From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: "Ondřej Jirman" <megi@xff.cz>,
linux-usb@vger.kernel.org, "Guenter Roeck" <linux@roeck-us.net>,
"Heikki Krogerus" <heikki.krogerus@linux.intel.com>,
"open list" <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] Revert "usb: typec: tcpm: reset counter when enter into unattached state after try role"
Date: Sat, 17 Feb 2024 17:03:57 +0100 [thread overview]
Message-ID: <2024021724-festivity-divisible-0b32@gregkh> (raw)
In-Reply-To: <ratkc4fo3mqwuzsbxsiwq54jclnarnjl3x7ts64elx6hguvbay@ihelujsnzd6i>
On Sat, Feb 17, 2024 at 04:40:21PM +0100, Ondřej Jirman wrote:
> On Sat, Feb 17, 2024 at 04:32:54PM +0100, Greg Kroah-Hartman wrote:
> > On Thu, Feb 15, 2024 at 08:33:50PM +0100, Ondřej Jirman wrote:
> > > From: Ondrej Jirman <megi@xff.cz>
> > >
> > > The reverted commit makes the state machine only ever go from SRC_ATTACH_WAIT
> > > to SNK_TRY in endless loop when toggling. After revert it goes to SRC_ATTACHED
> > > after initially trying SNK_TRY earlier, as it should for toggling to ever detect
> > > the power source mode and the port is again able to provide power to attached
> > > power sinks.
> > >
> > > This reverts commit 2d6d80127006ae3da26b1f21a65eccf957f2d1e5.
> > > ---
> > > drivers/usb/typec/tcpm/tcpm.c | 3 ---
> > > 1 file changed, 3 deletions(-)
> > >
> > > See https://lore.kernel.org/all/odggrbbgjpardze76qiv57mw6tllisyu5sbrta37iadjzwamcv@qr3ubwnlzqqt/
> > > for more.
> > >
> > > diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c
> > > index f7d7daa60c8d..295ae7eb912c 100644
> > > --- a/drivers/usb/typec/tcpm/tcpm.c
> > > +++ b/drivers/usb/typec/tcpm/tcpm.c
> > > @@ -3743,9 +3743,6 @@ static void tcpm_detach(struct tcpm_port *port)
> > > if (tcpm_port_is_disconnected(port))
> > > port->hard_reset_count = 0;
> > >
> > > - port->try_src_count = 0;
> > > - port->try_snk_count = 0;
> > > -
> > > if (!port->attached)
> > > return;
> > >
> > > --
> > > 2.43.0
> > >
> > >
> >
> > Hi,
> >
> > This is the friendly patch-bot of Greg Kroah-Hartman. You have sent him
> > a patch that has triggered this response. He used to manually respond
> > to these common problems, but in order to save his sanity (he kept
> > writing the same thing over and over, yet to different people), I was
> > created. Hopefully you will not take offence and will fix the problem
> > in your patch and resubmit it so that it can be accepted into the Linux
> > kernel tree.
> >
> > You are receiving this message because of the following common error(s)
> > as indicated below:
> >
> > - Your patch does not have a Signed-off-by: line. Please read the
> > kernel file, Documentation/process/submitting-patches.rst and resend
> > it after adding that line. Note, the line needs to be in the body of
> > the email, before the patch, not at the bottom of the patch or in the
> > email signature.
> >
> >
> > If you wish to discuss this problem further, or you have questions about
> > how to resolve this issue, please feel free to respond to this email and
> > Greg will reply once he has dug out from the pending patches received
> > from other developers.
>
> It's a mechanically generated revert of upstream patch. It has no authorship.
> I did not write it, machine did. :)
>
> But I can add a sign off for the commit message I made:
>
> Signed-of-by: Ondrej Jirman <megi@xff.cz>
You have to do so.
And you need a Fixes: and cc: stable tag too, right?
Please fix up and send a v2 properly.
thanks,
greg k-h
next prev parent reply other threads:[~2024-02-17 16:03 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-15 19:33 [PATCH] Revert "usb: typec: tcpm: reset counter when enter into unattached state after try role" Ondřej Jirman
2024-02-17 15:32 ` Greg Kroah-Hartman
2024-02-17 15:40 ` Ondřej Jirman
2024-02-17 16:03 ` Greg Kroah-Hartman [this message]
2024-02-17 16:14 ` Guenter Roeck
-- strict thread matches above, loose matches on Subject: below --
2024-02-17 16:20 Ondřej Jirman
2024-02-26 7:48 ` Heikki Krogerus
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2024021724-festivity-divisible-0b32@gregkh \
--to=gregkh@linuxfoundation.org \
--cc=heikki.krogerus@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=megi@xff.cz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox