[PATCH v2] iio: pressure: dlhl60d: Initialize empty DLH bytes

[Kees Cook <keescook@chromium.org>]

3 bytes were being read but 4 were being written. Explicitly initialize
the unused bytes to 0 and refactor the loop to use direct array
indexing, which appears to silence a Clang false positive warning[1].

Link: https://github.com/ClangBuiltLinux/linux/issues/2000 [1]
Fixes: ac78c6aa4a5d ("iio: pressure: Add driver for DLH pressure sensors")
Signed-off-by: Kees Cook <keescook@chromium.org>
---
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: "Lars-Peter Clausen" <lars@metafoo.de>
Cc: "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>
Cc: "Andy Shevchenko" <andriy.shevchenko@linux.intel.com>
Cc: "Nuno Sá" <nuno.sa@analog.com>
Cc: linux-iio@vger.kernel.org
Cc: "Nathan Chancellor" <nathan@kernel.org>
Cc: "Nick Desaulniers" <ndesaulniers@google.com>
Cc: "Bill Wendling" <morbo@google.com>
Cc: "Justin Stitt" <justinstitt@google.com>
Cc: llvm@lists.linux.dev
 v2: drop comments, array expansion, and WARN. refactor loop.
 v1: https://lore.kernel.org/linux-hardening/20240222222335.work.759-kees@kernel.org/
---
 drivers/iio/pressure/dlhl60d.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/iio/pressure/dlhl60d.c b/drivers/iio/pressure/dlhl60d.c
index 28c8269ba65d..0bba4c5a8d40 100644
--- a/drivers/iio/pressure/dlhl60d.c
+++ b/drivers/iio/pressure/dlhl60d.c
@@ -250,18 +250,17 @@ static irqreturn_t dlh_trigger_handler(int irq, void *private)
 	struct dlh_state *st = iio_priv(indio_dev);
 	int ret;
 	unsigned int chn, i = 0;
-	__be32 tmp_buf[2];
+	__be32 tmp_buf[2] = { };
 
 	ret = dlh_start_capture_and_read(st);
 	if (ret)
 		goto out;
 
 	for_each_set_bit(chn, indio_dev->active_scan_mask,
-		indio_dev->masklength) {
-		memcpy(tmp_buf + i,
+			 indio_dev->masklength) {
+		memcpy(&tmp_buf[i++],
 			&st->rx_buf[1] + chn * DLH_NUM_DATA_BYTES,
 			DLH_NUM_DATA_BYTES);
-		i++;
 	}
 
 	iio_push_to_buffers(indio_dev, tmp_buf);
-- 
2.34.1