[PATCH v1 4/5] serial: 8250_exar: Use 8250 PCI library to map and assign resources

[Andy Shevchenko <andriy.shevchenko@linux.intel.com>]

8250 PCI library provides a common code to map and assign resources.
Use it in order to deduplicate existing code and support IO port
variants.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/tty/serial/8250/8250_exar.c | 10 +++++-----
 drivers/tty/serial/8250/Kconfig     |  1 +
 2 files changed, 6 insertions(+), 5 deletions(-)

diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c
index fa750c586b1f..3913b8a99161 100644
--- a/drivers/tty/serial/8250/8250_exar.c
+++ b/drivers/tty/serial/8250/8250_exar.c
@@ -24,6 +24,7 @@
 #include <asm/byteorder.h>
 
 #include "8250.h"
+#include "8250_pcilib.h"
 
 #define PCI_DEVICE_ID_ACCESSIO_COM_2S		0x1052
 #define PCI_DEVICE_ID_ACCESSIO_COM_4S		0x105d
@@ -230,13 +231,12 @@ static int default_setup(struct exar8250 *priv, struct pci_dev *pcidev,
 			 struct uart_8250_port *port)
 {
 	const struct exar8250_board *board = priv->board;
-	unsigned int bar = 0;
 	unsigned char status;
+	int err;
 
-	port->port.iotype = UPIO_MEM;
-	port->port.mapbase = pci_resource_start(pcidev, bar) + offset;
-	port->port.membase = priv->virt + offset;
-	port->port.regshift = board->reg_shift;
+	err = serial8250_pci_setup_port(pcidev, port, 0, offset, board->reg_shift);
+	if (err)
+		return err;
 
 	/*
 	 * XR17V35x UARTs have an extra divisor register, DLD that gets enabled
diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
index a5eb2657f279..52d8589f1dbe 100644
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
@@ -149,6 +149,7 @@ config SERIAL_8250_PCI
 config SERIAL_8250_EXAR
 	tristate "8250/16550 Exar/Commtech PCI/PCIe device support"
 	depends on SERIAL_8250 && PCI
+	select SERIAL_8250_PCILIB
 	default SERIAL_8250
 	help
 	  This builds support for XR17C1xx, XR17V3xx and some Commtech
-- 
2.43.0.rc1.1.gbec44491f096