From: Stefan Berger <stefanb@linux.ibm.com>
To: keyrings@vger.kernel.org, linux-crypto@vger.kernel.org,
herbert@gondor.apana.org.au, davem@davemloft.net
Cc: linux-kernel@vger.kernel.org, saulo.alessandre@tse.jus.br,
Stefan Berger <stefanb@linux.ibm.com>
Subject: [PATCH v3 01/10] crypto: ecdsa - Convert byte arrays with key coordinates to digits
Date: Fri, 23 Feb 2024 15:41:40 -0500 [thread overview]
Message-ID: <20240223204149.4055630-2-stefanb@linux.ibm.com> (raw)
In-Reply-To: <20240223204149.4055630-1-stefanb@linux.ibm.com>
For NIST P192/256/384 the public key's x and y parameters could be copied
directly from a given array since both parameters filled 'ndigits' of
digits (a 'digit' is a u64). For support of NIST P521 the key parameters
first have to be copied into a temporary byte array with leading zeros
and can then be copied into the final digit array using ecc_swap_digits.
Implement ecc_digits_from_bytes to convert a byte array into an array of
digits and use this function in ecdsa_set_pub_key where an input byte array
needs to be converted into digits.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
---
crypto/ecdsa.c | 14 +++++++++-----
include/crypto/internal/ecc.h | 19 +++++++++++++++++++
2 files changed, 28 insertions(+), 5 deletions(-)
diff --git a/crypto/ecdsa.c b/crypto/ecdsa.c
index fbd76498aba8..ba8fb76fd165 100644
--- a/crypto/ecdsa.c
+++ b/crypto/ecdsa.c
@@ -222,9 +222,8 @@ static int ecdsa_ecc_ctx_reset(struct ecc_ctx *ctx)
static int ecdsa_set_pub_key(struct crypto_akcipher *tfm, const void *key, unsigned int keylen)
{
struct ecc_ctx *ctx = akcipher_tfm_ctx(tfm);
+ unsigned int digitlen, ndigits;
const unsigned char *d = key;
- const u64 *digits = (const u64 *)&d[1];
- unsigned int ndigits;
int ret;
ret = ecdsa_ecc_ctx_reset(ctx);
@@ -238,12 +237,17 @@ static int ecdsa_set_pub_key(struct crypto_akcipher *tfm, const void *key, unsig
return -EINVAL;
keylen--;
- ndigits = (keylen >> 1) / sizeof(u64);
+ digitlen = keylen >> 1;
+
+ ndigits = digitlen / sizeof(u64);
if (ndigits != ctx->curve->g.ndigits)
return -EINVAL;
- ecc_swap_digits(digits, ctx->pub_key.x, ndigits);
- ecc_swap_digits(&digits[ndigits], ctx->pub_key.y, ndigits);
+ d++;
+
+ ecc_digits_from_bytes(d, digitlen, ctx->pub_key.x, ndigits);
+ ecc_digits_from_bytes(&d[digitlen], digitlen, ctx->pub_key.y, ndigits);
+
ret = ecc_is_pubkey_valid_full(ctx->curve, &ctx->pub_key);
ctx->pub_key_set = ret == 0;
diff --git a/include/crypto/internal/ecc.h b/include/crypto/internal/ecc.h
index 4f6c1a68882f..bee3329af7de 100644
--- a/include/crypto/internal/ecc.h
+++ b/include/crypto/internal/ecc.h
@@ -56,6 +56,25 @@ static inline void ecc_swap_digits(const void *in, u64 *out, unsigned int ndigit
out[i] = get_unaligned_be64(&src[ndigits - 1 - i]);
}
+/**
+ * ecc_digits_from_bytes() - Create ndigits-sized digits array from byte array
+ * @in: Input byte array
+ * @nbytes Size of input byte array
+ * @out Output digits array
+ * @ndigits: Number of digits to create from byte array
+ */
+static inline void ecc_digits_from_bytes(const u8 *in, unsigned int nbytes,
+ u64 *out, unsigned int ndigits)
+{
+ unsigned int sz = ndigits << ECC_DIGITS_TO_BYTES_SHIFT;
+ u8 tmp[ECC_MAX_DIGITS << ECC_DIGITS_TO_BYTES_SHIFT];
+ unsigned int o = sz - nbytes;
+
+ memset(tmp, 0, o);
+ memcpy(&tmp[o], in, nbytes);
+ ecc_swap_digits(tmp, out, ndigits);
+}
+
/**
* ecc_is_key_valid() - Validate a given ECDH private key
*
--
2.43.0
next prev parent reply other threads:[~2024-02-23 20:42 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-23 20:41 [PATCH v3 00/10] Add support for NIST P521 to ecdsa Stefan Berger
2024-02-23 20:41 ` Stefan Berger [this message]
2024-02-29 9:11 ` [PATCH v3 01/10] crypto: ecdsa - Convert byte arrays with key coordinates to digits Lukas Wunner
2024-02-29 14:57 ` Stefan Berger
2024-02-29 16:48 ` Lukas Wunner
2024-02-29 17:20 ` Stefan Berger
2024-03-01 20:26 ` Jarkko Sakkinen
2024-03-01 20:48 ` Stefan Berger
2024-03-01 20:51 ` Jarkko Sakkinen
2024-03-02 14:00 ` Lukas Wunner
2024-03-02 21:19 ` Stefan Berger
2024-03-02 21:36 ` Lukas Wunner
2024-03-02 21:55 ` Jarkko Sakkinen
2024-02-23 20:41 ` [PATCH v3 02/10] crypto: ecdsa - Adjust tests on length of key parameters Stefan Berger
2024-02-29 9:16 ` Lukas Wunner
2024-02-29 20:28 ` Stefan Berger
2024-02-23 20:41 ` [PATCH v3 03/10] crypto: ecdsa - Extend res.x mod n calculation for NIST P521 Stefan Berger
2024-02-23 20:41 ` [PATCH v3 04/10] crypto: ecc - Implement vli_mmod_fast_521 for NIST p521 Stefan Berger
2024-02-23 20:41 ` [PATCH v3 05/10] crypto: ecc - Add nbits field to ecc_curve structure Stefan Berger
2024-02-23 20:41 ` [PATCH v3 06/10] crypte: ecc - Implement ecc_curve_get_nbits to get number of bits Stefan Berger
2024-02-27 20:15 ` Lukas Wunner
2024-02-29 20:29 ` Stefan Berger
2024-02-23 20:41 ` [PATCH v3 07/10] crypto: ecc - Use ecc_get_curve_nbits to get number of bits for NIST P521 Stefan Berger
2024-02-23 20:41 ` [PATCH v3 08/10] crypto: ecc - Add NIST P521 curve parameters Stefan Berger
2024-02-23 20:41 ` [PATCH v3 09/10] crypto: ecdsa - Register NIST P521 and extend test suite Stefan Berger
2024-02-23 20:41 ` [PATCH v3 10/10] x509: Add OID for NIST P521 and extend parser for it Stefan Berger
2024-02-29 9:34 ` [PATCH v3 00/10] Add support for NIST P521 to ecdsa Lukas Wunner
2024-02-29 18:45 ` Stefan Berger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240223204149.4055630-2-stefanb@linux.ibm.com \
--to=stefanb@linux.ibm.com \
--cc=davem@davemloft.net \
--cc=herbert@gondor.apana.org.au \
--cc=keyrings@vger.kernel.org \
--cc=linux-crypto@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=saulo.alessandre@tse.jus.br \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox