[PATCH v1 1/3] ARM: pxa: spitz: Open code gpio_request_array()

Andy Shevchenko
2024-03-07T13:51:19Z

In order to prerare for removal of gpio_request_array(), open code
the latter. Note, we are not using gpio_request_one() as it's also
deprecated, hence reducing legacy API usage to the very basic ones.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
arch/arm/mach-pxa/spitz_pm.c | 22 ++++++++++++----------
1 file changed, 12 insertions(+), 10 deletions(-)

diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c
index 8bc4ea51a0c1..03b4b347f11a 100644
--- a/arch/arm/mach-pxa/spitz_pm.c
+++ b/arch/arm/mach-pxa/spitz_pm.c
@@ -35,18 +35,20 @@

static int spitz_last_ac_status;

-static struct gpio spitz_charger_gpios[] = {
- { SPITZ_GPIO_KEY_INT, GPIOF_IN, "Keyboard Interrupt" },
- { SPITZ_GPIO_SYNC, GPIOF_IN, "Sync" },
- { SPITZ_GPIO_AC_IN, GPIOF_IN, "Charger Detection" },
- { SPITZ_GPIO_ADC_TEMP_ON, GPIOF_OUT_INIT_LOW, "ADC Temp On" },
- { SPITZ_GPIO_JK_B, GPIOF_OUT_INIT_LOW, "JK B" },
- { SPITZ_GPIO_CHRG_ON, GPIOF_OUT_INIT_LOW, "Charger On" },
-};
-
static void spitz_charger_init(void)
{
- gpio_request_array(ARRAY_AND_SIZE(spitz_charger_gpios));
+ gpio_request(SPITZ_GPIO_KEY_INT, "Keyboard Interrupt");
+ gpio_direction_input(SPITZ_GPIO_KEY_INT);
+ gpio_request(SPITZ_GPIO_SYNC, "Sync");
+ gpio_direction_input(SPITZ_GPIO_SYNC);
+ gpio_request(SPITZ_GPIO_AC_IN, "Charger Detection");
+ gpio_direction_input(SPITZ_GPIO_AC_IN);
+ gpio_request(SPITZ_GPIO_ADC_TEMP_ON, "ADC Temp On");
+ gpio_direction_output(SPITZ_GPIO_ADC_TEMP_ON, 0);
+ gpio_request(SPITZ_GPIO_JK_B, "JK B");
+ gpio_direction_output(SPITZ_GPIO_JK_B, 0);
+ gpio_request(SPITZ_GPIO_CHRG_ON, "Charger On");
+ gpio_direction_output(SPITZ_GPIO_CHRG_ON, 0);
}

static void spitz_measure_temp(int on)
--
2.43.0.rc1.1.gbec44491f096