From: Stefan Berger <stefanb@linux.ibm.com>
To: keyrings@vger.kernel.org, linux-crypto@vger.kernel.org,
herbert@gondor.apana.org.au, davem@davemloft.net
Cc: linux-kernel@vger.kernel.org, saulo.alessandre@tse.jus.br,
lukas@wunner.de, Stefan Berger <stefanb@linux.ibm.com>
Subject: [PATCH v4 01/12] crypto: ecdsa - Convert byte arrays with key coordinates to digits
Date: Thu, 29 Feb 2024 21:19:56 -0500 [thread overview]
Message-ID: <20240301022007.344948-2-stefanb@linux.ibm.com> (raw)
In-Reply-To: <20240301022007.344948-1-stefanb@linux.ibm.com>
For NIST P192/256/384 the public key's x and y parameters could be copied
directly from a given array since both parameters filled 'ndigits' of
digits (a 'digit' is a u64). For support of NIST P521 the key parameters
need to have leading zeros prepended to the most significant digit since
only 2 bytes of the most significant digit are provided.
Therefore, implement ecc_digits_from_bytes to convert a byte array into an
array of digits and use this function in ecdsa_set_pub_key where an input
byte array needs to be converted into digits.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
---
crypto/ecdsa.c | 14 +++++++++-----
include/crypto/internal/ecc.h | 25 +++++++++++++++++++++++++
2 files changed, 34 insertions(+), 5 deletions(-)
diff --git a/crypto/ecdsa.c b/crypto/ecdsa.c
index fbd76498aba8..6653dec17327 100644
--- a/crypto/ecdsa.c
+++ b/crypto/ecdsa.c
@@ -222,9 +222,8 @@ static int ecdsa_ecc_ctx_reset(struct ecc_ctx *ctx)
static int ecdsa_set_pub_key(struct crypto_akcipher *tfm, const void *key, unsigned int keylen)
{
struct ecc_ctx *ctx = akcipher_tfm_ctx(tfm);
+ unsigned int digitlen, ndigits;
const unsigned char *d = key;
- const u64 *digits = (const u64 *)&d[1];
- unsigned int ndigits;
int ret;
ret = ecdsa_ecc_ctx_reset(ctx);
@@ -238,12 +237,17 @@ static int ecdsa_set_pub_key(struct crypto_akcipher *tfm, const void *key, unsig
return -EINVAL;
keylen--;
- ndigits = (keylen >> 1) / sizeof(u64);
+ digitlen = keylen >> 1;
+
+ ndigits = DIV_ROUND_UP(digitlen, sizeof(u64));
if (ndigits != ctx->curve->g.ndigits)
return -EINVAL;
- ecc_swap_digits(digits, ctx->pub_key.x, ndigits);
- ecc_swap_digits(&digits[ndigits], ctx->pub_key.y, ndigits);
+ d++;
+
+ ecc_digits_from_bytes(d, digitlen, ctx->pub_key.x, ndigits);
+ ecc_digits_from_bytes(&d[digitlen], digitlen, ctx->pub_key.y, ndigits);
+
ret = ecc_is_pubkey_valid_full(ctx->curve, &ctx->pub_key);
ctx->pub_key_set = ret == 0;
diff --git a/include/crypto/internal/ecc.h b/include/crypto/internal/ecc.h
index 4f6c1a68882f..48a04605da7f 100644
--- a/include/crypto/internal/ecc.h
+++ b/include/crypto/internal/ecc.h
@@ -56,6 +56,31 @@ static inline void ecc_swap_digits(const void *in, u64 *out, unsigned int ndigit
out[i] = get_unaligned_be64(&src[ndigits - 1 - i]);
}
+/**
+ * ecc_digits_from_bytes() - Create ndigits-sized digits array from byte array
+ * @in: Input byte array
+ * @nbytes Size of input byte array
+ * @out Output digits array
+ * @ndigits: Number of digits to create from byte array
+ */
+static inline void ecc_digits_from_bytes(const u8 *in, unsigned int nbytes,
+ u64 *out, unsigned int ndigits)
+{
+ unsigned int o = nbytes & 7;
+ u64 msd = 0;
+ size_t i;
+
+ if (o == 0) {
+ ecc_swap_digits(in, out, ndigits);
+ } else {
+ /* if key length is not a multiple of 64 bits (NIST P521) */
+ for (i = 0; i < o; i++)
+ msd = (msd << 8) | in[i];
+ out[ndigits - 1] = msd;
+ ecc_swap_digits(&in[o], out, (nbytes - o) >> 3);
+ }
+}
+
/**
* ecc_is_key_valid() - Validate a given ECDH private key
*
--
2.43.0
next prev parent reply other threads:[~2024-03-01 2:20 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-03-01 2:19 [PATCH v4 00/12] Add support for NIST P521 to ecdsa Stefan Berger
2024-03-01 2:19 ` Stefan Berger [this message]
2024-03-01 20:36 ` [PATCH v4 01/12] crypto: ecdsa - Convert byte arrays with key coordinates to digits Jarkko Sakkinen
2024-03-02 21:34 ` Lukas Wunner
2024-03-03 6:37 ` James Bottomley
2024-03-03 16:34 ` Stefan Berger
2024-03-01 2:19 ` [PATCH v4 02/12] crypto: ecdsa - Adjust tests on length of key parameters Stefan Berger
2024-03-01 2:19 ` [PATCH v4 03/12] crypto: ecdsa - Extend res.x mod n calculation for NIST P521 Stefan Berger
2024-03-01 2:19 ` [PATCH v4 04/12] crypto: ecc - Implement vli_mmod_fast_521 for NIST p521 Stefan Berger
2024-03-03 11:05 ` Lukas Wunner
2024-03-03 16:29 ` Stefan Berger
2024-03-01 2:20 ` [PATCH v4 05/12] crypto: ecc - Add nbits field to ecc_curve structure Stefan Berger
2024-03-03 11:07 ` Lukas Wunner
2024-03-03 16:32 ` Stefan Berger
2024-03-01 2:20 ` [PATCH v4 06/12] crypto: ecc - Add special case for NIST P521 in ecc_point_mult Stefan Berger
2024-03-01 2:20 ` [PATCH v4 07/12] crypto: ecc - Add NIST P521 curve parameters Stefan Berger
2024-03-01 2:20 ` [PATCH v4 08/12] crypto: ecdsa - Replace ndigits with nbits where precision is needed Stefan Berger
2024-03-01 2:20 ` [PATCH v4 09/12] crypto: ecdsa - Rename keylen to bufsize where necessary Stefan Berger
2024-03-01 20:41 ` Jarkko Sakkinen
2024-03-01 20:47 ` Stefan Berger
2024-03-01 20:50 ` Jarkko Sakkinen
2024-03-01 21:20 ` Stefan Berger
2024-03-01 2:20 ` [PATCH v4 10/12] crypto: ecdsa - Register NIST P521 and extend test suite Stefan Berger
2024-03-01 2:20 ` [PATCH v4 11/12] crypto: asymmetric_keys - Adjust signature size calculation for NIST P521 Stefan Berger
2024-03-03 18:47 ` Lukas Wunner
2024-03-03 21:03 ` Stefan Berger
2024-03-01 2:20 ` [PATCH v4 12/12] crypto: x509 - Add OID for NIST P521 and extend parser for it Stefan Berger
2024-03-04 18:10 ` [PATCH v4 00/12] Add support for NIST P521 to ecdsa Lukas Wunner
2024-03-04 19:01 ` Stefan Berger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240301022007.344948-2-stefanb@linux.ibm.com \
--to=stefanb@linux.ibm.com \
--cc=davem@davemloft.net \
--cc=herbert@gondor.apana.org.au \
--cc=keyrings@vger.kernel.org \
--cc=linux-crypto@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lukas@wunner.de \
--cc=saulo.alessandre@tse.jus.br \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox