[PATCH net-next 2/3] net: bcmgenet: Pass "main" clock down to the MDIO driver

[Florian Fainelli <florian.fainelli@broadcom.com>]

GENET has historically had to create a MDIO platform device for its
controller and pass some auxiliary data to it, like a MDIO completion
callback. Now we also pass the "main" clock to allow for the MDIO bus
controller to manage that clock adequately around I/O accesses.

Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
---
 drivers/net/ethernet/broadcom/genet/bcmmii.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/ethernet/broadcom/genet/bcmmii.c b/drivers/net/ethernet/broadcom/genet/bcmmii.c
index cbbe004621bc..7a21950da77c 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmmii.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmmii.c
@@ -476,6 +476,10 @@ static int bcmgenet_mii_register(struct bcmgenet_priv *priv)
 	ppd.wait_func = bcmgenet_mii_wait;
 	ppd.wait_func_data = priv;
 	ppd.bus_name = "bcmgenet MII bus";
+	/* Pass a reference to our "main" clock which is used for MDIO
+	 * transfers
+	 */
+	ppd.clk = priv->clk;
 
 	/* Unimac MDIO bus controller starts at UniMAC offset + MDIO_CMD
 	 * and is 2 * 32-bits word long, 8 bytes total.
-- 
2.34.1