From: Eddie James <eajames@linux.ibm.com>
To: linux-fsi@lists.ozlabs.org
Cc: linux-kernel@vger.kernel.org, linux-i2c@vger.kernel.org,
devicetree@vger.kernel.org, andi.shyti@kernel.org,
eajames@linux.ibm.com, alistair@popple.id.au, joel@jms.id.au,
jk@ozlabs.org, robh@kernel.org,
krzysztof.kozlowski+dt@linaro.org, conor+dt@kernel.org,
lakshmiy@us.ibmcom
Subject: [PATCH v2 30/31] i2c: fsi: Add boolean for skip stop command on abort
Date: Mon, 26 Feb 2024 10:53:20 -0600 [thread overview]
Message-ID: <20240226165321.91976-31-eajames@linux.ibm.com> (raw)
In-Reply-To: <20240226165321.91976-1-eajames@linux.ibm.com>
In preparation for interrupt support, store whether to skip the
final stop command during the abort procedure instead of checking
the previously read status register in the abort function.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
---
drivers/i2c/busses/i2c-fsi.c | 18 +++++++++++-------
1 file changed, 11 insertions(+), 7 deletions(-)
diff --git a/drivers/i2c/busses/i2c-fsi.c b/drivers/i2c/busses/i2c-fsi.c
index 5f524fb6f0f8..33f4e64cb60b 100644
--- a/drivers/i2c/busses/i2c-fsi.c
+++ b/drivers/i2c/busses/i2c-fsi.c
@@ -116,6 +116,9 @@
#define I2C_STAT_ANY_RESP (I2C_STAT_ERR | \
I2C_STAT_DAT_REQ | \
I2C_STAT_CMD_COMP)
+#define I2C_STAT_SKIP_STOP (I2C_STAT_PARITY | \
+ I2C_STAT_LOST_ARB | \
+ I2C_STAT_STOP_ERR)
/* extended status register */
#define I2C_ESTAT_FIFO_SZ GENMASK(31, 24)
@@ -150,6 +153,7 @@ struct fsi_i2c_master {
struct mutex lock;
u32 clock_div;
u8 fifo_size;
+ bool skip_stop;
};
struct fsi_i2c_port {
@@ -459,31 +463,30 @@ static int fsi_i2c_reset_engine(struct fsi_i2c_master *i2c, u16 port)
return 0;
}
-static int fsi_i2c_abort(struct fsi_i2c_port *port, u32 status)
+static int fsi_i2c_abort(struct fsi_i2c_port *port)
{
struct fsi_i2c_master *i2c = port->master;
u32 cmd = I2C_CMD_WITH_STOP;
unsigned long start;
- u32 stat;
+ u32 status;
int rc;
rc = fsi_i2c_reset_engine(i2c, port->port);
if (rc)
return rc;
- rc = fsi_i2c_read_reg(i2c->fsi, I2C_FSI_STAT, &stat);
+ rc = fsi_i2c_read_reg(i2c->fsi, I2C_FSI_STAT, &status);
if (rc)
return rc;
/* if sda is low, peform full bus reset */
- if (!(stat & I2C_STAT_SDA_IN)) {
+ if (!(status & I2C_STAT_SDA_IN)) {
rc = fsi_i2c_reset_bus(i2c, port);
if (rc)
return rc;
}
- /* skip final stop command for these errors */
- if (status & (I2C_STAT_PARITY | I2C_STAT_LOST_ARB | I2C_STAT_STOP_ERR))
+ if (i2c->skip_stop)
return 0;
/* write stop command */
@@ -534,7 +537,8 @@ static int fsi_i2c_handle_status(struct fsi_i2c_port *port,
int rc;
if (status & I2C_STAT_ERR) {
- rc = fsi_i2c_abort(port, status);
+ port->master->skip_stop = status & I2C_STAT_SKIP_STOP;
+ rc = fsi_i2c_abort(port);
if (rc)
return rc;
--
2.39.3
next prev parent reply other threads:[~2024-02-26 16:54 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-26 16:52 [PATCH v2 00/31] fsi: Interrupt support Eddie James
2024-02-26 16:52 ` [PATCH v2 01/31] fsi: Move slave definitions to fsi-slave.h Eddie James
2024-02-26 16:52 ` [PATCH v2 02/31] fsi: Improve master indexing Eddie James
2024-02-26 16:52 ` [PATCH v2 03/31] fsi: Use a defined value for default echo delay Eddie James
2024-02-26 16:52 ` [PATCH v2 04/31] fsi: Expose master-specific local bus clock divider Eddie James
2024-02-26 16:52 ` [PATCH v2 05/31] ARM: dts: aspeed: p10 and tacoma: Set FSI clock frequency Eddie James
2024-02-26 16:52 ` [PATCH v2 06/31] fsi: core: Improve master read/write/error traces Eddie James
2024-02-26 16:52 ` [PATCH v2 07/31] fsi: core: Add slave error trace Eddie James
2024-02-26 16:52 ` [PATCH v2 08/31] dt-bindings: fsi: Add AST2700 compatible Eddie James
2024-02-27 7:14 ` Krzysztof Kozlowski
2024-02-28 15:47 ` Rob Herring
2024-02-26 16:52 ` [PATCH v2 09/31] fsi: aspeed: Add AST2700 support Eddie James
2024-02-26 16:53 ` [PATCH v2 10/31] fsi: core: Add slave spinlock Eddie James
2024-02-26 16:53 ` [PATCH v2 11/31] fsi: core: Allow cfam device type aliases Eddie James
2024-02-26 16:53 ` [PATCH v2 12/31] fsi: core: Add common regmap master functions Eddie James
2024-02-26 16:53 ` [PATCH v2 13/31] fsi: hub: Use common initialization and link enable Eddie James
2024-02-26 16:53 ` [PATCH v2 14/31] fsi: aspeed: " Eddie James
2024-02-26 16:53 ` [PATCH v2 15/31] fsi: aspeed: Remove cfam reset sysfs file in error path and remove Eddie James
2024-02-26 16:53 ` [PATCH v2 16/31] fsi: aspeed: Refactor trace functions Eddie James
2024-02-26 16:53 ` [PATCH v2 17/31] fsi: aspeed: Don't clear all IRQs during OPB transfers Eddie James
2024-02-26 16:53 ` [PATCH v2 18/31] fsi: aspeed: Only read result register for successful read Eddie James
2024-02-26 16:53 ` [PATCH v2 19/31] fsi: aspeed: Switch to spinlock Eddie James
2024-02-26 16:53 ` [PATCH v2 20/31] fsi: aspeed: Disable relative addressing and IPOLL for cfam reset Eddie James
2024-02-26 16:53 ` [PATCH v2 21/31] fsi: aspeed: Use common master error handler Eddie James
2024-02-26 16:53 ` [PATCH v2 22/31] fsi: core: Add interrupt support Eddie James
2024-02-26 16:53 ` [PATCH v2 23/31] fsi: aspeed: " Eddie James
2024-02-26 16:53 ` [PATCH v2 24/31] fsi: hub: " Eddie James
2024-02-26 16:53 ` [PATCH v2 25/31] i2c: fsi: Calculate clock divider from local bus frequency Eddie James
2024-04-15 22:11 ` Andi Shyti
2024-04-16 18:09 ` Eddie James
2024-04-16 21:20 ` Guenter Roeck
2024-04-17 13:50 ` Eddie James
2024-02-26 16:53 ` [PATCH v2 26/31] i2c: fsi: Improve formatting Eddie James
2024-04-15 22:13 ` Andi Shyti
2024-02-26 16:53 ` [PATCH v2 27/31] i2c: fsi: Change fsi_i2c_write_reg to accept data instead of a pointer Eddie James
2024-02-26 16:53 ` [PATCH v2 28/31] i2c: fsi: Remove list structure of ports Eddie James
2024-02-26 16:53 ` [PATCH v2 29/31] i2c: fsi: Define a function to check status error bits Eddie James
2024-02-26 16:53 ` Eddie James [this message]
2024-02-26 16:53 ` [PATCH v2 31/31] i2c: fsi: Add interrupt support Eddie James
2024-02-27 13:44 ` [PATCH v2 00/31] fsi: Interrupt support Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240226165321.91976-31-eajames@linux.ibm.com \
--to=eajames@linux.ibm.com \
--cc=alistair@popple.id.au \
--cc=andi.shyti@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jk@ozlabs.org \
--cc=joel@jms.id.au \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=lakshmiy@us.ibmcom \
--cc=linux-fsi@lists.ozlabs.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox