From: Judith Mendez <jm@ti.com>
To: Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: Nishanth Menon <nm@ti.com>, Vignesh Raghavendra <vigneshr@ti.com>,
Tero Kristo <kristo@kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
Wadim Egorov <w.egorov@phytec.de>,
Francesco Dolcini <francesco.dolcini@toradex.com>
Subject: [PATCH v2 0/9] Fix MMC properties on Sitara devices
Date: Mon, 12 Feb 2024 18:24:07 -0600 [thread overview]
Message-ID: <20240213002416.1560357-1-jm@ti.com> (raw)
This patch series aims to update MMC nodes for TI
K3 Sitara devices.
The series introduces MMC0 and MMC2 nodes and enables
eMMC for AM62ax platform.
Also introduce fixes for MMC ITAP/OTAP values for AM64x
platform according to device datasheet [0], and add ITAP/
OTAP values for AM62p to enable the highest timing possible
for MMC0 and MMC1, according to device datasheet [1].
The DLL properties ti,trm-icp and ti,driver-strength-ohm
should be removed for devices with soft PHYs since drive
strength cannot be changed, so remove these properties when
not applicable. Since this fix touches non-TI boards and
therefore cannot be tested, all tested-by's are welcome.
Also include a few fixes for ti,clkbuf-sel, bus-width,
and bootph-all device tree properties in MMC nodes.
This series was tested on:
- AM62a SK
- AM62x SK
- AM62p SK
- AM64x GP EVM
- AM64x SK EVM
- Beagleplay
[0] https://www.ti.com/lit/ds/symlink/am6442.pdf
[1] https://www.ti.com/lit/ds/symlink/am62p.pdf
Judith Mendez (7):
arm64: dts: ti: k3-am62a-main: Add sdhci2 instance
arm64: dts: ti: k3-am64-main: Fix ITAP/OTAP values for MMC
arm64: dts: ti: k3-am62p: Add ITAP/OTAP values for MMC
arm64: dts: ti: k3-am6*: Remove DLL properties for soft PHYs
arm64: dts: ti: k3-am6*: Fix ti,clkbuf-sel property in MMC nodes
arm64: dts: ti: k3-am6*: Fix bus-width property in MMC nodes
arm64: dts: ti: k3-am6*: Add bootph-all property in MMC node
Nitin Yadav (2):
arm64: dts: ti: k3-am62a-main: Add sdhci0 instance
arm64: dts: ti: k3-am62a7-sk: Enable eMMC support
arch/arm64/boot/dts/ti/k3-am62-main.dtsi | 12 +++--
.../boot/dts/ti/k3-am62-phycore-som.dtsi | 1 -
.../boot/dts/ti/k3-am62-verdin-dahlia.dtsi | 1 -
.../arm64/boot/dts/ti/k3-am62-verdin-dev.dtsi | 1 -
.../boot/dts/ti/k3-am62-verdin-wifi.dtsi | 1 -
arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi | 2 -
.../arm64/boot/dts/ti/k3-am625-beagleplay.dts | 4 --
.../dts/ti/k3-am625-phyboard-lyra-rdk.dts | 1 -
arch/arm64/boot/dts/ti/k3-am62a-main.dtsi | 45 ++++++++++++++++++-
arch/arm64/boot/dts/ti/k3-am62a7-sk.dts | 27 ++++++++++-
arch/arm64/boot/dts/ti/k3-am62p-main.dtsi | 44 ++++++++++++++++--
arch/arm64/boot/dts/ti/k3-am62p5-sk.dts | 3 +-
.../arm64/boot/dts/ti/k3-am62x-sk-common.dtsi | 2 -
arch/arm64/boot/dts/ti/k3-am64-main.dtsi | 15 +++++--
arch/arm64/boot/dts/ti/k3-am642-evm.dts | 4 +-
arch/arm64/boot/dts/ti/k3-am642-sk.dts | 2 -
16 files changed, 129 insertions(+), 36 deletions(-)
base-commit: 1e6bbc5185bcd113c8d2f7aa0a02f588a6bdbe5d
--
2.43.0
next reply other threads:[~2024-02-13 0:24 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-13 0:24 Judith Mendez [this message]
2024-02-13 0:24 ` [PATCH v2 1/9] arm64: dts: ti: k3-am62a-main: Add sdhci0 instance Judith Mendez
2024-02-13 0:24 ` [PATCH v2 2/9] arm64: dts: ti: k3-am62a-main: Add sdhci2 instance Judith Mendez
2024-02-13 0:24 ` [PATCH v2 3/9] arm64: dts: ti: k3-am62a7-sk: Enable eMMC support Judith Mendez
2024-02-13 0:24 ` [PATCH v2 4/9] arm64: dts: ti: k3-am64-main: Fix ITAP/OTAP values for MMC Judith Mendez
2024-02-13 0:24 ` [PATCH v2 5/9] arm64: dts: ti: k3-am62p: Add " Judith Mendez
2024-02-13 0:24 ` [PATCH v2 6/9] arm64: dts: ti: k3-am6*: Remove DLL properties for soft PHYs Judith Mendez
2024-02-13 5:26 ` Wadim Egorov
2024-02-13 15:52 ` Judith Mendez
2024-02-13 16:06 ` Judith Mendez
2024-02-13 8:15 ` Francesco Dolcini
2024-02-13 0:24 ` [PATCH v2 7/9] arm64: dts: ti: k3-am6*: Fix ti,clkbuf-sel property in MMC nodes Judith Mendez
2024-02-13 0:24 ` [PATCH v2 8/9] arm64: dts: ti: k3-am6*: Fix bus-width " Judith Mendez
2024-02-13 5:07 ` Wadim Egorov
2024-02-13 8:19 ` Francesco Dolcini
2024-02-13 9:05 ` Wadim Egorov
2024-02-13 0:24 ` [PATCH v2 9/9] arm64: dts: ti: k3-am6*: Add bootph-all property in MMC node Judith Mendez
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240213002416.1560357-1-jm@ti.com \
--to=jm@ti.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=francesco.dolcini@toradex.com \
--cc=kristo@kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nm@ti.com \
--cc=robh+dt@kernel.org \
--cc=vigneshr@ti.com \
--cc=w.egorov@phytec.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox