public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Dumitru Ceclan <mitrutzceclan@gmail.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>,
	Jonathan Cameron <jic23@kernel.org>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>,
	linux-iio@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	Ceclan Dumitru <dumitru.ceclan@analog.com>,
	Dumitru Ceclan <mitrutzceclan@gmail.com>
Subject: [PATCH v5 5/5] iio: amplifiers: hmc425a: add support for LTC6373 Instrumentation Amplifier
Date: Tue, 20 Feb 2024 17:34:53 +0200	[thread overview]
Message-ID: <20240220153553.2432-6-mitrutzceclan@gmail.com> (raw)
In-Reply-To: <20240220153553.2432-1-mitrutzceclan@gmail.com>

This adds support for LTC6373 36 V Fully-Differential Programmable-Gain
Instrumentation Amplifier with 25 pA Input Bias Current.
The user can program the gain to one of seven available settings through
a 3-bit parallel interface (A2 to A0).

Signed-off-by: Dumitru Ceclan <mitrutzceclan@gmail.com>
---
 drivers/iio/amplifiers/hmc425a.c | 124 ++++++++++++++++++++++++++++++-
 1 file changed, 120 insertions(+), 4 deletions(-)

diff --git a/drivers/iio/amplifiers/hmc425a.c b/drivers/iio/amplifiers/hmc425a.c
index 77872e2dfdfe..50c86c2d28d7 100644
--- a/drivers/iio/amplifiers/hmc425a.c
+++ b/drivers/iio/amplifiers/hmc425a.c
@@ -2,9 +2,10 @@
 /*
  * HMC425A and similar Gain Amplifiers
  *
- * Copyright 2020 Analog Devices Inc.
+ * Copyright 2020, 2024 Analog Devices Inc.
  */
 
+#include <linux/bits.h>
 #include <linux/bitops.h>
 #include <linux/device.h>
 #include <linux/err.h>
@@ -12,6 +13,7 @@
 #include <linux/iio/iio.h>
 #include <linux/iio/sysfs.h>
 #include <linux/kernel.h>
+#include <linux/math.h>
 #include <linux/mod_devicetable.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
@@ -20,10 +22,24 @@
 #include <linux/regulator/consumer.h>
 #include <linux/sysfs.h>
 
+/*
+ * The LTC6373 amplifier supports configuring gain using GPIO's with the following
+ *  values (OUTPUT_V / INPUT_V): 0(shutdown), 0.25, 0.5, 1, 2, 4, 8, 16
+ *
+ * Except for the shutdown value, all can be converted to dB using 20 * log10(x)
+ * From here, it is observed that all values are multiples of the '2' gain setting,
+ *  with the correspondent of 6.020dB.
+ */
+#define LTC6373_CONVERSION_CONSTANT	6020
+#define LTC6373_MIN_GAIN_CODE		0x6
+#define LTC6373_CONVERSION_MASK		GENMASK(2, 0)
+#define LTC6373_SHUTDOWN		GENMASK(2, 0)
+
 enum hmc425a_type {
 	ID_HMC425A,
 	ID_HMC540S,
-	ID_ADRF5740
+	ID_ADRF5740,
+	ID_LTC6373,
 };
 
 struct hmc425a_chip_info {
@@ -34,6 +50,8 @@ struct hmc425a_chip_info {
 	int				gain_min;
 	int				gain_max;
 	int				default_gain;
+	int				powerdown_val;
+	bool				has_powerdown;
 
 	int				(*gain_dB_to_code)(int gain, int *code);
 	int				(*code_to_gain_dB)(int code, int *val, int *val2);
@@ -44,6 +62,7 @@ struct hmc425a_state {
 	const struct	hmc425a_chip_info *chip_info;
 	struct	gpio_descs *gpios;
 	u32	gain;
+	bool	powerdown;
 };
 
 static int gain_dB_to_code(struct hmc425a_state *st, int val, int val2, int *code)
@@ -58,6 +77,8 @@ static int gain_dB_to_code(struct hmc425a_state *st, int val, int val2, int *cod
 
 	if (gain > inf->gain_max || gain < inf->gain_min)
 		return -EINVAL;
+	if (st->powerdown)
+		return -EPERM;
 
 	return st->chip_info->gain_dB_to_code(gain, code);
 }
@@ -83,8 +104,17 @@ static int adrf5740_gain_dB_to_code(int gain, int *code)
 	return 0;
 }
 
+static int ltc6373_gain_dB_to_code(int gain, int *code)
+{
+	*code = ~(DIV_ROUND_CLOSEST(gain, LTC6373_CONVERSION_CONSTANT) + 3)
+		& LTC6373_CONVERSION_MASK;
+	return 0;
+}
+
 static int code_to_gain_dB(struct hmc425a_state *st, int *val, int *val2)
 {
+	if (st->powerdown)
+		return -EPERM;
 	return st->chip_info->code_to_gain_dB(st->gain, val, val2);
 }
 
@@ -114,6 +144,16 @@ static int adrf5740_code_to_gain_dB(int code, int *val, int *val2)
 	return 0;
 }
 
+static int ltc6373_code_to_gain_dB(int code, int *val, int *val2)
+{
+	int gain = ((~code & LTC6373_CONVERSION_MASK) - 3) *
+		   LTC6373_CONVERSION_CONSTANT;
+
+	*val = gain / 1000;
+	*val2 = (gain % 1000) * 1000;
+	return 0;
+}
+
 static int hmc425a_write(struct iio_dev *indio_dev, u32 value)
 {
 	struct hmc425a_state *st = iio_priv(indio_dev);
@@ -191,6 +231,48 @@ static const struct iio_info hmc425a_info = {
 	.write_raw_get_fmt = &hmc425a_write_raw_get_fmt,
 };
 
+static ssize_t ltc6373_read_powerdown(struct iio_dev *indio_dev,
+				      uintptr_t private,
+				      const struct iio_chan_spec *chan,
+				      char *buf)
+{
+	struct hmc425a_state *st = iio_priv(indio_dev);
+
+	return sysfs_emit(buf, "%d\n", st->powerdown);
+}
+
+static ssize_t ltc6373_write_powerdown(struct iio_dev *indio_dev,
+				       uintptr_t private,
+				       const struct iio_chan_spec *chan,
+				       const char *buf,
+				       size_t len)
+{
+	struct hmc425a_state *st = iio_priv(indio_dev);
+	bool powerdown;
+	int code, ret;
+
+	ret = kstrtobool(buf, &powerdown);
+	if (ret)
+		return ret;
+
+	mutex_lock(&st->lock);
+	st->powerdown = powerdown;
+	code = (powerdown) ? LTC6373_SHUTDOWN : st->gain;
+	hmc425a_write(indio_dev, code);
+	mutex_unlock(&st->lock);
+	return len;
+}
+
+static const struct iio_chan_spec_ext_info ltc6373_ext_info[] = {
+	{
+		.name = "powerdown",
+		.read = ltc6373_read_powerdown,
+		.write = ltc6373_write_powerdown,
+		.shared = IIO_SEPARATE,
+	},
+	{}
+};
+
 #define HMC425A_CHAN(_channel)						\
 {									\
 	.type = IIO_VOLTAGE,						\
@@ -200,10 +282,24 @@ static const struct iio_info hmc425a_info = {
 	.info_mask_separate = BIT(IIO_CHAN_INFO_HARDWAREGAIN),		\
 }
 
+#define LTC6373_CHAN(_channel)						\
+{									\
+	.type = IIO_VOLTAGE,						\
+	.output = 1,							\
+	.indexed = 1,							\
+	.channel = _channel,						\
+	.info_mask_separate = BIT(IIO_CHAN_INFO_HARDWAREGAIN),		\
+	.ext_info = ltc6373_ext_info,					\
+}
+
 static const struct iio_chan_spec hmc425a_channels[] = {
 	HMC425A_CHAN(0),
 };
 
+static const struct iio_chan_spec ltc6373_channels[] = {
+	LTC6373_CHAN(0),
+};
+
 static struct hmc425a_chip_info hmc425a_chip_info_tbl[] = {
 	[ID_HMC425A] = {
 		.name = "hmc425a",
@@ -238,6 +334,19 @@ static struct hmc425a_chip_info hmc425a_chip_info_tbl[] = {
 		.gain_dB_to_code = adrf5740_gain_dB_to_code,
 		.code_to_gain_dB = adrf5740_code_to_gain_dB,
 	},
+	[ID_LTC6373] = {
+		.name = "ltc6373",
+		.channels = ltc6373_channels,
+		.num_channels = ARRAY_SIZE(ltc6373_channels),
+		.num_gpios = 3,
+		.gain_min = -12041, /* gain setting x0.25*/
+		.gain_max = 24082,  /* gain setting x16  */
+		.default_gain = LTC6373_MIN_GAIN_CODE,
+		.powerdown_val = LTC6373_SHUTDOWN,
+		.has_powerdown = true,
+		.gain_dB_to_code = ltc6373_gain_dB_to_code,
+		.code_to_gain_dB = ltc6373_code_to_gain_dB,
+	},
 };
 
 static int hmc425a_probe(struct platform_device *pdev)
@@ -278,8 +387,13 @@ static int hmc425a_probe(struct platform_device *pdev)
 	indio_dev->info = &hmc425a_info;
 	indio_dev->modes = INDIO_DIRECT_MODE;
 
-	/* Set default gain */
-	hmc425a_write(indio_dev, st->gain);
+	if (st->chip_info->has_powerdown) {
+		st->powerdown = true;
+		hmc425a_write(indio_dev, st->chip_info->powerdown_val);
+	} else {
+		/* Set default gain */
+		hmc425a_write(indio_dev, st->gain);
+	}
 
 	return devm_iio_device_register(&pdev->dev, indio_dev);
 }
@@ -292,6 +406,8 @@ static const struct of_device_id hmc425a_of_match[] = {
 	  .data = &hmc425a_chip_info_tbl[ID_HMC540S]},
 	{ .compatible = "adi,adrf5740",
 	  .data = &hmc425a_chip_info_tbl[ID_ADRF5740]},
+	{ .compatible = "adi,ltc6373",
+	  .data = &hmc425a_chip_info_tbl[ID_LTC6373]},
 	{}
 };
 MODULE_DEVICE_TABLE(of, hmc425a_of_match);
-- 
2.42.0


  parent reply	other threads:[~2024-02-20 15:36 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-02-20 15:34 [PATCH v5 0/5] Add support for LTC6373 Dumitru Ceclan
2024-02-20 15:34 ` [PATCH v5 3/5] iio: amplifiers: hmc425a: move conversion logic Dumitru Ceclan
2024-02-21 13:12   ` Nuno Sá
2024-02-24 17:42   ` Jonathan Cameron
2024-02-20 15:34 ` [PATCH v5 1/5] dt-bindings: iio: hmc425a: add conditional GPIO array size constraints Dumitru Ceclan
2024-02-20 15:34 ` [PATCH v5 4/5] iio: amplifiers: hmc425a: use pointers in match table Dumitru Ceclan
2024-02-21 13:17   ` Nuno Sá
2024-02-24 17:44     ` Jonathan Cameron
2024-02-20 15:34 ` [PATCH v5 2/5] dt-bindings: iio: hmc425a: add entry for LTC6373 Dumitru Ceclan
2024-02-20 15:34 ` Dumitru Ceclan [this message]
2024-02-21 13:23   ` [PATCH v5 5/5] iio: amplifiers: hmc425a: add support for LTC6373 Instrumentation Amplifier Nuno Sá
2024-02-24 17:54     ` Jonathan Cameron
2024-02-26  8:25       ` Nuno Sá

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240220153553.2432-6-mitrutzceclan@gmail.com \
    --to=mitrutzceclan@gmail.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dumitru.ceclan@analog.com \
    --cc=jic23@kernel.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=lars@metafoo.de \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox