helpers */
+#define mp_bvec_iter_page(bvec, iter) \
+ (__bvec_iter_bvec((bvec), (iter))->bv_page)
+
+#define mp_bvec_iter_len(bvec, iter) \
+ min((iter).bi_size, \
+ __bvec_iter_bvec((bvec), (iter))->bv_len - (iter).bi_bvec_done)
+
+#define mp_bvec_iter_offset(bvec, iter) \
+ (__bvec_iter_bvec((bvec), (iter))->bv_offset + (iter).bi_bvec_done)
+
+#define mp_bvec_iter_page_idx(bvec, iter) \
+ (mp_bvec_iter_offset((bvec), (iter)) / PAGE_SIZE)
+
+#define mp_bvec_iter_bvec(bvec, iter) \
+((struct bio_vec) { \
+ .bv_page = mp_bvec_iter_page((bvec), (iter)), \
+ .bv_len = mp_bvec_iter_len((bvec), (iter)), \
+ .bv_offset = mp_bvec_iter_offset((bvec), (iter)), \
+})
+
+/* For building single-page bvec in flight */
+ #define bvec_iter_offset(bvec, iter) \
+ (mp_bvec_iter_offset((bvec), (iter)) % PAGE_SIZE)
+
+#define bvec_iter_len(bvec, iter) \
+ min_t(unsigned, mp_bvec_iter_len((bvec), (iter)), \
+ PAGE_SIZE - bvec_iter_offset((bvec), (iter)))
+
+#define bvec_iter_page(bvec, iter) \
+ (mp_bvec_iter_page((bvec), (iter)) + \
+ mp_bvec_iter_page_idx((bvec), (iter)))
+
+#define bvec_iter_bvec(bvec, iter) \
+((struct bio_vec) { \
+ .bv_page = bvec_iter_page((bvec), (iter)), \
+ .bv_len = bvec_iter_len((bvec), (iter)), \
+ .bv_offset = bvec_iter_offset((bvec), (iter)), \
+})
+
+#endif /* __LINUX_BVEC_TYPES_H */
diff --git a/include/linux/iov_iter.h b/include/linux/iov_iter.h
index c3adba9ff389..060626682481 100644
--- a/include/linux/iov_iter.h
+++ b/include/linux/iov_iter.h
@@ -9,7 +9,7 @@
#define _LINUX_IOV_ITER_H
#include <linux/uio.h>
-#include <linux/bvec.h>
+#include <linux/bvec_types.h>
#include <linux/highmem.h> // for kmap_local_page()
typedef size_t (*iov_step_f)(void *iter_base, size_t progress, size_t len,
diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index 2dde34c29203..8ee67e49699b 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -14,7 +14,7 @@
#include <linux/compiler.h>
#include <linux/time.h>
#include <linux/bug.h>
-#include <linux/bvec.h>
+#include <linux/bvec_types.h>
#include <linux/cache.h>
#include <linux/rbtree.h>
#include <linux/socket.h>
--
2.39.2
next prev parent reply other threads:[~2024-02-09 16:40 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-09 16:39 [PATCH v2 00/35] Fast kernel headers: reduce header dependencies Max Kellermann
2024-02-09 16:39 ` [PATCH v2 01/35] include: add missing includes Max Kellermann
2024-02-09 16:39 ` [PATCH v2 02/35] include: remove unnecessary #include directives Max Kellermann
2024-02-10 12:36 ` kernel test robot
2024-02-10 12:58 ` kernel test robot
2024-02-09 16:39 ` [PATCH v2 03/35] include: reduce header dependencies by using "*_types.h" Max Kellermann
2024-02-09 16:39 ` [PATCH v2 04/35] workqueue.h: move struct delayed_work to workqueue_types.h Max Kellermann
2024-02-09 16:39 ` [PATCH v2 05/35] kref.h: move declarations to kref_types.h Max Kellermann
2024-02-09 16:39 ` [PATCH v2 06/35] kobject.h: move declarations to kobject_types.h Max Kellermann
2024-02-09 16:39 ` [PATCH v2 07/35] sysfs.h: move declarations to sysfs_types.h Max Kellermann
2024-02-09 16:40 ` [PATCH v2 08/35] maple_tree.h: move declarations to maple_tree_types.h Max Kellermann
2024-02-09 16:40 ` [PATCH v2 09/35] rwsem.h: move declarations to rwsem_types.h Max Kellermann
2024-02-09 16:40 ` [PATCH v2 10/35] uprobes.h: move declarations to uprobes_types.h Max Kellermann
2024-02-09 16:40 ` [PATCH v2 11/35] percpu_counter.h: move declarations to percpu_counter_types.h Max Kellermann
2024-02-09 16:40 ` Max Kellermann [this message]
2024-02-09 16:40 ` [PATCH v2 13/35] wait.h: move declarations to wait_types.h Max Kellermann
2024-02-09 16:40 ` [PATCH v2 14/35] swait.h: move declarations to swait_types.h Max Kellermann
2024-02-09 16:40 ` [PATCH v2 15/35] completion.h: move declarations to completion_types.h Max Kellermann
2024-02-09 16:40 ` [PATCH v2 16/35] device.h: move declarations to device_types.h Max Kellermann
2024-02-09 16:40 ` [PATCH v2 17/35] xarray.h: move declarations to xarray_types.h Max Kellermann
2024-02-09 16:40 ` [PATCH v2 18/35] blkdev.h: move blk_op_is_passthrough() to blk_types.h Max Kellermann
2024-02-09 16:40 ` [PATCH v2 19/35] bio.h: move bio_has_data() and bio_no_advance_iter() " Max Kellermann
2024-02-09 16:40 ` [PATCH v2 20/35] bio.h: move declarations to bio_types.h Max Kellermann
2024-02-09 16:40 ` [PATCH v2 21/35] percpu-refcount.h: move declarations to percpu-refcount_types.h Max Kellermann
2024-02-09 16:40 ` [PATCH v2 22/35] blkdev.h: move declarations to blkdev_types.h Max Kellermann
2024-02-09 16:40 ` [PATCH v2 23/35] sbitmap.h: move declarations to sbitmap_types.h Max Kellermann
2024-02-09 16:40 ` [PATCH v2 24/35] list_lru.h: move declarations to list_lru_types.h Max Kellermann
2024-02-09 16:40 ` [PATCH v2 25/35] list_bl.h: move declarations to list_bl_types.h Max Kellermann
2024-02-09 16:40 ` [PATCH v2 26/35] percpu-rwsem.h: move declarations to percpu-rwsem_types.h Max Kellermann
2024-02-09 16:40 ` [PATCH v2 27/35] quota.h: move declarations to quota_types.h Max Kellermann
2024-02-09 16:40 ` [PATCH v2 28/35] radix-tree.h: move declarations to radix-tree_types.h Max Kellermann
2024-02-09 16:40 ` [PATCH v2 29/35] linux/random.h: reduce dependencies on linux/kernel.h Max Kellermann
2024-02-09 16:40 ` [PATCH v2 30/35] linux/kernel.h: move might_sleep(), ... to sched/debug_atomic_sleep.h Max Kellermann
2024-02-09 16:40 ` [PATCH v2 31/35] linux/kernel.h: move READ and WRITE to direction.h Max Kellermann
2024-02-09 16:40 ` [PATCH v2 32/35] linux/kernel.h: move VERIFY_OCTAL_PERMISSIONS() to octal_permissions.h Max Kellermann
2024-02-09 16:40 ` [PATCH v2 33/35] linux/kernel.h: move upper/lower_*_bits macros to wordpart.h Max Kellermann
2024-02-09 16:40 ` [PATCH v2 34/35] linux/kernel.h: move PTR_IF() to ptr_util.h Max Kellermann
2024-02-09 16:40 ` [PATCH v2 35/35] include: remove lots of unnecessary <linux/kernel.h> includes Max Kellermann
2024-02-10 12:26 ` kernel test robot
2024-03-25 13:05 ` [PATCH v2 00/35] Fast kernel headers: reduce header dependencies Andy Shevchenko
2024-03-29 13:31 ` Max Kellermann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240209164027.2582906-13-max.kellermann@ionos.com \
--to=max.kellermann@ionos.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox