From: Tony Luck <tony.luck@intel.com>
To: Fenghua Yu <fenghua.yu@intel.com>,
Reinette Chatre <reinette.chatre@intel.com>,
Peter Newman <peternewman@google.com>,
Jonathan Corbet <corbet@lwn.net>,
Shuah Khan <skhan@linuxfoundation.org>,
x86@kernel.org
Cc: Shaopeng Tan <tan.shaopeng@fujitsu.com>,
James Morse <james.morse@arm.com>,
Jamie Iles <quic_jiles@quicinc.com>,
Babu Moger <babu.moger@amd.com>,
Randy Dunlap <rdunlap@infradead.org>,
Drew Fustini <dfustini@baylibre.com>,
linux-kernel@vger.kernel.org, linux-doc@vger.kernel.org,
patches@lists.linux.dev, Tony Luck <tony.luck@intel.com>
Subject: [PATCH v15 7/8] x86/resctrl: Sub NUMA Cluster detection and enable
Date: Wed, 28 Feb 2024 11:37:02 -0800 [thread overview]
Message-ID: <20240228193717.8170-9-tony.luck@intel.com> (raw)
In-Reply-To: <20240228112935.8087-tony.luck@intel.com>
There isn't a simple hardware bit that indicates whether a CPU is
running in Sub NUMA Cluster (SNC) mode. Infer the state by comparing
the ratio of NUMA nodes to L3 cache instances.
When SNC mode is detected, reconfigure the RMID counters by updating
the MSR_RMID_SNC_CONFIG MSR on each socket as CPUs are seen.
Clearing bit zero of the MSR divides the RMIDs and renumbers the ones
on the second SNC node to start from zero.
Signed-off-by: Tony Luck <tony.luck@intel.com>
---
arch/x86/include/asm/msr-index.h | 1 +
arch/x86/kernel/cpu/resctrl/core.c | 119 +++++++++++++++++++++++++++++
2 files changed, 120 insertions(+)
diff --git a/arch/x86/include/asm/msr-index.h b/arch/x86/include/asm/msr-index.h
index f1bd7b91b3c6..f6ba7d0397b8 100644
--- a/arch/x86/include/asm/msr-index.h
+++ b/arch/x86/include/asm/msr-index.h
@@ -1119,6 +1119,7 @@
#define MSR_IA32_QM_CTR 0xc8e
#define MSR_IA32_PQR_ASSOC 0xc8f
#define MSR_IA32_L3_CBM_BASE 0xc90
+#define MSR_RMID_SNC_CONFIG 0xca0
#define MSR_IA32_L2_CBM_BASE 0xd10
#define MSR_IA32_MBA_THRTL_BASE 0xd50
diff --git a/arch/x86/kernel/cpu/resctrl/core.c b/arch/x86/kernel/cpu/resctrl/core.c
index cb181796f73b..65cec8c45047 100644
--- a/arch/x86/kernel/cpu/resctrl/core.c
+++ b/arch/x86/kernel/cpu/resctrl/core.c
@@ -21,7 +21,9 @@
#include <linux/err.h>
#include <linux/cacheinfo.h>
#include <linux/cpuhotplug.h>
+#include <linux/mod_devicetable.h>
+#include <asm/cpu_device_id.h>
#include <asm/intel-family.h>
#include <asm/resctrl.h>
#include "internal.h"
@@ -744,11 +746,42 @@ static void clear_closid_rmid(int cpu)
RESCTRL_RESERVED_CLOSID);
}
+/*
+ * The power-on reset value of MSR_RMID_SNC_CONFIG is 0x1
+ * which indicates that RMIDs are configured in legacy mode.
+ * This mode is incompatible with Linux resctrl semantics
+ * as RMIDs are partitioned between SNC nodes, which requires
+ * a user to know which RMID is allocated to a task.
+ * Clearing bit 0 reconfigures the RMID counters for use
+ * in Sub NUMA Cluster mode. This mode is better for Linux.
+ * The RMID space is divided between all SNC nodes with the
+ * RMIDs renumbered to start from zero in each node when
+ * couning operations from tasks. Code to read the counters
+ * must adjust RMID counter numbers based on SNC node. See
+ * __rmid_read() for code that does this.
+ */
+static void snc_remap_rmids(int cpu)
+{
+ u64 val;
+
+ /* Only need to enable once per package. */
+ if (cpumask_first(topology_core_cpumask(cpu)) != cpu)
+ return;
+
+ rdmsrl(MSR_RMID_SNC_CONFIG, val);
+ val &= ~BIT_ULL(0);
+ wrmsrl(MSR_RMID_SNC_CONFIG, val);
+}
+
static int resctrl_arch_online_cpu(unsigned int cpu)
{
struct rdt_resource *r;
mutex_lock(&domain_list_lock);
+
+ if (snc_nodes_per_l3_cache > 1)
+ snc_remap_rmids(cpu);
+
for_each_capable_rdt_resource(r)
domain_add_cpu(cpu, r);
mutex_unlock(&domain_list_lock);
@@ -988,11 +1021,97 @@ static __init bool get_rdt_resources(void)
return (rdt_mon_capable || rdt_alloc_capable);
}
+/* CPU models that support MSR_RMID_SNC_CONFIG */
+static const struct x86_cpu_id snc_cpu_ids[] __initconst = {
+ X86_MATCH_INTEL_FAM6_MODEL(ICELAKE_X, 0),
+ X86_MATCH_INTEL_FAM6_MODEL(SAPPHIRERAPIDS_X, 0),
+ X86_MATCH_INTEL_FAM6_MODEL(EMERALDRAPIDS_X, 0),
+ X86_MATCH_INTEL_FAM6_MODEL(GRANITERAPIDS_X, 0),
+ X86_MATCH_INTEL_FAM6_MODEL(ATOM_CRESTMONT_X, 0),
+ {}
+};
+
+/*
+ * There isn't a simple hardware bit that indicates whether a CPU is running
+ * in Sub NUMA Cluster (SNC) mode. Infer the state by comparing the
+ * ratio of NUMA nodes to L3 cache instances.
+ * It is not possible to accurately determine SNC state if the system is
+ * booted with a maxcpus=N parameter. That distorts the ratio of SNC nodes
+ * to L3 caches. It will be OK if system is booted with hyperthreading
+ * disabled (since this doesn't affect the ratio).
+ */
+static __init int snc_get_config(void)
+{
+ unsigned long *node_caches;
+ int mem_only_nodes = 0;
+ int cpu, node, ret;
+ int num_l3_caches;
+ int cache_id;
+
+ if (!x86_match_cpu(snc_cpu_ids))
+ return 1;
+
+ node_caches = bitmap_zalloc(num_possible_cpus(), GFP_KERNEL);
+ if (!node_caches)
+ return 1;
+
+ cpus_read_lock();
+
+ if (num_online_cpus() != num_present_cpus())
+ pr_warn("Some CPUs offline, SNC detection may be incorrect\n");
+
+ for_each_node(node) {
+ cpu = cpumask_first(cpumask_of_node(node));
+ if (cpu < nr_cpu_ids) {
+ cache_id = get_cpu_cacheinfo_id(cpu, 3);
+ if (cache_id != -1)
+ set_bit(cache_id, node_caches);
+ } else {
+ mem_only_nodes++;
+ }
+ }
+ cpus_read_unlock();
+
+ num_l3_caches = bitmap_weight(node_caches, num_possible_cpus());
+ kfree(node_caches);
+
+ if (!num_l3_caches)
+ goto insane;
+
+ /* sanity check #1: Number of CPU nodes must be multiple of num_l3_caches */
+ if ((nr_node_ids - mem_only_nodes) % num_l3_caches)
+ goto insane;
+
+ ret = (nr_node_ids - mem_only_nodes) / num_l3_caches;
+
+ /* sanity check #2: Only valid results are 1, 2, 3, 4 */
+ switch (ret) {
+ case 1:
+ break;
+ case 2:
+ case 3:
+ case 4:
+ pr_info("Sub-NUMA cluster detected with %d nodes per L3 cache\n", ret);
+ rdt_resources_all[RDT_RESOURCE_L3].r_resctrl.mon_scope = RESCTRL_NODE;
+ break;
+ default:
+ goto insane;
+ }
+
+ return ret;
+insane:
+ pr_warn("SNC insanity: CPU nodes = %d num_l3_caches = %d\n",
+ (nr_node_ids - mem_only_nodes), num_l3_caches);
+ return 1;
+}
+
static __init void rdt_init_res_defs_intel(void)
{
struct rdt_hw_resource *hw_res;
struct rdt_resource *r;
+ snc_nodes_per_l3_cache = snc_get_config();
+
for_each_rdt_resource(r) {
hw_res = resctrl_to_arch_res(r);
--
2.43.0
next prev parent reply other threads:[~2024-02-28 19:37 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-28 19:36 Cover-cover letter for two resctrl patch sets Tony Luck
2024-02-28 19:36 ` [PATCH v4 0/2] x86/resctrl: Pass domain to target CPU Tony Luck
2024-02-28 19:36 ` [PATCH v4 1/2] " Tony Luck
2024-03-04 23:07 ` Reinette Chatre
2024-03-05 0:17 ` Luck, Tony
2024-03-05 1:31 ` Reinette Chatre
2024-03-05 16:37 ` Luck, Tony
2024-03-05 16:48 ` Reinette Chatre
2024-03-08 18:26 ` James Morse
2024-03-08 18:50 ` Luck, Tony
2024-02-28 19:36 ` [PATCH v4 2/2] x86/resctrl: Simplify call convention for MSR update functions Tony Luck
2024-03-04 23:07 ` Reinette Chatre
2024-02-28 19:36 ` [PATCH v15 0/8] Add support for Sub-NUMA cluster (SNC) systems Tony Luck
2024-02-28 19:36 ` [PATCH v15 1/8] x86/resctrl: Prepare for new domain scope Tony Luck
2024-02-28 19:36 ` [PATCH v15 2/8] x86/resctrl: Prepare to split rdt_domain structure Tony Luck
2024-02-28 19:36 ` [PATCH v15 3/8] x86/resctrl: Prepare for different scope for control/monitor operations Tony Luck
2024-02-28 19:36 ` [PATCH v15 4/8] x86/resctrl: Split the rdt_domain and rdt_hw_domain structures Tony Luck
2024-02-28 19:37 ` [PATCH v15 5/8] x86/resctrl: Add node-scope to the options for feature scope Tony Luck
2024-02-28 19:37 ` [PATCH v15 6/8] x86/resctrl: Introduce snc_nodes_per_l3_cache Tony Luck
2024-02-28 19:37 ` Tony Luck [this message]
2024-02-28 19:37 ` [PATCH v15 8/8] x86/resctrl: Update documentation with Sub-NUMA cluster changes Tony Luck
2024-03-04 23:07 ` Cover-cover letter for two resctrl patch sets Reinette Chatre
2024-03-05 22:02 ` Konstantin Ryabitsev
2024-03-05 22:27 ` Luck, Tony
2024-03-06 3:11 ` Konstantin Ryabitsev
2024-03-05 7:28 ` Maciej Wieczor-Retman
2024-03-05 17:51 ` Luck, Tony
2024-03-06 7:22 ` Maciej Wieczor-Retman
2024-03-06 7:28 ` Maciej Wieczor-Retman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240228193717.8170-9-tony.luck@intel.com \
--to=tony.luck@intel.com \
--cc=babu.moger@amd.com \
--cc=corbet@lwn.net \
--cc=dfustini@baylibre.com \
--cc=fenghua.yu@intel.com \
--cc=james.morse@arm.com \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=patches@lists.linux.dev \
--cc=peternewman@google.com \
--cc=quic_jiles@quicinc.com \
--cc=rdunlap@infradead.org \
--cc=reinette.chatre@intel.com \
--cc=skhan@linuxfoundation.org \
--cc=tan.shaopeng@fujitsu.com \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox